In combination with I/O sockets and the plug-in jumpers, the IRC relay series permits low-cost, clearly arranged and reliable realisation of interface circuits for the input and output ends of PLC and control systems. S10-M and S12 sockets with one and two contacts, with inputs in series and identical arrangement of the contacts. Identical order of coil and contacts on both sockets.
IRC Interface Applications
V40 bridges join four similar points in four aside adjacent sockets. They can join up either among themselves or to V10 units, to bridge an unlimited number of sockets S10-M and S12 in any combination.
V10 bridges are units to connect a single socket to the next one, so you bridge less or more than 4 sockets. Made of copper with a current capacity of 40 A.
B20 bridges points A2, internally connected, of every aside adjacent socket S10-M or S12. Each element connects point 6 of the first socket to point 5 of the next one, always leaving free the point 5 of the first socket and the point 6 of the last one, to connect the common polarity cable.
All plug-in jumpers are insulated. The plug-in jumpers at the drive end (coil) can be split manually to the required length, thus enabling the creation of any required interface groups.
If you are looking for RELECO IRC Series Relay Interface Applications, please call us on (800) 894 - 0412 or email us at firstname.lastname@example.org we will do our best to help you find the Comat C10-A10 relay that you are looking for at competitive prices. If you are searching for TURCK C10-A10X relay technical information (data-sheets) please use the datasheets or product selection guide page links.
Colours used by RELECO in the relays' test buttons:
- Blue for DC circuits
- Red for AC circuits
The S10-M and S12 sockets and the new connection jumpers B20, V10 and V40 enable easy and fast wiring of rows of relays. The jumpers can be used in a mixed configuration of S10-M and S12 sockets. Different jumper colours allow clear identification. This results in fewer errors, lower assembly costs and easier inspection and maintenance work. Available in grey (standard), red (AC) and blue (DC), in conformity with the colour coding used by RELECO for test buttons for relay identification. Attention needs to be paid only to the total current. At higher currents and also for safety reasons, a current supply at the start and end of a jumpered connection is recommended.
Contacts can be linked to the power ends with the aid of these jumpers. Normally, these are the changeover contacts, terminal 11 or 21. The jumpers can also be used to jumper NC or NO plug-in terminals. V40 jumpers link four identical contacts of four neighbouring sockets. They can either be linked to one another or to V10 jumpers to jumper a number of sockets in any combination. V10 jumpers can be used to link individual sockets to one another in groups. A combination of V40 and V10 jumpers is possible, depending on the number of sockets.
The sockets S10-M and S12 are accessible via the plug-in terminals 5 and 6 for A2 (internal connection). Each element links terminal 6 of the first socket to 5 of the next socket, and 5 of the first socket and 6 of the last socket are always left free to connect the cable. The jumper B20 consists of four coherent parts, which can be separated, however.
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some TURCK products enabling us to further assist you in finding the correct RELECO C10-A10R relays for your application in the USA. Whether we have TURCK C10-A10FX relays in stock in Boise, Idaho or need to ship direct from TURCK to any USA cities; Clearwater Tech can get RELECO C10-A10BX relays to you fast and save money! It will be very helpful if you have the TURCK C10-A18 relay part numbers ready, then our sales representatives can provide you with a pricing and availability quote for RELECO C10-A18 relay that you are looking for in seconds. If you do not have the part numbers for TURCK C10-A15X relays, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
IDEC IZUMI's SignaLight light towers offer a cost competive solution to your light tower demands. Available from 1 to 5 tiers with either LED or incandescent lamps, they feature easy-to-replace lamps and a unique, built-in, rubber vibration damper. Models are available with a steady (non-flashing) function or with a built-in flashing circuit that allows any combination of flashing and non-flashing tiers. Ideal for such
The Coupling Unit CM-IVN is designed to extend the nominal voltage range of the insulation monitoring relay CM-IWN.1 up to 690 V AC and 1000 V DC. The coupling unit can be connected to the system to be monitored by means of the terminals VL+ and VL-. The terminal Vw has to be connected to the earth potential. The terminals L+, V1+, L-, V1-, VS and VE have to be connected to the CM-IWN.1 as shown in the connection diagrams below.