Clearwater Tech Logo

NK Technologies

Home   >   Products   >   Neilsen Kuljian   >   Ground Fault Sensors

Neilsen Kuljian

Detecting ground fault conditions and protecting sensitive equipment or personnel from harm are where AG Series sensors can help. A compact design eliminates two-piece solutions while options include factory-set or field-adjustable trip point; N.O. or N.C. latching or auto-reset relays, 24/120/240 V power supply and noise immunity.

NK Technologies AG Series Ground Fault Earth Leakage Sensors Distributors

AG Series

AG Series with Solid-state Outputs offer the benefit of reliable, long-lasting solidstate switches. Sold-state design provides unlimited switch operating life, superior resistance to shock and vibration, zero offstate leakage, high switch speeds and high input-output isolation. Available in solidcore case with screw terminals.

AG Series with Mechanical Outputs are available in solid-core enclosures with a choice between a N.O. or N.C. SPST latching relay and a SPDT Form C relay with auto-reset. All mechanical models can be ordered with factory adjustable setpoint or with a "Tri-set" option, which provides three factory-set, field adjustable setpoints. A noise immunity option is available for applications in harsh EMI/RFI environments.

If you are looking for NK Technologies Ground Fault Sensors, please call us on (800) 894 - 0412 or email us at we will do our best to help you find the NK Earth Leakage Sensor that you are looking for at the most competitive prices possible. If you are searching for Neilsen Kuljian Ground Fault Sensor technical information (data-sheets) please use the datasheets or product selection guide page links.

NK Technologies AGL Series Large Aperture Ground Fault Sensor Distributor

AGL Series

AGL Series, new from NK Technologies, is a large aperture ground fault sensor that offers one of the largest aperture diameters in the industry while maintaining a compact overall profile.

Intended for sensing earth leakage in applications up to 600A, the AGL Series offers a choice of N.O. or N.C. latching relays or an SPDT Form C relay with auto-reset.

Enclosure features integral DIN-rail mounting as standard and optional noise immunity coatings for applications in harsh EMI/RFI environments.

Sense progressive levels of ground fault in motors or heating systems to detect deterioration prior to catastrophic failure. Replace bulky two-piece sensor solutions which require separate CTs or relay modules.

NK Technologies AGT Series Ground Fault Indicators Distributors

AGT Series

AGT Series Ground Fault Protection Sensors combine a current transformer and a True RMS signal conditioner into a single package.

The AGT Series Ground Fault Protection Sensors are designed to produce an analog 4-20 mA signal proportional to earth or ground fault current.

Available in a solid-core case. When connected to a controller or data logger, NEC requirements for alarm can be met. Monitor heating or other loads to detect increasing leakage current.

NK Technologies AGLD Series Ground Fault Relay with Digital Display Distributor

AGLD Series

AGLD series ground fault sensors keep machinery and their operators safe from accidental shocks. The large, one piece solid-core design allows for installation over wires feeding heavy loads. The output relay will change state at any point between 5 and 100 mA, or 80 and 950 mA. A delay can be set to allow down stream protection to activate before this sensor, keeping the main circuit protection hot and the equipment energized while the smaller faults are cleared.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some NK Technologies products enabling us to further assist you in finding the correct AG Series sensor for your application in the USA, Canada and Mexico. Whether we have AGL Series sensor in stock in Boise, Idaho or need to ship direct from NK Technologies to any USA cities; Clearwater Tech can get AGT Series sensor to you fast and save money! It will be very helpful if you have the earth leakage sensor part numbers ready, then our sales representatives can provide you with a pricing and availability quote for AGLD series ground fault relays that you are looking for in seconds. If you do not have the part numbers for AG Series sensor, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check

Part No:

Search Tips
Can't find a part number?
E-mail Us!

Weidmuller Displays

The DIN Standard 1/8 front panel with IP 65 protection ensures reliable operation in wet areas. The connection uses pluggable screw-connection elements. The DI350 models are hazardous area approved cuLus Ex (Class 1 Div. 2, Groups A, B, C & D). The DI350 is a pair of inexpensive 3 1/2 digit displays - one for analogue current (4-20 mA) and the other for voltage (0-10 V) signals, for use in industrial applications.

LEESON Accessories

The SM Series Remote Keypad option allows the SM Series drive to be programmed and controlled from up to 8 feet away. When properly mounted, the remote keypad is rated up to NEMA 4X. In addition to the functions available on the front of the SM drive, the remote keypad has Start/Stop and Forward/Reverse functions. These keypads can only be used with Sub-Micro drives manufactured May, 1999 or later (date code of 9922 or higher).