SymCom / SUNX / TURCK

Home   >   Products   >   Liquid Level Sensors

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

The PumpSaver Model 460-15-100-LLS is a liquid level sensor to detect the presence of conductive liquids. The unit has an adjustable debounce timer (2-60 seconds) to help prevent nuisance relay actuations due to waves or liquid splashing into the tank.

When the probe is submersed, the PumpSaver's output contacts will change state as soon as the debounce time expires.

Relay logic can be inverted so the PumpSaver's output contacts change state when the probe is no longer submersed.

If you are looking for Liquid Level Sensors, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the SymCom Liquid Level Sensors that you are looking for at the most competitive prices possible. If you are searching for SUNX Liquid Level Switches technical information (data-sheets) please use the Literature page link.

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

SUNX EX-F1 is a liquid level sensor with an integrated amplifier, thus there is no need to install a separate amplifier. Just attach it to a tube with two tying bands. The position can be easily changed with the release lever even after mounting, so that there is no need to cut the tying bands.

Either Light-ON or Dark-ON can be selected by a switch. This is useful to check the operation during installation because it forces the output to be turned ON or OFF even without the liquid being inside the pipe. The built-in output indicator allows for quick verification of the output condition.

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

TURCK offers liquid level probes for use in conjunction with our level control monitors, to provide a simple solution for liquid level applications.

The resistance between the terminals is measured to determine the level of the medium in the tank. The level control logic is built into the controller, which offers a variety of options to fit any application.

• Adjustable Sensitivity
• Single Set-points
• Multiple Inputs
• On/Off Delay
• Programmable Outputs

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

Banner U-GAGE QT50U Series - Long-Range Programmable Ultrasonic Sensors

• Senses extended range of up to 8 m
• Features ultrasonic dead-zone of only 2.5% of the total range-75% less than comparable products
• Available in analog or discrete dc models and in ac/dc universal voltage models with electromechanical relay output
• Features a completely sealed, shock-resistant housing that is ideal for monitoring levels of liquids as well as solids
• Uses a narrow sensing beam to detect targets at long range within confined areas-such as a storage tank-without interference from the tank walls
• Available in chemically resistant models with a Teflon coating to protect the transducer
• Compensates for temperature, for greatest sensing accuracy
• Simplifies setup with push-button and remote TEACH-mode programming
• Shows status during setup and operation, using highly visible LEDs indicators

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

CONTRINEX series 1000 photoelectric proximity switch features a great variety of sizes and functions in widely used standardized cylindrical housings (smooth and threaded types). It will be available in the following sizes: 4 mm, M5, 6.5 mm, M8, M12 and M18. Devices 4 mm and M5 are the smallest self-contained photoelectric proximity switches on the market. They are intended to replace larger models in case of space problems, and optical fibers if their application is too complicated. They may even be used instead of the same size inductive switches if the operating distances of the latter are insufficient.

The series 1000 now also includes laser devices in sizes M12 and M18, which compared to conventional LED through-beam sensors, are distinguished by a narrowly collimated red laser beam. The latter allows for the detection of very small objects across a large distance.

(800) 894-0412       (888) 723-4773 (Fax)
info@ctiautomation.net

The range of measurement and inspection devices is enriched thanks to the introduction of new ultrasonic M18x1 ABS tubular sensors of Datasensor US18 series. Models with axial or radial acoustic emission and with discrete bipolar output (1 NPN and 1 PNP) or with 4-20 mA or 0-10 V analogue output are available.

The extremely reduced blind zone and the unequalled 5 ms response speed are only two of the many features that are worth highlighting. The sensors are easily configured through the Teach-in function, while the operating status is visibly signalled by 2 bi-coloured LEDs. The temperature compensation function corrects the sound speed changes due to temperature variations, so the sensor precision remains unchanged in all situations and a 0.5 mm resolution is guaranteed.

(800) 894-0412       (888) 723-4773 (Fax)
info@ctiautomation.net

Leuze Ultrasonic Sensors

• Distance measurement using the ultrasonic principle
• Measurement ranges to 6000mm
• Distance information largely independent of surface properties
• Models HRTU 418M/V and VRTU 430M/V can be configured via PC software and programming terminal
• Outputs:
  • 2 switching outputs
  • analogue current output
  • analogue voltage output
• Operating principles:
  • LSU models
  • RKU models
  • HRTU models with background suppression
  • VRTU models with foreground and background suppression