Panasonic Electric Works

Home   >   Products   >   Panasonic

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

The FP-X Panasonic PLC offers a set of features and functions that rivals all the competition. With processor speeds of 0.32 usec and 32K of program memory, the FP-X is suitable to replace both small and expensive high speed PLCs. The FP-X comes with built-in 24V sensor power supply, removable Terminal Strips and relay outputs. The FP-X is directly powered by AC input. The expandability is endless. There are communication, analog, discrete I/O, and motion expansions. The FP-X Panasonic PLCs can also use all the expansions available in the FP0 series PLC.

If you are looking for Matsushita Panasonic Electric Works products, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Panasonic PLCs that you are looking for at the lowest prices possible. If you are searching for Panasonic Servo Driver technical information (data-sheets) please use the Panasonic Datasheets OR Product Selection Guide page links.

The new A4 Servo is the next generation of Panasonic's Minas product line. It sports a fast frequency response of 1KHz, improved real time auto gain tuning, new vibration control features, and 2Mpps command input. The size has also been reduced up to 30% compared to Matsushita Panasonic Electric Work's older A-Series, and along with the UL and CE certifications, the A4 Series servo drive & motor is also in compliance with SEMI F47 Standard.

Due to vector control, Panasonic VF-CE inverter achieves considerably higher torque in comparison to conventional V/f control (maximum torque = 1.8 x MN for 60s) and has low level open-circuit power consumption. This function is particularly useful for drives with strong fluctuating loads or high starting inertia, as well as for sensorless speed control of motors requiring slip compensation. Panasonic VF-CE inverters offer a new concept for preventing electrical interference.

Panasonic Electric Works established a new world standard "SLIM" PLC. Starting from 10 I/O to 32 I/O, the CPU is only 25(w) x 90(h) x 70(d)mm. This is about 1/4 the size of the traditional bulky PLC style called "Brick". The FP0 Panasonic PLC saves precious panel space and money. Relay output types have removable screw terminal blocks. The power supply connector is also quick to disconnect. Easy installation especially when duplicating many systems.

Panasonic offers a broad line of compact NAiS limit switches from heavy-duty foundry types to light-duty snap switches. Rugged designs are vibration and shock resistant, and environmentally sealed for indoor, outdoor, and washdown service. These limit switches are available with a wide variety of lever and plunger actuators. Several models carry the CE mark in addition to UL/CSA/TUV, and feature international mounting dimensions. Many models include an integral LED lamp to indicate the operating status of the switch, and some are pre-cabled.

Panasonic GT-32 operator interface raises the bar for what slim and compact screens can offer. The GT-32 HMI is very bright, using a 4096 color QVGA TFT display (GT32T) and has an amazingly wide viewing angle. More than 120 degrees! This makes it very easy to operate your machine and increase productivity. The GT-32 has one of the smallest frames in the market. While a lot of other 6" touch screens have big cases, we try to help you save panel space. The thin bezel and shallow case make the GT-32 one of the smallest touch screens in the industry.

Panasonic Electric Works Corporation of America offers a broad line of highly flexible controllers for use as temperature controllers with PID (built-in auto-tuning function included), analog signal conditioners with scaling and panel meters with a very bright & easy to read display. The KT line of controllers is well suited for a wide variety of machine and process control applications. Each controller offers a wide selection of inputs and outputs.

Panasonic LT4H is a digital timer made to meet the market's needs. This top of the line multi-function, multi-range timer has 8 selectable operating modes. Available with pin or screw terminals, it has a 2-color backlit LCD display, waterproof front panel, four signal inputs, and relay or solid-state outputs.

Panasonic LC4H is an electronic counter that's ahead of its time! This top of the line multi-function, counter has 140 combined operating configurations and standard or high-speed count modes. Available with pin or screw terminals, it has a 2-color backlit LCD display, waterproof front panel, four signal inputs, and relay or solid-state outputs.

Panasonic offers a versatile line of counters and hour meters to meet just about any application need. Panel mount or PC board mounting are available. These products are of the highest quality and offer our customers an outstanding value. NAiS LH2H compact LCD hour meter features a big, 7 digit display, a ten year lithium battery built-in (replaceable), and conforms to IP 66 environmental durability.

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

The CX-400 series of Panasonic (SUNX Brand) photoelectric sensors is a wide-ranging lineup of 116 different models. Built to IP-67 standards, the CX-400 series is designed for the most demanding environments. There are also models that are specifically designed for resistance to oil, coolant, or ethanol. The CX-400 series is compact in size (W11.2mm x H31.0mm x D20.0mm) with a world standard mounting pitch of 25.4mm. Wiring options include a M8 quick disconnect, M12 quick disconnect, or built-in wire type with a length of 0.5mm, 2m, or 5m.

Our industrial automation supply distributors warehouse in Boise, Idaho USA stocks some Panasonic Electric Works products enabling us to further assist you in finding the correct servos for your application in the USA. Whether we have limit switches in stock in Boise, Idaho USA or need to ship direct from Panasonic Electric Works to any USA cities; Clearwater Tech can get programmable logic controllers to you fast and save you some money! It will be very helpful if you have the temperature controller part numbers ready, then our sales representatives can provide you with a pricing and availability quote for counters that you are looking for in seconds. If you do not have the part numbers for hour meters, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.