OMRON Industrial Automation
Optical Axis Adjustment in 20 Sec and Ultra-high-power Beam Greatly Reduce Installation and Maintenance Work. The Optimum Aperture Angle and Optical Axis Accuracy Enable Optical Axis Adjustment in 20 Sec Even for Minute 0402-size Workpieces. Installation distance between heads: 50 mm, Installation distance between head and slit: 5 mm, Slit diameter at emitter and receiver: 0.5 mm each (Thickness: 10 mm), and E3NX-FA11 Fiber Amplifier Unit (HS mode).
The optimum aperture angle that obtains a sufficient incident level for stable detection without making precise adjustment combines with high-quality optical axis accuracy with an optical axis inclination variation of ±2.5° or less between individual products to enable optical axis adjustment that is much faster than for previous products. All Fiber Units are inspected with a special jig before they are shipped to enable reliable installation without variations between individual products.
If you are looking for OMRON E32-LT35Z, please call us on (800) 894 - 0412 or email us at firstname.lastname@example.org we will do our best to help you find the OMRON built-in mirror lens fiber units that you are looking for at the most competitive prices possible. If you are searching for OMRON flat model technical information (data-sheets) please use the datasheets or product selection guide page links.
Finding the horizontal head (Fiber Unit) offset in the incident light range for a specific incident level of 1,500 during installation shows just how much wider the range is for the E32-LT35Z in comparison with a previous product (E32-T15ZR). In comparison with the difficult optical axis adjustment of previous products, the optical axis of the E32-LT35Z can be roughly adjusted in a short period of time to obtain the incident level required for stable detection.
The offset between the optical axis and mechanical axis is within ±2.5°, so a sufficient incident level can be achieved merely by aligning the mechanical axis at installation.
A concave mirror lens (patent pending) produces a divergent beam that achieves both easy adjustment and light emission power. An ultra-high-power beam is provided that is approx. five times that of previous products with no lens. A sufficient incident level can be obtained for stable detection even if the optical axis is offset over a long period of usage and even if the emitter/receiver section becomes dirty. You can reduce the maintenance frequency in comparison with previous products.
Digital incident level for the following conditions: Installation distance between heads: 50 mm, Installation distance between head and slit: 5 mm, Slit diameter at emitter and receiver: 0.5 mm each (Thickness: 10 mm), and E3NX-FA11 Fiber Amplifier Unit (HS mode).
OMRON highly recommends these new-standard Fiber Units with a Built-in Lens that provide stable detection with a high-power beam. You don't have to worry about the lens falling off and getting lost.
Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some OMRON fiber products enabling us to further assist you in finding the correct flat model fiber unit in the USA, Canada and Mexico.
Whether we have OMRON E32-LT35Z in stock in Boise, Idaho USA or need to ship direct from OMRON Industrial Automation to any USA cities; Clearwater Tech can get OMRON built in lens fiber unit to you fast and save you some money!
It will be very helpful if you have the fiber optic unit part numbers ready, then our sales representatives can provide you with a pricing and availability quote for OMRON E32-LT35Z that you are looking for in seconds.
If you do not have the part numbers for OMRON fiber units, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
The EX-Z Series sensors features an IP67 protective structure to allow their use in process lines where water is used or splashed. Rust resistant stainless steel sensor mounting brackets and screws are available. A spacer for mounting at the back (1 type) for through-wall sensing and sensor mounting brackets (3 types) are available to meet a diversity of sensor installation needs.
Datalogic S5 series offers a range of plastic tubular M18 photoelectric sensors.The most varied optic functions can be chosen amongst the fixed focus 15 mm and 50 mm or diffuse proximity models with short, medium or long operating distances reaching 60 cm; the 4 m retroreflex, 3 m polarised retroreflex and 1 m for detection of transparent materials; the 12 m through beam and models with fibre-optic connection. Different versions with either axial