Clearwater Tech Logo
Home | Contact Us |
(800) 894-0412


Home   >   Products   >   Phasetronics   >   ME2 Series   >   AC Drives


(800) 894-0412       (888) 723-4773 (Fax)

ME2 Series Micro AC Drives

The ME2 Series is a compact AC drive that, depite its small size, has the features you need. With 150% overload capacity for one minute, the ME2 Series is fully rated and fully protected. Protection features include UL listed solid state overload, overvoltage, undervoltage, power loss ride-thru, stall prevention, short circuit, ground fault protection and heat sink overtemp sensing. Designed to perfom, the ME2 Series offers FWD and REV inputs, plus two multi-function inputs which can be programmed for job, emergency stop, reset and preset speed. A multi-function N.O. relay output contact is available for indicating fault, at speed/frequency or run. Even DC injection braking is standard in the ME2 Series.

The ME2 Series takes up less panel space than other drives in its class and, with single phase power input as standard, wiring time is minimal. All of the wiring terminals are easily accessible without removing any covers, yet "finger safe" to meet IEC standards.

Motortronics ME2 Series Micro AC Inverters Distributors
ME2 Series

If you are looking for Motortronics AC Drives, please call us at (800) 894-0412 or email us at we will do our best to help you find the Motortronics ME2 Series Micro Drive that you are looking for at the most competitive prices possible. If you are searching for Phasetronics ME2 Series Inverter technical information (data-sheets) please use the datasheets or product selection guide page links.

The ME2 Series is a standard IP20 chassis with an optional DIN rail adapter (1HP and below) for mounting versatility. Unlike some micro drives on the market today, the ME2 Series comes standard with a built-in "finger-sized" keypad operator. No hand-held programmers, pens or tiny screw drivers are needed for set up. Simply press the up down arrows to program the drive. The ME2 Series drive can be operated either directly via the keypad or remotely via a PLC, analog inputs or a 10k potentiometer.

This fully digital AC drive that is easy to use "right out of the box," comes complete with a built-in keypad operator and analog inputs. The EMI filter is also an integral part of all models (up to 1 HP), so no external filter packs or inductors are necessary to meet CE requirements. The ME2 Series is ideally suited for use on equipment for export since it has all the credentials for worldwide acceptance.

It makes sense to use the ME2 Series in traditional DC drive and mechanical reversing starter applications. Priced right, the ME2 Series is a practical alternative that allows you to use a standard AC motor instead of "maintenance prone" brush-type motors. You can use a ME2 Series drive with a standard AC motor and get the performance you need for nearly any application. The ME2 Series is also ideal for high duty cycle, reversing applications as a cost effective alternative to mechanical reversing starters.

Model Number Input Voltage (+10%/-15%) Output Voltage Motor Rating Rated Current (Amps) Rated Capacity (kVA) Shipping Weight (lbs)
ME2-1P2-M Single phase 110-120V Three phase 200-230V 0.2 1/4 1.4 0.53 1.5
ME2-1P5-M 0.4 1/2 2.3 0.88 1.5
ME2-101-M 0.75 1 4.2 1.6 1.5
ME2-2P2-M Single phase 200-240V 0.2 1/4 1.4 0.53 1.6
ME2-2P5-M 0.4 1/2 2.3 0.88 1.7
ME2-201-M 0.75 1 4.2 1.6 1.8
ME2-202-M Single or Three phase 200-240V 1.5 2 7.5 2.9 3.6
ME2-203-M 2.2 3 10.5 4 3.8
ME2-401-M Three phase 380-460V Three phase 380-460V 0.75 1 2.3 1.7 3.5
ME2-402-M 1.5 2 3.8 2.9 3.5
ME2-403-M 2.2 3 5.2 4 3.6

Whether we have Motortronics VFD in stock in Boise, Idaho or need to ship direct from Motortronics to any USA cities; Clearwater Tech can get Phasetronics Micro Inverters to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some Motortronics products enabling us to further assist you in finding the correct ME2 series variable frequency inverters in the USA, Canada, or Mexico. It will be very helpful if you have the ME2 series VFD part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Motortronics variable speed drive that you are looking for in seconds. If you do not have the part numbers for ME2 series AC micro drive, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips

Can't find a part number?
E-mail Us.

Danfoss Drives

The IP20 Series VLT panel optimised drive is designed for easy accessibility and time-saving installation. Mechanical fastening points are easy to access from the front even with automatic tools. All terminals are sufficiently dimensioned and clearly marked. Optimised efficiency and intelligent cooling technology make the compact and service friendly design possible. Even equipment such as EMC filters, harmonics suppression

Datalogic Sensors

Datalogic Automation US50 is the new series of ultrasonic sensors with M50 plastic tubular housing. All models are provided with a radial emitting head. Operating distance from 200mm to 8m makes US 50 ideal solution for all industrial applications where the target must be detected or measured really far away from the sensor. The sensor functions are set using DIP-switches located on the rear side. Electrical connection is