 |
(800) 894-0412 (208) 368-0415 (Fax)
info@clrwtr.com |
CSMSTRSX, CSMSTRGT, & CSMSTRLE Model |
Red Lion Enhanced Modular Controller Master
- Provides Enhanced Features for Data Acquisition or Multi-zone PID Control Applications
- Webserver Provides Worldwide Access to Data Logs and Virtual HMI (SX & GT)
- Virtual HMI Offers Built-in PC-based SCADA Functionality (SX & GT)
- Performs Hierarchical Control of Other Modules in the Modular Controller Series
- Stores Module Configuration Information and Automatically Reprograms Replaced Modules
- Extensive Built-in Driver List Allows Easy Data Mapping to PLCs, PCs, and SCADA Systems
- Independent Serial Ports Provide Virtually Unlimited Integration Methods
- 10 Base-T/100 Base-TX Ethernet Connection Provides Networking Capability
- Supports up to 16 Modular Controller Series Modules
- CompactFlash Slot Allows Process Data to be Logged Directly to CSV Files (SX & GT)
|
|
If you are looking for Red Lion Modular Controller Master, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com
we will do our best to help you find the Red Lion Digital I/O Modules that you are looking for at the most competitive prices
possible. If you are searching for Red Lion Strain Gage Modules technical information (data-sheets) please use the datasheets or
product selection guide page links.
|
CSMSTRV2 Model |
Red Lion Modular Controller Series Master
- Performs Hierarchical Control of other Modules in the Modular Controller Series
- Provides Power and Communications to Modules through Backplane Connector
- Stores Module Configuration Information, and Automatically Reprograms Replaced Modules
- Extensive Built-in Driver List Allows Easy Data Mapping to PLCs, PCs, and SCADA Systems
- Independent Serial Ports Provide Virtually Unlimited Integration Methods
- 10 BASE-T/100 BASE-TX Ethernet Connection Provides Networking Capability
- Supports up to 16 Modular Controller Series Modules
- Supported By Crimson 2.0 Software (Older Crimson 1.0 Files May Be Imported Into Crimson 2.0)
|
CSOUT Model |
Red Lion Model CSOUT Analog Output Modules
- High Density Analog Output Module for the Modular Controller Series
- Available Outputs include 0 to 5 VDC, 0 to 10 VDC, ±10 VDC, and 0/4-20 mA DC
- Outputs are Isolated from each other and from the Backplane
- Outputs are Software Configured and Fully Scalable
- Auto Addressing Minimizes Configuration Time
- Can Be Used in Conjunction with any CS Series Modules
|
CSPID Model |
Red Lion CSPID Single & Dual PID Modules
- Dedicated single and dual PID modules for the Modular Controller series
- Hot-swappable replacement reduces downtime
- Auto addressing minimizes configuration time
- Fully isolated design provides reliable operation
- Pid control with reduced overshoot
- Universal inputs accept tc, rtd, 0-10 v and 0/4-20 mA signals
- On demand auto-tuning of PID settings
- DC analog output (optional, CSPID1 only)
- Heater current input (optional) ensures detection of heater circuit failure
- Windows configuration software
|
CSDIO Model |
Red Lion Digital I/O Module with Logic Engine
- Adds remote I/O capability to the Modular Controller series
- Eight input, six output digital module
- Inputs isolated from outputs
- Inputs independently switch selectable for sink or source signals
- Inputs independently configurable for high or low active state
- Inputs independently switch selectable for high or low frequency signals
- Relay or NFET output models available
|
CSINI8 & CSINV8 Model |
Red Lion Analog Input Modules
- Dedicated high density input modules for the Modular Controller series
- Models available to accept ±10V and 0/4-20 mA inputs with per channel input options
- ±10V and 0/4-20 mA input versions available with 100 point linearization
- Unused inputs can be disabled to increase overall reading rate
- Ideal for data-acquisition applications
- Auto addressing minimizes configuration time
- Can be used in conjunction with any CS series modules
|
CSSG Model |
Red Lion Strain Gage Modules
- Strain Gage Module for the Modular Controller Series
- Hot-swappable Replacement Reduces Downtime
- Auto Addressing Minimizes Configuration Time
- PID Control with Reduced Overshoot
- Load Cell, Pressure and Torque Bridge Inputs
- Software Selectable Low Level Inputs
- (20 mV, 33 mV or 200 mV Full Scale) Software Selectable 5 VDC or 10 VDC Bridge Excitation
- Digital Tare (re-zero), Batch Totalizer, and Peak/Valley (max/min) Recording
- On Demand Auto-tuning of PID Settings
- DC Analog Output
- Windows Configuration Software
|
CSTC8 & CSRTD6 Model |
Red Lion Temperature Input Modules
- Dedicated high density temperature input modules for the Modular Controller series
- Models available for thermocouple or RTD inputs
- Thermocouple input version provides independent type selection for each input
- Unused inputs can be disabled to increase overall reading rate
- Ideal for data-acquisition applications
- Auto addressing minimizes configuration time
- Can be used in conjunction with any CS series modules
|
|
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Redlion Controls
products enabling us to further assist you in finding the correct model CSMSTRSX, CSMSTRGT & CSMSTRLE for your application in
the USA, Canada & Mexico. Whether we have model CSMSTRV2 in stock in Boise, Idaho or need to ship direct from Red Lion
Controls to any USA cities; Clearwater Tech can get model CSOUT to you fast and save some money! It will be very helpful if you
have the model CSPID part numbers ready, then our sales representatives can provide you with a pricing and availability quote for
model CSDIO that you are looking for in seconds. If you do not have the part numbers for model CSINI8 & CSINV8, our
application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
|
