Clearwater Tech Logo
Loading
Home | Contact Us
(844) 331-9379

Red Lion Controls

Home   >   Products   >   Redlion   >   Accessories   >   Current   >   Transducers

Red Lion Controls

(844) 331-9379       (888) 723-4773 (Fax)
info@clrwtr.com

True RMS AC Current Transducer

CTR Series transducers combine a current transformer and a signal conditioner into a single package. This provides higher accuracy, lower wiring costs, easier installation and saves valuable panel space. The CTR Series transducers are available in 4-20 mA output only. The CTR Series provides a "True RMS" output on distorted waveforms found on VFD or SCR outputs, and on linear loads in "noisy" power environments.

  • True RMS AC Current Transducer
  • Jumper Selectable Ranges
  • Output is Magnetically Isolated from the Input
  • Split-core Case
Red Lion Model CTR True RMS AC Current Transducers Distributors
True RMS AC Current Transducer

If you are looking for Red Lion Current Transducers, please call us on (844) 331-9379 or email us at info@clrwtr.com we will do our best to help you find the Red Lion Current Transformers that you are looking for at the most competitive prices possible. If you are searching for Red Lion Current Operated Switches technical information (data-sheets) please use the datasheets or product selection guide page links.

Average Responding AC Current Transducer

CTL Series transducers combine a current transformer and a signal conditioner into a single package. This provides higher accuracy, lower wiring costs, easier installation and saves valuable panel space.

  • AC Current Transducers
  • Average Responding Output: 0-10 VDC or 4-20 mA
  • Jumper Selectable Ranges
  • Output is Magnetically Isolated from the Input
  • Split-core and Fixed-core Cases
Red Lion Model CTL Average Responding AC Current Transducers Distributor
Average Responding AC Current Transducer

DC Current Transducer

CTD transducer combines a Hall Effect sensor and a signal conditioner into a single package. This provides higher accuracy, lower wiring costs, easier installation and saves valuable panel space.

  • DC Current Transducer
  • Three Jumper Selectable Input Ranges
  • Output is Magnetically Isolated from the Input
  • Internal Power Regulation
  • Split-core Case for Easy Installation
Red Lion Model CTD DC Current Transducers Distributors
DC Current Transducer

AC Current Operated Switch

CTS Series Transducers are self-powered, solid-state current-operated switches that trigger when the current level sensed through the aperature exceeds the adjusted setpoint. The solid state output contacts can switch AC or DC; this "universal" output makes them well suited for application in automation systems.

  • AC Current Operated Switch
  • Universal Output
  • Self-powered
  • Easily Adjustable Setpoint
  • Fixed or Split-core Case
Red Lion Model CTS AC Current Operated Switches Distributor
AC Current Operated Switch

Current Transformer

The listed current ratio of the current transformer is based on the primary conductor passing once through the transformer opening. The ratio is reduced in multiples by looping the conductor through the opening.

  • Measures heater current up to 50 amps
  • 100 mA AC output for temperature controllers
  • Operating Frequency: 50 to 400 Hz
  • Insulation Class: 0.6 KV BIL 10 KV full wave
  • Terminals: Brass studs No. 8-32 UNC with flat washer and hex nuts
  • Window Diameter: 1.13" (28.7 mm)
  • Weight: 8.0 oz (226.0 g)
Red Lion Model CT Current Transformers Distributors
Current Transformer

Current Transformer

The CT004 is intended for use with temperature controllers for monitoring heater current. The CT004 is suitable for general purpose AC current monitoring applications up to 40 Amps.

  • Measures heater current up to 40 amps
  • 100 mA AC output for temperature controllers
  • Small footprint
  • Current ratio: 40:0.1A
  • Max heater current: 50 A
  • Terminals: Solder type
Red Lion Model CT004 Current Transformers Distributor
Current Transformer

DC Current Shunt

The APSCM current shunts accept signals over 2 Amp VDC and convert the output to a millivolt signal compatible with most standard DC meters. Two models are available; a 0 to 10 Amp and a 0 to 100 Amp version. Both models provide a 100 mVDC output proportional to the DC current input.

  • 10 and 100 AMP DC Current Shunts
  • Converts DC Current to DC Millivolts
  • Provides a 0 to 100 Millivolt Output
Red Lion Model APSCM DC Current Shunts Distributors
DC Current Shunt

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Red Lion Controls products enabling us to further assist you in finding the correct CT004 series transformer for your application in the USA, Canada & Mexico. Whether we have Red Lion model CTD in stock in Boise, Idaho or need to ship direct from Red Lion Controls to any USA cities; Clearwater Tech can get CTL transducer to you fast and save some money! It will be very helpful if you have the Red Lion current operated switch part numbers ready, then our sales representatives can provide you with a pricing and availability quote for APSCM DC shunts that you are looking for in seconds. If you do not have the part numbers for CT transformer, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us.

NK Current Switches

The AS1 Series current sensing switches combine a current transformer, signal conditioner and limit alarm into a single package for use in status monitoring or proof of operation applications. Offering an extended set point range of 1-150A and universal, solid state outputs, the self-powered AS1 current sensing switches can be tailored to provide accurate and dependable digital indication of over-current conditions.

Panasonic PLC

Panasonic NAiS FP-e is the industry's first panel mount PLC from the makers of the first SLIM FP0 PLC, Panasonic Electric Works. This small (DIN 1/16 case) PLC has a built-in bright 3 color LED panel capable of displaying up to 5 digits along with predefined units. The function keys on the front panel can be used for setting timers, counters, temperature set points, internal bits, regular data points, and can also be used as 16 additional input switches.