November 09, 2011
SymCom Sensor
The Model LSRX
is an AC current sensor designed to energize the output contact whenever 4.5 Amps or greater is present. The LSRX is used commonly
as an AC current proof relay to indicate if a motor is operating. It can also be used to interlock fans, compressors, and motors;
to indicate equipment status such as feed rates, tool wear, loss of prime on pumps, mixer viscosity, and all types of current
sensing conditions.
|
SSAC Transducer
The DCSA Series
is a loop-powered, linear output current transducer that provides an output that is directly proportional to the RMS AC current
passing through the LCSC10T12 sensor. The DCSA provides either an analog current or voltage: 4 - 20 mA, 1 to 5VDC, or 2 to 10VDC.
Each unit is factory calibrated for monitoring (with the LCSC10T12 connected) in one of four ranges; 0 - 5, 0 - 10, 0 - 20, or
0 - 50A.
|
|
|
|
 |
(800) 894-0412 (208) 368-0415 (Fax)
info@clrwtr.com |
VTR Series |
The 'VTR' Series from NK Technologies is a high-performance True RMS transducer for single- and three-phase
sensing. Applicable on nominal circuits of 120V, 240V and 480V, the VTR provides a fully isolated 4-20mA output proportional to
percent of nominal voltage, even in situations with non-sinusoidal waveforms. A compact enclosure, DIN-Rail compatibility and
snap-fit quick-connect terminal blocks make installation and wiring quick and easy.
Features
- Accurate, True RMS Voltage Measurement
- Slim, DIN-compatible 23mm Wide Enclosure
- Fast Response for Precise Control and Monitoring
- 24 V Loop-Powered; Std. 4-20mA Proportional Output
- CE Approved, UL Recognition Pending
|
|
If you are looking for NK Technologies Voltage Transducers, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com we
will do our best to help you find the NK True RMS Transducers that you are looking for at the most competitive prices possible.
If you are searching for Neilsen Kuljian Voltage Transducer technical information (data-sheets) please use the datasheets or
product selection guide page links.
|
VTD Series |
VTD Series Voltage Transducers are high-performance transducers for sensing voltage in DC powered
installations. Applicable for use on circuits to 600 VDC, VTD voltage transducers provide a fully isolated, 4-20mA output
proportional to rated nominal voltage in DC circuits. Housed in a slim, compact, easy-to-install DIN-rail mount enclosure, the
VTD Series comes in a variety of nominal voltages.
Applications - Voltage Monitoring
- Detect below normal or "brown out" voltage conditions; protect against possible motor overheating.
- Identify conductor loss conditions by detecting voltage reduction in one motor lead.
- Monitor over voltage conditions associated with regenerative voltage to help in diagnosing/avoiding motor drive issues.
- Detect voltage conditions that may cause stress or damage to soft starter components (SCRs).
|
|
Ordering Information
| Model Number |
Description |
| VTD Series |
| VTD1-420-24L-DIN |
15V 4-20 mA 24V external power supply DIN-rail compatible |
| VTD2-420-24L-DIN |
50V 4-20 mA 24V external power supply DIN-rail compatible |
| VTD3-420-24L-DIN |
300V 4-20 mA 24V external power supply DIN-rail compatible |
| VTD4-420-24L-DIN |
600V 4-20 mA 24V external power supply DIN-rail compatible |
| VTR Series |
| VTR1-420-24L-DIN |
120V 4-20 mA 24V Loop powered DIN-rail compatible |
| VTR2-420-24L-DIN |
150V 4-20 mA 24V Loop powered DIN-rail compatible |
| VTR3-420-24L-DIN |
240V 4-20 mA 24V Loop powered DIN-rail compatible |
| VTR4-420-24L-DIN |
480V 4-20 mA 24V Loop powered DIN-rail compatible |
| VTR5-420-24L-DIN |
500V 4-20 mA 24V Loop powered DIN-rail compatible |
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some NK Technologies
products enabling us to further assist you in finding the correct VTD series transducer for your application in the USA, Canada
and Mexico. Whether we have true RMS transducer in stock in Boise, Idaho or need to ship direct from NK Technologies to any USA
cities; Clearwater Tech can get VTR series transducer to you fast and save money! It will be very helpful if you have the VTD DC
transducer part numbers ready, then our sales representatives can provide you with a pricing and availability quote for VTR
transducer that you are looking for in seconds. If you do not have the part numbers for NK voltage transducers, our application
engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
|
|
|
|
 |
|
| Part Number: |
|
|
Can't find a part number?
E-mail Us! |
|
|
