Clearwater Tech Logo

Panasonic Electric Works

Home   >   Products   >   Panasonic   >   EX-L200   >   Laser Sensors

SUNX Laser Switch

Due to the customized IC and optical design, high precision detection is fulfilled with directivity and visibility achievable only by laser. The laser adopted is Class 1 (IEC / JIS / FDA) laser that is safe to use, so that there is no need to separate the areas of sensor usage. Visual positioning is easy due to silhouetting a sensing object against a receiver. EX-L200 series has the same mounting pitch as ultra-compact photoelectric sensor EX-20 series so that the time taken in designing is saved.

SUNX EX-L200 Series Amplifier Built-in Ultra-Compact Laser Sensors Distributors

EX-L200 Series

Instruction Manual

MS-EXL2-6 Instructions

The ø0.5 mm ø0.020 in light receiving slit cuts out any unnecessary beam. As only the beam which enters into the slit becomes valid, an accurate and precise detection is possible. This is effective for minute object detection or small difference in level detection. Also, the aspheric surface adopts a glass module lens to deliver a high quality spot beam.

A repeatability of 0.02 mm 0.0008 in or less at a range of from 100 mm to 200 mm 3.937 to 7.874 in makes this type best suitable for positioning applications. Moreover, it boasts a top-class detection precision in the compact laser sensor category with its min. sensing object being ø0.01 mm ø0.0004 in. The same aspheric surface glass lens used in the thru-beam type is adopted to minimize aberration and deliver a high quality beam spot.

If you are looking for Panasonic EX-L200 Series Sensors, please call us on (844) 331-9378 or email us at we will do our best to help you find the Panasonic EX-L211 thru-beam sensor that you are looking for at the most competitive prices possible. If you are searching for Panasonic EX-L212-P throughbeam sensor technical information (data-sheets) please use the datasheets or product selection guide page links.

Visually confirm the optimal receiver position, adjusting the beam axis by aligning the objects while watching the red spot on the beam alignment screen. The diagram on the right shows an example with the lead of a mechanical pencil being detected through visual adjustment.

The sensor can be used even in environment where water or dust present because of its protection structure IP67.

The mounting holes have metal sleeves inserted to prevent damage to the sensor due to over tightening of the screws. It is possible to tighten securely with M3 screws. (Tightening torque: 0.5 N.m)

The lead wire conductor's thickness is increased to 0.15 mm2 from 0.1 mm2 of the conventional ultra-compact photoelectric sensor. This makes it easier to perform crimpling work on the cables for better workability. In addition, the tensile strength of the crimpling area has become stronger.

A sensitivity adjuster of world smallest size is incorporated to offer strong performance in minute detection or high precision detection.

The output operation switching input enables the switching of Light-ON or Dark-ON in one unit. This prevents ordering mistake and reduces the maintenance of spare parts.

The laser light source contributes to low current consumption, as it is approx. 5mA lower than a LED light source.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some Panasonic EX-L291 retroreflective sensor products enabling us to further assist you in finding the correct SUNX EX-L221-P spot reflective sensor in the USA, Canada and Mexico. Whether we have Panasonic EX-L261 convergent reflective sensors in stock in Boise, Idaho USA or need to get them from Panasonic Electric Works Corporation of America; Clearwater Tech can get SUNX EX-L262-P sensors to you fast and save you some money! It will be very helpful if you have the Panasonic EX-L262 sensor part numbers ready, then our sales representatives can provide you with a pricing and availability quote for EX-L261-P sensor that you are looking for in seconds. If you do not have the part numbers for EX-L221 laser sensors, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check

Part No:

Search Tips
Can't find a part number?
E-mail Us!

Red Lion Controller

The Model CSDIO series modules are digital I/O modules designed for use with the Modular Controller Series. The CSDIO14 offers eight inputs and six outputs that can be used to monitor contact or sensor inputs and actuate relays, solenoids, PLC inputs, etc. The inputs accept standard DC inputs or contact closures, and are configured for Sink/ Source signals via external switches. Additionally, each input has a switch selectable input

Leuze Sensors

Energetic Retro-Reflective photoelectric sensor with visible red light in cylindrical M12 design for detection of fast events. The extremely compact M12 design of the 412 series opens many interesting applications, e.g., in assembly and handling technology or packaging technology. Short and compact throughbeam photoelectric sensors with visible red light. Throughbeam photoelectric sensors with visible red light in cylindrical M12 design.