LEESON Electric

Home   >   Products   >   LEESON   >   Gear Reducers

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

• 6 sizes available in reducer, gear+motor, and integral gearmotor designs.
• Input horsepower ratings to 130 HP.
• Available in triple and quintuple reduction with ratios from 6.2:1 to 3400:1.
• Solid output shaft and hollow output shaft available in all sizes.
• High capacity ball and tapered bearings provide long life and trouble free operation.
• Mounting dimensions allow interchange with many popular reducers including SEW, David Brown, Nord and Dodge.
• Permanently marked nameplate with output torque ratio and maximum input horsepower.
• Cast iron input flange (motorized quill input styles) with machined fits for precision alignment of motor and bearings.

If you are looking for LEESON Gear Reducers, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Bravo Aluminum Gear Reducer that you are looking for at the lowest prices possible. If you are searching for Grove-Gear Ironman Gear Reducers technical information (data-sheets) please use the Electra-Gear Reducer Datasheets OR Product Selection Guide page links.

• 4 sizes available in reducer, Gear+Motor and integral gearmotor designs.
• Input horsepower ratings up to 17 HP.
• Available in double, triple and quadruple reduction with ratios from 7:1 to 3400:1.
• Solid output shaft and hollow output shaft available in all sizes.
• High capacity ball and tapered bearings provide long life and trouble free operation.
• Mounting dimensions allow interchange with many popular reducers including SEW, David Brown, Nord and Dodge.
• Permanently marked nameplate with output torque ratio and maximum input horsepower.
• Cast iron input flange (motorized quill input styles) with machined fits for precision alignment of motor and bearings.

• 4 sizes available in reducer, gear+motor, and integral gearmotor designs.
• Input horsepower ratings to 20 HP.
• Available in double, triple and QUINTuple reduction with ratios from 3.42:1 to 3333:1.
• Base mount and output flange designs available in all sizes.
• High capacity ball and tapered bearings provide long life and trouble free operation.
• Mounting dimensions allow interchange with many popular reducers including SEW, David Brown, Nord and Dodge.
• Permanently marked nameplate with output torque ratio and maximum input horsepower.
• Cast iron input flange (motorized quill input styles) with machined fits for precision alignment of motor and bearings.

• Power ratings from 1/4 to 20 HP
• Ratios from 3.42:1 thru 3333:1
• Output speeds .5 rpm to 280 rpm
• Universal base, flange and hollow bore mounting with competitive interchange capability
• Precision carburized and hardened crowned helical gearing
• Double lip spring loaded seals with precision ground seal journals
• High capacity ball and tapered bearings with splash lubrication, factory filled
• Enhanced high tensile strength steel shafting with low notch sensitivity
• Optimum structural designed housings made of high strength alloy case iron

• LeCentric inline reducers available in four sizes with ratings to 15 HP and in ratios from 3.5:1 to 280:1
• Fit into small spaces. Up to one third smaller than other brands
• Sealed for life, never change or add oil
• Lightweight OEM design suitable for mobile equipment and difficult installations
• Mounting dimensions are interchangeable with most major worldwide competitors

• One-piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment.
• Viton double-lip seals and super microfinished seal surfaces on input and output shafts.
• Extra large lubricant reservoir filled with premium, high-temperature synthetic lubricant.
• One-piece, precision finished worms for higher efficiency and long-life operation.
• Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
• Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.
• Tapered roller bearings on output shaft for high overhung and thrust load capacities.
• Directly interchangeable with other brands of cast iron worm reducers, including Baldor, Boston, Browning, Dodge and Morse.

• Replacement for Grove Gear OE Series and Alling Lander worm gear reducers.
• The worm shaft is cut integral with the input shaft then hardened, ground, and polished to provide maximum efficiency with minimum gear noise.
• The unique quill seal guard protects the input seal from damage during motor installation.
• O-rings on input and output covers provide positive sealing without undependable gaskets or messy silicone sealants.
• Large oil capacity provides positive splash lubrication and superior cooling capability.
• All units are 100% run and leak tested at the factory to insure that you receive the highest quality product.
• 14 sizes available with input horsepower ratings up to 104 HP.
• Available in single, double and triple reduction with ratios from 5:1 to 216,000:1. Helical worm ratios from 25:1 to 600:1.

All new stock and custom 800 Series Grove Gear and Electra-Gear worm reducers are identified by a model number. The model number appears on the nameplate and describes pertinent features of the reducer. An example follows, along with a listing of the various letters and positions used.

All reducers also have a catalog number for example EL8130001 and GR8130001. Reducers and renewal parts should be ordered by catalog number. If a stock reducer has been Factory modified by the addition of an optional base for example, the modification number T818, for example, is stamped in the blank column of the nameplate. Accessories that are field installed will not be noted on the nameplate.

• Viton double-lip seals are up to five times more durable than nitrile seals and provide added resistance to chemicals common in washdown applications
• Patented Forsheda V-ring on output shaft provides extra protection from high pressure water spray and other contaminants
• O-ring on "flat-faced" input flange provides a positive seal against moisture intrusion
• Stainless steel output shaft is corrosion resistant for long life
• O-rings on input and output covers eliminate gaskets, sealants and leaks
• Food grade white epoxy paint
• Food-Grade Synthetic Lubricant, Mobil SHC634, meets USDA Class H2 standards
• Enviroseal feature provides a vent-free and "sealed for life" design
• Washguard Gear+Motor combinations are available up to 1 ½ HP

In addition to the thousands of stock/standard Grove Gear Ironman products available from Grove Gear, there are also many special reducer configurations possible. Some of the special features available are listed below.

• Special Paint
• Custom Mounting Brackets/Bases
• Longer/Shorter Shaft Extensions
• Special Shaft Extension Diameters
• Cross-drilled Holes on Shafts
• Custom Ratios
• Stainless-Steel Hollow Output Shafts
• Reduced Backlash Designs
• Dual Input Shaft Extensions

All stock and custom 500 series reducers are identified by a model number. The model number appears on the nameplate and describes pertinent features of the reducer. All reducers also have a catalog number for example W5180001. Reducers and renewal parts should be ordered by catalog number. If a stock reducer has been factory modified by the addition of an optional base for example, the modification number T518, for example, is stamped in the blank column of the nameplate.

Accessories that are field installed will not be noted on the nameplate. Catalog numbers 5000 (for example, W5185000) and higher are custom reducers manufactured for a specific application. The machinery or equipment manufacturer should be contacted for replacement reducers. Renewal parts can be ordered from Grove Gear by catalog number.

• Viton double-lip seals are up to five times more durable than nitrile seals and provide added resistance to chemicals common in washdown applications
• Patented Forsheda V-ring on output shaft provides extra protection from high pressure water spray and other contaminants
• O-ring on "flat-faced" input flange provides a positive seal against moisture intrusion
• Stainless steel output shaft is corrosion resistant for long life
• O-rings on input and output covers eliminate gaskets, sealants and leaks
• Food grade white epoxy paint
• Food-Grade Synthetic Lubricant, Mobil SHC634, meets USDA Class H2 standards
• Enviroseal feature provides a vent-free and "sealed for life" design

• One-piece aluminum housings with single output cover design, CNC machined for precise component fit and alignment.
• Viton double-lip seals and super microfinished seal surfaces on input and output shafts.
• O-rings on all bearing covers, eliminating gaskets, sealants and leaks.
• Extra large lubricant reservoir filled with premium, high-temperature synthetic lubricant.
• One-piece, precision finished worms for higher efficiency and long-life operation.
• Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life.
• Oversized high-speed bearings, positively retained for frequent reversing and start/stop cycles.
• Tapered roller bearings on output shaft for high overhung and thrust load capacities.
• Ultimate application flexibility with all-angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles.
• Directly interchangeable with other brands of worm reducers, including Baldor, Boston, Browning, Dodge and Morse.

Any of the modified stock gear reducers are available on a quick-shipment basis, factory assembled by the Grove Gear Mod-Squad at no charge for the labor. Just pay for the accessory item. To order, specify the stock reducer and the Gear Mod-Squad Service Number. Or assemble it yourself by ordering the appropriate stock reducer and accessory kit. Before ordering, check the dimensional information available. More Grove Gear BRAVO accessories, options and assembly services are available.

Our LEESON Electric distributors warehouse in Boise, Idaho stocks some LEESON Gear Reducer Products enabling us to further assist you in finding the correct Grove-Gear Single Reduction Right Angle Worm Gear Reducer for your application in the USA (Alabama Alaska Arizona Arkansas California Colorado Connecticut Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington Washington D.C. West Virginia Wisconsin Wyoming), Canada and Mexico. To learn about how LEESON motors operate, please follow AC Motor Applications page link.

Whether we have Ironman Worm-Worm Right Angle Worm Gear Reducer in stock in Boise, Idaho or need to ship direct from LEESON Electric to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); Clearwater Tech can get Electra-Gear Helical-Worm Right Angle Worm Gear Reducer to you fast and save money!

It will be very helpful if you have the LEESON Gear Reducer part numbers ready, then our sales representatives can provide you with a pricing and availability quote for WASHGUARD & Stainless Steel Worm Gear Reducer that you are looking for in seconds. If you do not have the part numbers for Bravo Aluminum Worm Gear Reducers, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.