Clearwater Tech Logo

Red Lion Controls

Home   >   Products   >   Redlion   >   T16 &   >   P16 Series   >   Temperature/Process   >   Controllers

Red Lion Controls

The Model T16 Controller accepts signals from a variety of temperature sensors (thermocouple or RTD), while the Model P16 Controller accepts either a 0 to 10 VDC or 0/4 to 20 mA DC input signal. Both controllers can provide an accurate output control signal (time proportional or DC Analog Output) to maintain a process at a setpoint value. Dual 4-digit displays allow viewing of the process/temperature and setpoint simultaneously.

Red Lion P16/T16 Process/Temperature Controllers Distributors

T16/P16 Temperature/Process Controller

Front panel indicators inform the operator of the controller and output status. The comprehensive programming allows these controllers to meet a wide variety of application requirements.

The controller operates in the PID Control Mode for both heating and cooling, with on-demand auto-tune, that establishes the tuning constants. The PID tuning constants may be fine-tuned through the front panel and then locked out from further modification. The controller employs a unique overshoot suppression feature, that allows the quickest response without excessive overshoot. Switching to Manual Mode provides the operator direct control of the output. The controller may also be programmed to operate in On/Off mode with adjustable hysteresis.

If you are looking for Red Lion P16/T16 PID Controllers, please call us at (800) 894-0412 or email us at we will do our best to help you find the T1610010 PID controller that you are looking for at the most competitive prices possible. If you are searching for P1610010 PID controller technical information (data-sheets) please use the datasheets or product selection guide page links.

Optional alarm(s) can be configured independently for absolute high or low acting with balanced or unbalanced hysteresis. They can also be configured for deviation and band alarm. In these modes, the alarm trigger values track the setpoint value. Adjustable alarm hysteresis can be used for delaying output response. The alarms can be programmed for Automatic or Latching operation. A selectable standby feature suppresses the alarm during power-up until the temperature stabilizes outside the alarm region.

The optional DC Analog Output (10 V or 20 mA) can be configured and scaled for control or re-transmission purposes. The programmable output update time reduces valve or actuator activity.

The optional TP16KIT contains a programming module with a 9 pin RS232 connector, cable and Crimson, a Windows based configuration software. The software allows downloading, uploading and storage of T16 and P16 program files. All controllers have a communications port that allows configuration by PC even without controller power connected. Controller calibration is also possible using the software when the proper calibration equipment and controller power is connected.

The controller is constructed of a lightweight, high impact, black plastic textured case and bezel with a clear display window. The front panel meets NEMA 4X/IP65 specifications when properly installed. In applications that do not require protection to NEMA 4X, multiple controllers can be stacked horizontally or vertically. Modern surface-mount technology, extensive testing, plus high immunity to noise interference makes the controller extremely reliable in industrial environments.

All safety related regulations, local codes and instructions that appear in the manual or on equipment must be observed to ensure personal safety and to prevent damage to either the instrument or equipment connected to it. If equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired.

Do not use the controller to directly command motors, valves, or other actuators not equipped with safeguards. To do so can be potentially harmful to persons or equipment in the event of a fault to the controller. An independent and redundant temperature limit indicator with alarm outputs is strongly recommended.

Whether we have T1611110 temperature controllers in stock in Boise, Idaho or need to ship direct from Red Lion Controls to any USA cities; Clearwater Tech can get P1611110 process controllers to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some Red Lion Controls products enabling us to further assist you in finding the correct Red Lion T1620010 PID controller in the USA, Canada, or Mexico. It will be very helpful if you have the P1620010 PID controller part numbers ready, then our sales representatives can provide you with a pricing and availability quote for T1610000 temperature controller that you are looking for in seconds. If you do not have the part numbers for P1610000 process controllers, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check

Part No:

Search Tips
Can't find a part number?
E-mail Us!

Weidmuller Terminals

Locking Together Housing Halves enable a separable and easily mounted joint for connection of system components. The use of proven Weidmuller clamping yoke connection systems guarantees a maintenance-free and vibration-proof joint. The finger-touch safe insulated housing, designed in flammability class UL 94-V0, can be marked with standard Weidmuller markers. WGK panel feed-through terminals are available for rated cross-sections of

WEG Soft Starters

WEG Soft Starter SSW-06 series are static starters intended to accelerate, decelerate and protection of three phase induction motors. The control of the voltage applied to the motor by the means of the thyristors triggering angle variation, allows the soft start to start and stop smoothly an electric motor. With adequate adjustments of the variables, the torque produced is adjusted to the needs of the load, so the required current is going to be