Red Lion Controls PID Modular Controller Master PID Analog Thermocouple Temperature Controllers Distributors

Red Lion Controls manufactures a broad line of PID controllers, signal conditioners, Temperature Conrollers, and data-acquisition devices for the process control market. Redlion Controls' microprocessor-based designs allow flexibility and provide accuracy for the toughest of applications. Always striving to make integration easier, Red Lion Controls also offer PID and data acquisition platforms with direct PLC communications and fieldbus connectivity.

Red Lion Controls' Modular Controller series offers a cost effective solution to integrating multi-zone PID control, data acquisition and I/O into your PC, DCS or PLC control system. You can drag and drop controller data to PLC registers in seconds using point-and-click data mapping from an extensive menu of built-in serial and Ethernet drivers. No tedious PLC code to write. Red Lion offers a wide variety of 1/16 DIN and 1/8 DIN controllers, as well as DIN rail mounted models.

If you are looking for Red Lion Modular Controllers, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Red Lion Temperature Controllers that you are looking for at the lowest prices possible. If you are searching for Red Lion PID Modular Controllers technical information (data-sheets) please use the Red Lion Data Sheets page link.

All devices provide auto-tune for easy setup and an advanced control algorithm to limit overshoot. For simple multi-zone applications, our rail mounted Dual Loop Controller is designed to interface via Modbus, DH-485 or DeviceNet, allowing easy connection to your control system. The T48 Red Lion Temperature Controllers accept signals from a variety of Temperature Sensors (thermocouple or RTD elements), while the P48 Controller accepts either a 0 to 10VDCor 0/4 to 20mADC input signal. Both controllers precisely display the process, and provide an accurate output control signal (time proportional or linear DC) to maintain a process at the desired control point. The Red Lion Controls controllers' comprehensive programming allows them to meet a wide variety of application requirements.

The Red Lion temperature controllers can operate in the PID control mode for both heating and cooling, with on-demand Auto-Tune, which will establish the tuning constants. The PID tuning constants may be fine-tuned by the operator at any time and then locked out from further modification. The Red Lion Control temperature controller employs a unique overshoot suppression feature, which allows the quickest response without excessive overshoot. Operation of the controller can be transferred to manual mode, providing the operator with direct control of the output.

The Red Lion Controls temperature controller may also be programmed to operate in the ON/OFF control mode with adjustable hysteresis. Dual 4-digit displays allow viewing of the process/temperature and setpoint simultaneously. Front panel indicators inform the operator of the Red Lion temperature controller and output status. The control output and the alarm outputs are field replaceable on select models. The T48 Red Lion temperature controllers' optional Heater Current Monitor provides a direct readout of process heater current. An alarm can be programmed to signal when the heater has failed. This provides early warning of system failure before product quality is affected.

The Model T16 Red Lion Temperature Controller accepts signals from a variety of temperature sensors (thermocouple or RTD), while the Model P16 Controller accepts either a 0 to 10 VDC or 0/4 to 20 mA DC input signal. Both Red Lion temperature controllers can provide an accurate output control signal (time proportional or DC Analog Output) to maintain a process at a setpoint value. Dual 4-digit displays allow viewing of the process/temperature and setpoint simultaneously. Front panel indicators inform the operator of the controller and output status. The comprehensive programming allows these temperature controllers to meet a wide variety of application requirements.

The Red Lion Controls Model CSMSTRSX is a communications and control platform designed for use with Modular Controller Series slave modules. The CSMSTRSX Red Lion Modular Controller Master uses a proprietary high speed serial protocol to communicate, via backplane connection, with up to 16 slave modules. Through the same connection, the Master also provides power to the modules. When powered up, the CSMSTRSX Red Lion Modular Controller automatically identifies and addresses connected slave modules.

By storing the configuration information of all of the modules, the CSMSTRSX Red Lion Modular Controller panel is able to automatically configure modules if they are replaced. The TLA is a Factory Mutual approved temperature limit alarm, intended to provide an independent shutdown for thermal processes. The Red Lion Controls TLA accepts signals from a variety of temperature sensors (thermocouple or RTD elements), and its comprehensive programming allows it to meet a wide variety of application requirements. Dual 4-digit displays allow viewing of the process temperature and limit setpoint simultaneously. Front panel indicators inform the operator of the process and output status. The main limit output and alarm outputs are field replaceable.

Our PID Modular Controller distributors warehouse in Boise, Idaho USA stocks some Red Lion Controls Products (Red Lion PID Controllers Miniature Thermocouple RTD Indicators Process Limit Alarm Red Lion Temperature Controllers Distributors) enabling us to further assist you in finding the correct Redlion Modular Controllers in the USA (Alabama Alaska Arizona Arkansas California Colorado Connecticut Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Misouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington Washington D.C. West Virginia Wisconsin Wyoming).

Whether we have Red Lion Modular Controllers in stock in Boise, Idaho USA or need to ship direct from Red Lion Controls to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Fransisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portand Oklahoma City Tucson New Orleans Las Vegas Cleaveland Long Beach Alburquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Whichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmand Yonkers Spokane Augusta Rhichmand Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); www.clrwtr.com can get Red Lion PID Modular Controllers to you fast and save you some money!

It will be very helpful if you have the Red Lion Temperature Controllers part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Red Lion PID Modular Controllers that you are looking for in seconds. If you do not have the part numbers for RedLion Controls Modular Controllers, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.