Clearwater Tech Logo

Panasonic Electric Works

Home   >   Products   >   Panasonic   >   Collimated   >   Beam Sensors

SUNX Laser Switch

A collimated beam of light is a beam (typically a laser beam) which has a low beam divergence, so that the beam radius does not undergo significant changes within moderate propagation distances. In the simple (and frequently encountered) case of Gaussian beams, this means that the Rayleigh length must be long compared with the envisaged propagation distance.

SUNX HL-T1 Series Laser Collimated Beam Sensors Distributors

HL-T1 Series

The ultra-compact size and yet the high level of performance. These sensors save space. A high resolution of 4 µm 0.157 mil (at an average 64 cycles) allows high-precision positioning and size judgment. Long sensing range of 500 mm 19.685 in [HL-T1005A(F), HL-T1010A(F)] and 2 m 6.562 ft [HL-T1001A(F)] are available.

The sensors are sensitive to minute differences in light intensity, so that they can judge even the opacity of glass. In addition, the amount of light received can be displayed as a percentage to allow you to determine permeation rates.

The laser with a beam diameter of Ø1 mm Ø0.039 in can sense extremely small objects with dimensions in micrometers such as bonding wires.

If you are looking for Panasonic Collimated Beam Sensors, please call us on (844) 331-9378 or email us at we will do our best to help you find the Panasonic HL-T1 series sensor that you are looking for at the most competitive prices possible. If you are searching for Panasonic LA-300 measurement sensor technical information (data-sheets) please use the datasheets or product selection guide page links.

SUNX LA-300 Series LED Collimated Beam Sensor Distributor

LA-300 Series

Since a red LED, harmless to your eyes, has been incorporated as the beam source, you are free from strict laser safety regulations. Moreover, due to the red LED beam source, the measuring spot is visible, which makes positioning of the object simple. Its emitter and receiver are much smaller compared to those of the amplifier built-in type (LA-510). Hence, they can be installed even in a narrow space inside an automatic assembly machine, etc.

For the analog output, in addition to the span adjustment function, a convenient shift function which enables the analog voltage to be shifted by ±0.5 V has been incorporated.

SUNX LA Series Laser Collimated Beam Sensors Distributors

LA Series

This laser collimated beam sensor conforms to the Class 1 laser stipulated in IEC 60825-1 and JIS C 6802. Hence, safety measures such as protective gear are not necessary. Four monitoring LEDs help you to easily align the emitter and the receiver. LA-511 conforms to FDA Class I. It is approved for use in U.S.A. by FDA. The side view attachment (optional) enables versatile mounting styles. A laser beam can harm human being's eyes, skin, etc., because of its high energy density. IEC has classified laser products according to the degree of hazard and the stipulated safety requirements.

SUNX LD Series Laser Type Edge Detection Sensors Distributors

LD Series

The LD series is CE compliant and complies with EMC directives. EN 61000-6-2 is the applicable standard that covers immunities relating to use of this product, but in order to comply with this standard, the following conditions must be satisfied. This controller should be connected less than 10 m 32.808 ft from the power supply. The signal line to connect with this controller should be less than 30 m 98.425 ft.

A red semiconductor laser is used as the emitting device and CCD is used as the receiving device. An ideally parallel optical beam is emitted enabling high accuracy measurement.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some Panasonic laser sensor products enabling us to further assist you in finding the correct SUNX LA sensor in the USA, Canada and Mexico. Whether we have Panasonic LD series laser edge detection sensors in stock in Boise, Idaho USA or need to get them from Panasonic Electric Works Corporation of America; Clearwater Tech can get SUNX HL-T1 ultra-compact sensors to you fast and save you some money! It will be very helpful if you have the Panasonic LA-300 LED sensor part numbers ready, then our sales representatives can provide you with a pricing and availability quote for LA series laser sensor that you are looking for in seconds. If you do not have the part numbers for LD series laser type sensors, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check

Part No:

Search Tips
Can't find a part number?
E-mail Us!

Datalogic Sensors

Shielded Models can be installed with their sensing faces flush to the metal. The distance from opposing metal surfaces must be ≥ 3sn and the distance between two proximity switches (side-byside) ≥ 2D. Unshielded models can be identified by their 'caps', since they have no metal housing surrounding the area of the sensing face. The sensing face must extend ≥ 2sn from the metallic installation medium.

Contrinex Sensors

The Photoelectric Frame Sensors are available in various sizes, and consequently suitable for a large range of applications. They work according to the principle of through-beam sensors. A considerable number of emitters and receivers respectively are located on opposite sides of the frame, so as to cover the whole passage with a light curtain. The devices are used for the detection of small free-moving parts,