 |
(800) 894-0412 (208) 368-0415 (Fax) info@clrwtr.com |
|
From parallel helical to right angle helical-bevel and helical-worm gearing, to mechanical
adjustable drives, to planetary gear units and servodrives - SEW-Eurodrive offers the industry's
Broadest Range Of Gearmotors and speed reducers. Combine this selection with
SEW Eurodrive's vast modular components program - there are more than 1.2 million custom configurations available - and you get
an Integrated Drive Solution that is truly optimized for your application.
|
 Parallel-Shaft |
SEW-Eurodrive's F-Series parallel helical gearmotor lives up to its name as the ideal drive for tight
space conditions. This compact drive, with its multiple mounting configurations, is a rugged alternative to right-angled
gearmotors.
|
|
If you are looking for SEW Eurodrive Motors & Drives, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com we
will do our best to help you find the Eurodrives Gearmotors that you are looking for at the lowest prices possible. If you
are searching for Eurodrive Motors & Inverter Drives technical information (data-sheets) please use the
Eurodrives Datasheets OR
Product Selection Guide page links.
|
 MOVIMOT |
The MOVIMOT, SEW-Eurodrive's smart gearmotor, offers cost-effective integrated control for gearmotors
from 0.5 to 5 hp. This compact drive, mounted directly on the motor, saves enclosure space which saves you money. Since it
mounts to standard SEW motors, it can easily be retrofitted in the field. And its aluminum housing makes it rugged for
environmentally tough applications.
|
 Parallel-Helical |
SEW-Eurodrive's R-Series Parallel Gearmotors deliver exceptional performance and reliability combined with
low maintenance. Available in many configurations, they distinguish themselves with their efficiency and durable gearing.
|
 Servomotors |
SEW-Eurodrive servo-drives offer many advantages over conventional drive systems; faster cycle rate,
greater positioning accuracy, higher dynamic performance, wider speed control range, full torque at zero speed, and higher
overload capability. SEW servo-motors can be combined with either our modular or stand-alone MOVIDYN Servo-Amplifiers and
low-backlash planetary gearing, or with any of SEW's wide range of conventional helical and helical-bevel gearing.
|
 Helical-Bevel |
SEW-Eurodrive's K-Series right angle helical-bevel gearmotors deliver maximum performance and reliability
with 95%+ efficiency and high torque density. Durable gearing designed for long service life makes this drive an ideal choice for
around-the-clock applications.
|
 MOVITRAC |
The unique modular architecture of the SEW Eurodrive MOVITRAC 07 lets you configure each unit to the exact
requirements of your application, easily and cost effectively. The full range of SEW Eurodrive MOVITRAC frequency drive modules
offers an array of advanced capabilities from high-speed fieldbus networking to position, speed and synchronous operation
control.
|
 VARIMOT & VARIGEAR |
SEW-Eurodrive's VARIMOT mechanically-adjustable gear units deliver straight forward operation and robust
performance in applications requiring mechanical stepless speed variation.
SEW Eurodrive VARIGEAR mechanically-adjustable drives can be combined with a large variety of SEW speed
reducers in virtually any system requiring variable-speed gearmotors with low output speed and high output torque. They can also
be used without reduction as direct machine drives, either in the foot-mounted or flange-mounted configuration. The speed
adjustment range of SEW mechanically-adjustable variable-speed gearmotors may be further extended through the use of multi-speed
motors.
|
 W-Series SPIROPLAN |
The W20 Series and W30 Series right angle gearmotors are single-stage units with unique Spiroplan gearing.
They differ from worm gears in their steel-on-steel material combinations and special tooth meshing design which makes
wear-resistance and quiet operation possible.
|
 MOVIDRIVE |
Now there's a single SEW Eurodrive drive inverter that can solve all your variable-speed drive problems.
From simple drives for pumps and fans, to the highly precise servo drives used in packaging and automated assembly systems,
SEW Eurodrive MOVIDRIVE delivers dramatic performance improvements in virtually every application.
MOVIDRIVE comes in four series:
- MDF for sensorless flux-vector control of induction motors. (speed range 200:1)
- MDV for closed-loop flux-vector control of induction motors. (speed range 5000:1)
- MDS for SEW permanent magnet A/C servo motors. (speed range >3000:1)
- MDR for regenerative loads.
|
 Helical-Worm |
SEW-Eurodrive's S-Series gearmotors offer helical-before-worm gearing that combines durability with
power-packed performance in a compact design requiring no motor belts or couplings.
|
 Brakemotors |
SEW Eurodrive squirrel-cage motors and brakemotors deliver exceptional performance. SEW Eurodrive AC &
Brakemotors have a great reliability combined with low maintenance which provides you with an excellent quality. SEW Eurodrive
Brakemotor is designed for continuous duty under tough service conditions, these low noise SEW Brakemotors are used wherever
fast, safe braking is a major application requirement.
|
 Speed Reducers |
SEW-Eurodrive's M-Series speed reducers offer the capacity and application-designed performance demanded of
a heavy industrial drive. With over 50 years of engineering expertise and worldwide product support, SEW's M-Series reducers
are available in a configuration suited for your needs.
Product Range:
- Helical and bevel-helical
- Ratios from 1:1 to 1800:1 and beyond with geared inputs
- Single to quintuple reduction within one housing
- Torque capacities to 1.6 million lb-in., and input capacities to 4500 HP
|
 P-Series |
SEW-Eurodrive's P-Series combination planetary Gearmotors
offers high power density in the high power range. Inline co-axial and right angle configurations add design flexibility.
Product Range
- Helical and bevel-helical
- Ratios from 100:1 to 4200:1
- Torque capacities to 4,000,000 lb-in. and input capacities to 180 HP
|
 TorqLOC Mounting System |
A typical keyed hollow shaft is made from carbon steel and is likely to corrode to a customer's solid
shaft. In time, an attempt to separate the two shafts may prove to be impossible. In contrast, SEW Eurodrive's TorqLOC requires
no key and should remain corrosion free, even after years of service. It contacts the customer's solid shaft in only two
places - at the support bushing and at the torque bushing.
The support bushing is bronze and will not corrode to steel due to the nature of dissimilar metals. The
torque bushing is either electro less nickel-plated 1045 carbon steel or stainless steel - neither of which corrode to carbon
steel. Furthermore, the high clamping forces located at the torque bushing prohibit the presence of oxygen so oxidation (rust)
cannot occur.
|
 Servo Gear Units |
The low backlash PSF/PSKF planetary servo gear units from SEW-EURODRIVE in single-stage and two-stage
versions are, thanks to their structural design, very compact and allow for high torque and overhung loads. They are available
in eight sizes with high torsional rigidity and cover a torque range of 25 to 3000 Nm (220 to 26550 in-lb). They can be
accelerated with torques of up to 4200 Nm (37170 in-lb).
|
 SL2 Series Linear Servos |
The high demands on machine cycle times, accelerations and linear travel speeds for drive systems in
handling, transportation and production are increasing steadily. Whether for highly dynamic or flexible processing machines,
material handling or pick-and-place applications, the new SL2 synchronous linear motors from EURODRIVE are the ideal
solution to meet these demands.
|
 Overhead Trolley Drives |
SEW Eurodrive HW30/HS40 Series Light-Load overhead trolley drives are quiet and comply with C1 guideline
standards (VDI guideline 3643). They work with a reliable disengageable coupling and provide the following advantages:
- Low-maintenance for a high level of availability and productivity
- Smooth running for operation without vibration
- Low-noise for use in manual work stations
- Compact for space-saving installation
|
 Explosion-Proof |
Directive 94/9/EC or ATEX lays down new regulations for explosion protection in all types of devices for
the European market. This directive applies to gearmotors and motors. As of July 1, 2003, Directive 94/9/EC applies without
restrictions to the use of gearmotors and motors within the European Union. Other European countries, such as Switzerland, have
since come into line with this regulation.
|
 MOVIGEAR |
In many industries, such as the automotive, food and beverage industries, airport logistics or general
transport logistics, the demands on materials handling systems are becoming both more complex and more specific. At the same
time, less installation space is available for meeting these demands. As a result, SEW-EURODRIVE decided to research and
develop an optimum application solution to suit these criteria. The result is the mechatronic drive system MOVIGEAR. It has an
advantageous, compact design and is ideal for ensuring that conveyor systems are structured as efficiently as possible.
|
 MOVIAXIS |
With its new MOVIAXIS multi-axis servo inverters, SEW-EURODRIVE offers innovative, future oriented
solutions in the field of highly dynamic servo drive technology. These units handle dynamic and accurate application and
automation tasks with optimized expenditure of time, costs and resources. Depending on the machine and system concept required,
MOVIAXIS multi-axis servo drives can be combined flexibly and adapted to meet automation requirements.
|
 Servo Gearmotors |
The helical-bevel gear units from SEW EURODRIVE provide a high degree of efficiency of approx. 95 % in
both directions of torque and at any input speed in the long-term. The gearing is designed for high endurance and thus makes for
a high-torque, wear-free drive. The remarkably high efficiency of our helicalbevel gearmotors makes them energy-efficient
angular drives. As they also have a long maintenance-free service life, they can be used with AC asynchronous motors,
asynchronous and synchronous servomotors in every application.
|
 MOVIFIT |
The new MOVIFIT system combines the established advantages of EURODRIVE decentralized installation
technology with modern, application-oriented drive and communication functions. For years now, the components from
SEW-EURODRIVE's decentralized drive system have been proving how compact and modular a decentralized system structure can be in
diverse applications. Nevertheless, drive engineering requirements are becoming increasingly demanding even in this field. The
following are examples of some of the demands made on materials handling technology:
|
 Industrial Gear Units |
Robust and universal SEW Eurodrive gear unit X series which can be optimally adjusted to the task due to
finely stepped torque ratings. The universal modular system concept sets new standards with respect to availability and offers a
broad range of application options, e.g. for materials handling systems, ball mills, and agitators. Application gear units, such as
for bucket elevators, complete the range.
|
 Other Products, Services & Tools |
Drive engineering from SEW-EURODRIVE meets the challenge of avoiding industrial accidents while
maintaining trouble-free and economical system operation. Compliance with DIN EN 954-1 and EN 13849-1, intended to minimize the
risk posed to people by technical equipment, allows for the installation of system control that monitor the production process
instead of switching it off. The control systems applied must satisfy the relevant requirements regarding safety and performance
level.
|
Our Eurodrives Distributors warehouse in Boise, Idaho stocks some Eurodrive products enabling us to
further assist you in finding the correct Eurodrive Motors and Drives for your application in the USA, Canada and Mexico.
Whether we have Eurodrive Drives and Motors in stock in Boise, Idaho or need to ship direct from Eurodrive to any USA
cities; Clearwater Tech can get Eurodrive Motors and Drives to you fast and save money! It will be very helpful if you have the
Eurodrive Drives & Motors part numbers ready, then our sales representatives can provide you with a pricing and
availability quote for Eurodrive Motors & Drives that you are looking for in seconds. If you do not have the part numbers
for Eurodrive Gearmotors and Frequency Inverter Drives, our application engineers will be able to help you figure out the part
numbers and get the price quote to you as soon as possible.