Panasonic Electric Works
The unique effect of capillarity enables reliable detection of small leaks and viscous liquids. This slim (10 mm 0.394 in) side-mounting sensor is especially good for use in confined spaces. No need for sensitivity adjustment with adjuster, so initial mounting is easy. Space savings are significant, as the ultra-thin & compact EX-FC1 has main unit body dimensions of only W20 × H80 × D52 mm W0.787 × H3.150 × D2.047 in.
This sensor is equipped with a NORMAL indicator (green) which lights up when mounting correctly, and a FAULT indicator (red) which lights up when sensing the leaked liquid or when mounted incorrectly (forgetting to mount exclusive mounting bracket). So, the operation can be checked easily.
If the sensor is not mounted correctly, if the cable is broken or disconnected, or if the sensor is not operating correctly, the output is the same as when the beam is not received (LEAK). Design deals with human errors such as, forgetting to mount, etc.
If you are looking for Panasonic EX-F70/EX-F60 Liquid Leak Detection Sensors, please call us on (844) 331-9378 or email us at firstname.lastname@example.org we will do our best to help you find the Panasonic EX-F71 general purpose sensor that you are looking for at the most competitive prices possible. If you are searching for Panasonic EX-F61 chemical resistant sensor technical information (data-sheets) please use the datasheets or product selection guide page links.
Facilitates easy installation: the SUS mounting bracket type can be installed using only a single screw and the PVC mounting bracket type can be installed using only two screws or an adhesive. No component replacement required for resetting after leak detection. The simple shape makes it easy to wipe off the leaked liquid.
A mounting bracket made of PVC (polyvinyl chloride) is available. This mounting bracket can be used normally in environments that would corrode normal metal brackets.
The sensor enclosure and the cable sheath are made from PFA which is highly resistant to chemicals. Accurate sensing is achieved even if there are leaks of chemicals such as sulfuric acid, hydrochloric acid or ammonia.
Even with its built-in amplifier, the size is compact at W26 × H19 × D9 mm W1.024 × H0.748 × D0.354 in, so that it can be used even in narrow spaces.
The simplified shape makes it easy to clean up after liquid leaks, simply by wiping off the liquid, and no parts need to be replaced.
EX-FC1 is a simple wire-saving unit for exclusive use with EX-F71/F72, EX-F61/F62 leak detection sensors. (It can be used with general sensors as well.) EX-FC1 integrates the outputs from up to 8 leak detection sensors into a single OR output, so significant wiring and space savings are achieved. Even with only one leak detection sensor connected, an OFF signal is output if the sensor detects liquid leakage, or if the unit has been installed incorrectly.
Connections are made by simply inserting the leak detection sensor cable leads into the snap male connector SL-CP1, then push until the connector snap-locks! This saves the time and the trouble of stripping the insulation from each lead before attaching to terminals.
Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some Panasonic photoelectric sensor products enabling us to further assist you in finding the correct SUNX EX-F71-PN sensor in the USA, Canada and Mexico. Whether we have Panasonic EX-F72 sensors in stock in Boise, Idaho USA or need to get them from Panasonic Electric Works Corporation of America; Clearwater Tech can get SUNX EX-F72-PN sensors to you fast and save you some money! It will be very helpful if you have the Panasonic EX-F61-PN sensor part numbers ready, then our sales representatives can provide you with a pricing and availability quote for EX-F62 sensor that you are looking for in seconds. If you do not have the part numbers for EX-F62-PN sensors, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
Red Lion Modules
Ethernet Communications can be established at either 10 BASE-T or 100 BASE-TX. The CS Master's RJ45 jack is wired as a NIC (Network Interface Card). For example, when wiring to a hub or switch use a straight-through cable, but when connecting to another NIC use a crossover cable. The Crimson manual contains additional information on Ethernet communications. Advanced data acquisition and management is easy with Red Lion's powerful, affordable Modular Controller.
Marathon Power Blocks
Recognized power blocks comply to UL 1059 and CSA C22.2 No. 158. All of our power blocks meet the 600V spacing requirements for application classes B & C and some Class A (135s). Listed power blocks comply to UL 1953. These are all rated 600V and are intended to be used on the load side of service equipment in accordance with the National Electrical Code, NFPA 70. These blocks are used for splicing conductors in metallic wireways,