July 29, 2011
LEESON Reducers
All Stock & Custom 700 Series Reducers
are identified by a catalog number - for example P7131001.B1. The catalog number appears on the nameplate and describes
pertinent features of the reducer. If a base or output flange is installed to a reducer at LEESON, the assigned Mod-Squad
suffix code (ie:B1) will be added to the catalog number. Accessories that are field installed will not be noted on the reducer
nameplate.
|
ABB Drives
The Assistant Control Panel,
which is delivered as standard, features a multilingual alphanumeric display for easy drive programming. The control panel has
various assistants and an built-in help function to guide the user. It includes a real time clock, which can be used during
fault logging and in controlling the drive, such as start/stop. The control panel can be used for copying parameters
|
|
|
|
 |
(800) 894-0412 (888) 723-4773 (Fax)
info@clrwtr.com |
K-Series Right Angle Helical-Bevel |
SEW-Eurodrive's K-Series right angle helical-bevel gearmotors deliver maximum performance and reliability
with 95%+ efficiency and high torque density. Durable gearing designed for long service life makes this drive an ideal choice for
around-the-clock applications.
Helical-bevel gear units from SEW-EURODRIVE provide a high degree of efficiency of over 96 % in both torque
directions and at all input speeds. With performance designed to last - high-endurance gearing enables high-torque, wear-free
drive. With our remarkably highly efficient helical-bevel gearmotors, you have energy-saving angular gear drives at your
disposal. As they also have a long maintenancefree service life, they can be used with AC asynchronous motors,
Asynchronous & Synchronous Servo Motors in every application. A reduced
backlash version is available for precise positioning tasks.
|
|
If you are looking for SEW Eurodrive K-Series Gearmotors, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com
we will do our best to help you find the SEW Eurodrive K-Series Right Angle Helical Bevel Gear Boxes that you are looking for
at the most competitive prices possible. If you are searching for SEW Eurodrive K-Series Gearbox technical information
(data-sheets) please use the datasheets or product selection guide page links.
Standard Features
Reducers
- Gears manufactured from certified steel, heat treated to a case hardness of 58-62 Rockwell C for long gear life.
- Finished ground or shaved gear teeth to assure maximum mechanical efficiency (1-1/2% loss/gear stage) with low noise
and heat.
- High capacity anti-friction bearings submerged in oil and splash lubricated for optimum load carrying capacity and
long life.
- Double output seal design consisting of patented bi-helix inner seal made of Viton and double-lipNitrile (Buna-N)
outer seal.
- Captured keys on output shafts.
- Gearcases made of high strength gray cast iron, SAE Class 30.
- High cross-section modulus design, with center wall for maximum rigidity.
- Available with inch dimension, hollow or solid output shafts.
Motors
- NEMA Design C.
- Inverter duty.
- Connection terminals
- Extremely low motor inertia.
- CE Mark for shipment into Europe.
Mounting Configuration
- Multiple mounting options including foot, flange or shaft mounts.
- Suitable for mounting in any position.
- Available as a gearmotor or a gear brakemotor.
Optional Features
- Hollow or solid output shafts available in metric sizes.
- Double output seal design consisting of patented bi-helix inner seal made of Viton and double-lipNitrile (Buna-N) outer
seal.
- Severe duty protection.
- Long-term storage protection.
- 50 Hz motors for worldwide use.
- Motors with high cycling capacity fail-safe brake.
- Forced cooling for low frequency motor operation.
- Thermostat or thermistor protection.
Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some SEW Eurodrive
products enabling us to further assist you in finding the correct helical-bevel gear unit with hollow shaft in the USA, Canada and
Mexico. Whether we have helical-bevel gear unit with hollow shaft and splined hollow shaft to DIN 5480 in stock in Boise, Idaho
USA or need to ship direct from SEW Eurodrive to any USA cities; Clearwater Tech can get helical-bevel gear unit with keyless
hollow shaft and shrink disk to you fast and save you some money! It will be very helpful if you have the helical-bevel gear unit
for keyless hollow shaft mounting with the use of interchangeable tapered bushings part numbers ready, then our sales
representatives can provide you with a pricing and availability quote for helical-bevel gear unit in B14 flange-mounted version
with hollow shaft that you are looking for in seconds. If you do not have the part numbers for helical-bevel gear unit in B14
flange mounted version with hollow shaft and splined hollow shaft to DIN 5480, our application engineers will be able to help you
figure out the part numbers and get the price quote to you as soon as possible.
|
|
|
|
 |
|
| Part Number: |
|
|
Can't find a part number?
E-mail Us! |
|
|
