Clearwater Tech Logo
Loading
Home | Contact Us
(800) 894-0412

Kubler

Home   >   Products   >   Kuebler   >   Limes   >   LI20 / B1   >   Linear Measuring Systems

Kubler

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

Limes LI20 / B1

The non-contact incremental magnetic linear measurement system LI20 / B1 - made up of the sensor head LI20 and of the magnetic band B1 - reaches a resolution up to 10 µm with a maximum distance of 1 mm between the sensor and the band.

  • Sturdy housing with IP67 protection. Option: special housing for maximum resistance against condensation (IP68 / IP69k, resistance to cyclic humidity acc. to EN 60068-3-38 as well as damp heat acc. to EN 60068-3-78)
  • Non-contact measuring system - free from wear
  • Masking tape protecting the magnetic band
  • Simple glued assembly of the magnetic band
  • Large mounting tolerances
  • Requires very little installation space
  • Warning signals via LED if the magnetic field is too weak
Kuebler Limes LI20/B1 Incremental Measurement System Sensor Head, Magnetic Band Resolution min. 10 µm Distributors
Type LI20 / B1

If you are looking for Kuebler LI20/B1 Linear Measuring Systems, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Kubler LI20 sensor head that you are looking for at the most competitive prices possible. If you are searching for Kubler LI20 magnetic band technical information (data-sheets) please use the datasheets or product selection guide page links.

A new version is available for outdoor use with extremely sturdy aluminium housing and stainless-steel cover, wide temperature range as well as a UV-resistant cable. IP68 / IP69k protection, special encapsulation technology and tested resistance to cyclic humidity and damp heat offer the highest levels of reliability, even in exposed outdoor use.

With the LIMES LI20 and LI50 Kubler is presenting a new generation of measuring heads in a particularly solid die-cast housing. Used in conjunction with its magnetic bands with their stainless-steel covering, the resulting linear measurement system stays sealed even in harsh industrial environments and offers security against failures in the field.

The magnetic rings offer the user a remarkably compact measurement system for rotary applications where installation space is very tight. Installation depths of only 16mm are possible with a large hollow shaft of 30mm. The combination of rings and bands plus Kubler's flexible manufacturing facilities open up a wide spectrum of different geometries that can be scanned, such as for example pitch circles or curves.

The non-contact technology ensures high vibration and shock resistance. The products can also be used outdoors, thanks to the high IP67 protection rating, the permitted 100% humidity with condensation, the wide temperature range and the weatherproof die-cast housing. The metal housing also offers improved shielding against electromagnetic interference.

Installation can be carried out very easily due to the large permitted tolerances of up to 1mm, which apply not only to the distance from band to sensor head but also for lateral misalignment, as well as to the built-in LED, which gives a red warning signal if the distance from the band to the reading head is too great or if the speed is too high. A green light shows the index pulse. The wide supply voltage range from 4.8 to 30 VDC likewise facilitates installation. The connections are made via a high-grade shielded PUR cable that is also suitable for trailing cable applications.

The sensing head is available either with a push-pull output or an RS422 interface and supplies two channels plus a periodic index with the corresponding inverted channels. The resolution is up to 5 mm with quadruple evaluation and the repeat accuracy is +/- one increment. The maximum traversing speed is 25m/s.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Kuebler products enabling us to further assist you in finding the correct Limes LI20 / B1 sensor head for your application in the USA, Canada and Mexico. Whether we have LI20/B1 linear measurement system in stock in Boise, Idaho or need to ship direct from Kubler Germany to any USA cities; Clearwater Tech can get LI20 / B1 magnetic band to you fast! It will be very helpful if you have the Limes LI20/B1 incremental measurement system part numbers ready, then our sales representatives can provide you with a pricing and availability quote for LI20 sensor head that you are looking for in seconds. If you do not have the part numbers for Kubler Limes LI20/B1 linear measuring systems, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us.

EPC Encoders

The New TR3 Heavy Duty Tru-Trac by Encoder Products Company is an integrated heavy duty encoder and spring loaded measuring wheel assembly all in one, easy-to-use, compact unit. Available in a single, or optional dual-wheel format, the TR3 Heavy Duty Tru-Trac is a versatile solution for tracking velocity, position or distance over a wide variety of surfaces in almost any industrial application. Its spring loaded torsion arm

Sentrol Switches

Edwards Signaling 1275 series 3/8" DIA. wing fit magnetic contact is ideal for new construction applications, where wood swell poses a potential threat to the contact housing. The "wings" on the 1275 Series flex to hold the contact securely in place as the wood expands and contracts. The 1" contact fits most recessed applications. Housing is made of flame-retardant polypropylene. Ideal for use in green wood, where normal swelling can crush a reed contact.