ABB's Drive Lifecycle Management Model provides customers
with the maximum profit for the purchased assets by maintaining high availability, eliminating unplanned
repair costs and extending drive lifetime. The lifecycle management model comprises many dedicated
services for the entire lifecycle of ACS800 drives. Using ABB's start-up services you can trust that your
drives are correctly commissioned and tuned to their application.
As a High Degree of Protection (IP54 or higher) can
easily be achieved with these drives, they can be installed almost anywhere in a plant or on a vessel.
This eliminates the load on air-conditioning systems in electrical rooms reducing costs and installation
time, and makes them ideal for retrofitting. Servicing is fast and easy. Features such as safe torque off
(STO) and safe stop 1 (SS1) improve safety, and conformal coated circuit boards enhance reliability.
The KLR/KDR Line Reactor is a 3-phase device and should be wired in a series and positioned on
the input side of the VFD. All Terminal Block connectors will be marked. A1, B1, and C1 are the
input terminals where the 3 phases of incoming power are to be wired. As a result, A2, B2, and C2
are the output terminals. Units with copper bus or ring lug terminals are not marked.
KDR Optimized Load Reactors applied to the line side of a PWM drive will greatly improve the
overall performance of the drive. The additional circuit inductance will reduce AC voltage
waveform line notching, DC bus overvoltage trips, inverter overvoltage, poor total power factor,
Power quality has degraded over time due to the increased use of non-linear loads. Drives and
other sensitive devices are vulnerable to electrical distortion on the line.
If you are looking for Line Reactors, please call us on
(800) 894 - 0412 or email us at
will do our best to help you find the TCI Harmonic Filters that you are looking for at the most competitive prices possible. If you
are searching for Sola Hevi Duty Line Reactor technical information (data-sheets) please use the
Literature page link.
The SLR Series Sola power conditioner is a CE style, DIN Rail mounted line reactor that provides safe,
compact protection for high frequency drives and electronic equipment. Sola HD SLR series power conditioner inductive filter
prevents damage to any three phase electronic system plagued by capacitor or large load switching. Other benefits include reduced
harmonics and input line distortion.
Compact, IP 20 finger safe packaging
Reduces stress on drive components keeping drives running longer
DIN Rail mount through 20HP & 2-20 HP available
Eliminates drive cross-talk and interference
Removes harmonics and helps keep line voltage smooth through notching
Reduces nuisance tripping to provide stable system performance
Utilizing VFDs to control motor speed has impacted industry both in energy savings and increased efficiencies.
The challenge for today's designers is dealing with non-linear wave shapes generated by solid-state devices. By choosing a
Hammond RM series line reactor, many line problems such as nuisance tripping, line notching, harmonic distortion can be reduced
or even eliminated. Additionally, performance, life expectancy and efficiency of both the motor and the drive itself are
significantly enhanced. Hammond Power Solution's RM series line reactors are available in standard ratings from 2 amps to 1200
amps (or 0.5HP to 1200HP).
The only passive harmonic filter designed for 3-phase VFD's operating on a 1-phase supply. In remote locations such as farms, golf courses, oil and gas fields and
residential areas standard 3-phase Variable Speed Drives are often used as Phase Converters to supply 3-phase motors when only 1-phase power is available. The Lineator 1Q3 is ideal for
systems such as water and waste water, pump jacks, irrigation and many others.
The Lineator-1Q3 has been designed to address this application by accepting 1-phase input and supplying a quasi 3-phase supply to the VFD. This will significantly
lower both input harmonic current distortion (by up to 10x) and DC ripple current within the VFD. Reducing the ripple current allows for less derating of the VFD which, in many cases,
will offset the cost of the Lineator-1Q3.
Our Line Reactors Distributors warehouse in Boise, Idaho stocks some Harmonic Filter products enabling us to
further assist you in finding the correct TCI Line Reactors in the USA. Whether we have Line Reactors in stock in Boise, Idaho
USA or need to ship direct from factory to any USA cities; Clearwater Tech can get TCI Harmonic Filters to you fast and save
you some money! It will be very helpful if you have the Hammond Line Reactors part numbers ready, then our sales
representatives can provide you with a pricing and availability quote for Sola Power Conditioners that you are looking for in
seconds. If you do not have the part numbers for TCI Line Reactors, our application engineers will be able to help you figure
out the part numbers and get the price quote to you as soon as possible.