The newly re-designed ASM Series is more accurate and easier to use than previous models. This Self Calibrating Smart-Switch uses the actual load current to set the trip point.
It takes just a couple of seconds of steady running conditions before the sensor locks onto the normal current level.
ASM Series Self-Calibrating Smart-Switch
Upon sensing an average operating current, the ASM self-learns and establishes a limit-alarm trip point based on 85-125% of normal current (overload/underload model only). This sensor eliminates the need to adjust the sensor trip point manually, which means no screwdriver inside an energized control panel. Helps with NFPA70E compliance.
If you are looking for NK Technologies ASM Series Current Switches, please call us on (800) 894 - 0412 or email us at firstname.lastname@example.org we will do our best to help you find the NK ASM-NOU-UL-SP Current Switch that you are looking for at the most competitive prices possible. If you are searching for Neilsen Kuljian ASM-NOU-OU-FT Current Switch technical information (data-sheets) please use the datasheets or product selection guide page links.
- Self-powered and self-calibrating for easy start-up.
- Status monitoring, overload, underload, and operating window (overload and underload) options.
- AC or DC compatibility for use with any automation system.
The ASM Series is designed to detect overload conditions like bad bearings, underload conditions such as drive belt breakage or operating window applications to detect over and under current situations. Use to monitor motors, pumps, fans, heating elements, and conveyers.
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some NK Technologies products enabling us to further assist you in finding the correct ASM-NOU-OU-SP current switch for your application in the USA, Canada and Mexico. Whether we have ASM-NCU-OL-FT current switch in stock in Boise, Idaho or need to ship direct from NK Technologies to any USA cities; Clearwater Tech can get ASM-NCU-OL-SP current switch to you fast and save money! It will be very helpful if you have the ASM-NCU-UL-FT current switch part numbers ready, then our sales representatives can provide you with a pricing and availability quote for ASM-NCU-UL-SP current switch that you are looking for in seconds. If you do not have the part numbers for ASM-NCU-OU-FT current switch, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
Red Lion Counters
As a Counter/Rate Instrument, the rate indicator will utilize the same count signal input as the counter except when in "Separate Input" mode, where the rate channel will use one input and the counter channel the other. As a dual counter instrument, both counters will utilize the signal inputs in the same manner. In other words, in all modes except the "Separate Input" mode, a count pulse applied to the input will affect both
A Unique Microcontroller-Based voltage and current-sensing algorithm constantly monitors the incoming power for fluctuations. When an abnormality, such as a loss of load is detected, the PumpSaver Plus deactivates its output relay directly disconnecting the pump motor. SymCom's Model 231-Insider-P single-phase PumpSaver Plus fits inside 1/3, 1/2, 3/4, and 1hp 230V control boxes and is designed to