ATH Series (patented) AC Current Transducers are the latest innovation from NK Technologies. Monitoring the current or power controlled by silicon-controlled rectifiers (SCRs) can be a challenge, especially the current used by heaters. When used to monitor zero-crossing (burst) fired SCRs, the ATH will provide an output signal directly proportional to the RMS amperage.
ATH Series Time Proportioned
Zero-crossing fired controls allow current to flow to the circuit for as short of a time period as one cycle, and off for several cycles. Most current sensors will not work well when there is no current present. This capability is important in case a heating element fails but the process continues operating, which could result in scrapped material.
If you are looking for NK Technologies ATH Series Current Transducers, please call us on (800) 894 - 0412 or email us at email@example.com we will do our best to help you find the NK ATH series current transducer that you are looking for at the most competitive prices possible. If you are searching for Neilsen Kuljian ATH series AC current transducer technical information (data-sheets) please use the datasheets or product selection guide page links.
AC Current Transducer Applications
- Electrical Heaters
- Faster response than temperature sensors.
- Simplest method to monitor pulsed wave forms.
ATH AC current transducers will produce a signal proportional to the current used even when the controller is supplying power in one cycle increments. This is quite common as the "burst-fired" zero crossing witching method produces less harmonic distortion than phase-angle fired controls.
AC Current Transducer Features
- Industry Standard Outputs
- 4-20 mA, 0-5 or 0-10 VDC.
- Compatible with most automation systems.
- External Powered
- Split-core models available powered with 24 VAC or DC.
- Solid-core models powered with 24 VAC or DC or 120 VAC.
- Factory Calibrated - No need for zero and span adjustment potentiometers.
- RMS Output - Accurate measurement of sinusoidal or pulsed current wave shapes.
- Built-in Mounting Feet - Simple, two-screw panel mount or attach with optional DIN rail brackets.
- Designed for UL, CUL and CE Approval - Accepted worldwide
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some NK Technologies products enabling us to further assist you in finding the correct ATH series current transducer for your application in the USA, Canada and Mexico. Whether we have ATH series current transducer in stock in Boise, Idaho or need to ship direct from NK Technologies to any USA cities; Clearwater Tech can get Neilsen Kuljian ATH series current transducer to you fast and save money! It will be very helpful if you have the ATH series AC current transducer part numbers ready, then our sales representatives can provide you with a pricing and availability quote for ATH series current transducer that you are looking for in seconds. If you do not have the part numbers for ATH series AC current transducers, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
The New Large Preset Counter Codix 560 covers a wide range of functions and counting modes: from preset counting up to simple control tasks. With the large preset counters Codix 560 Kubler is rounding off a completely new generation of preset counters. All the areas of application for preset counters including even simple control tasks are now comprehensively covered.
The 20-mm LCD Displays can be read even under poor light conditions. A sheet of perforated self-adhesive labels is included. They include standard engineering units and can be used for all label needs. The electronic subassembly is housed in a rugged, glass reinforced polycarbonate, IP 67 case. This housing is suitable for any industrial environment. Optionally available is a pipe mounting bracket which can be used for