December 12, 2011
Weidmuller Converters
A/D Converters
convert analogue signals into digital signals. They are used for converting standardised analogue current and voltage signals
into 8-bit digital signals. Thus they are particularly well suited for process monitoring tasks. When used for industrial
monitoring applications, sensors can record surrounding environmental conditions. Sensor signals are used within the process to
continually track
|
TURCK Monitors
The MK26-22-R
is a rotational speed monitor designed to compare pulse sequences from two rotating parts on motors, gears, turbines, etc. and to
monitor these sequences for slip/synchronous operation. This makes the device especially suited for belt-drive and conveyor-belt
monitoring. The MK26-22-R uses NAMUR switches on the input circuits. To monitor slip, i.e. the difference between two rotational
speeds,
|
|
Red Lion Controls
Home > Products >
Redlion > Process Inputs
> Converters
|
 |
(800) 894-0412 (888) 723-4773 (Fax)
info@clrwtr.com |
Model IAMS |
IAMS Signal Conditioning Module
The IAMS - Universal Signal Conditioners unmatched capability provides users the ultimate in flexibility. As a
signal conditioner, the unit provides complete isolation and conversion capability to satisfy almost any application.
- Universal Input, Process, mA DC, VDC, TC, 100 (RTD, Potentiometer, and Linear Resistance)
- Universal Power Supply, 21.6 to 253 VAC/ 19.2 to 300 VDC
- 3-way Isolation (Power/Signal/Output)
- Choose Setpoints and/or Analog Output Models
- Programming/Display Module
- Programming Available in Seven Different Languages
|
|
If you are looking for Red Lion Process Inputs Signal Conditioners, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com we
will do our best to help you find the Red Lion Analog to Frequency Converter Module that you are looking for at the most
competitive prices possible. If you are searching for Red Lion Controls Universal Signal Converters technical information
(data-sheets) please use the datasheets or product selection guide page links.
|
Model AAMA |
AAMA Signal Conditioner Module
The AAMA3535 Universal Signal Conditioning Module can isolate and convert over 100 combinations of industry
standard analog signal ranges. The universal DIP switch selection feature eliminates the need to order and stock different
modules for each input and output signal.
- 3-Way Isolation of Analog Signals
- Switch Selectable Inputs & Outputs
- 100 Different Input and Output Combinations
- 18 to 30 VDC Powered
|
Model AFCM |
AFCM Analog To Frequency Converter
The configurable analog to frequency converter is used to convert analog standard signals to frequency signals
or pulse width modulated (PWM) signals. Input signal ranges are 0 - 20 mA, 4 - 20 mA, 0 - 10 mA, 2 - 10 mA, 0 - 10 V, 2 - 10 V,
0 - 5 V, or 1 - 5 V.
- Voltage/Current to Frequency Converter
- 3-way Isolation of Input / Output Signals
- Universal Conversion Module - Inputs and Outputs Selected via DIP Switch Settings
- Ultra Slim Design - Only 0.244" Wide
- 19 to 30 VDC Power
|
Model AIMI |
AIMI Loop Powered Isolators
The AIMI0202 passive isolator is used for the electrical isolation and processing of analog 0(4) to 20 mA
standard current signals. The AIMI0202 provides electrical isolation between the control electronics and process I/O. In
addition, interference signals above 75 Hz are effectively suppressed. Input and output circuit do not require separate auxiliary
power. The AIMI0202 obtains power from the input signal. The modules are snapped onto symmetrical DIN rails in accordance with EN
50 022.
- 0(4) to 20 mA Passive Loop Powered Isolator
- Provides Input/Output Isolation
|
Model IAMA |
IAMA Signal Conditioner
The IAMA - Universal Signal Conditioning Module Series can isolate and convert over 100 combinations of
analog signal ranges. The IAMA3535 converts and transmits signals linearly proportional to the input, while the IAMA6262
transmits the scaled square root of the input signal. This allows the IAMA6262 to provide a signal that is linear to flow rate
in applications utilizing a differential pressure transducer.
- 3-Way Isolation
- Switch Selectable Inputs & Outputs
- 100 Different Input and Output Combinations
- 9 to 32 VDC Powered
|
Model IAMA0006 |
IAMA0006 3-Way Isolating Amplifiers
The IAMA can isolate and convert over 35 combinations of analog signal ranges. The IAMA converts and transmits
signals linearly proportional to the input. DIP switch range selection eliminates the need to order and stock different modules
for each input and output signal range, and allows quick and convenient setup for over 35 standard signal conversions.
- 3-way Isolation Of Analog Signals
- Universal Conversion Module - Inputs And Outputs Selected Via Dip Switch Settings
- Over 35 Input And Output Analog Conversion Combinations
- Ultra Slim Design - Only 0.244" Wide
- 19 To 30 VDC Power
|
|
Our industrial automation supplies distributors warehouse in Boise, Idaho stocks some Redlion Controls
products enabling us to further assist you in finding the correct 0 (4) to 20ma passive loop powered isolator for your
application in the USA. Whether we have universal signal conditioning modules in stock in Boise, Idaho or need to ship direct
from Red Lion Controls to any USA cities; Clearwater Tech can get configurable 3-way isolating amplifiers to you fast and save
some money! It will be very helpful if you have the intelligent universal signal conditioning module part numbers ready, then our
sales representatives can provide you with a pricing and availability quote for universal signal conditioning module that you
are looking for in seconds. If you do not have the part numbers for analog to frequency converter modules, our application
engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
|
|
|
|
 |
|
| Part Number: |
|
|
Can't find a part number?
E-mail Us! |
|
|
