Our modular system for AC motors offers millions of possible drive combinations. And they are available worldwide because our AC motors meet all the requirements of efficiency classes up to IE4 and cover a power range from 0.09 kW to 225 kW. The modular system offers a wide range of brakes, encoders, plug connectors, forced cooling fans, special coatings and surface treatments to choose from to implement the drive that optimally suits your specific application.
DR & DT56 Series (1 Speed)
We offer you the ideal AC motor for any requirement: 2, 4 and 6-pole motors, with powers of 0.18 kW to 225 kW and in the efficiency classes IE1 to IE4. Give us and our DR series motors a try! With the DR modular motor system, we implement millions of drive combinations and move different systems and machines, worldwide. It is easy to find the ideal energy-efficient motor for your application at SEW-EURODRIVE. The DR series has a suitable design in its range for the globally applicable efficiency classes IE1 to IE4: DRS for IE1, DRE for IE2, DRN and DRP for IE3 and DRU for IE4. Select the power and frequency within this motor design and you have already taken care of the most important selection criteria.
If you are looking for SEW Eurodrive AC Motors, please call us on (844) 331-9373 or email us at email@example.com we will do our best to help you find the SEW DR & DT56 (1 Speed) motor that you are looking for at the most competitive prices possible. If you are searching for SEW Eurodrive pole changing 2 speeds motor technical information (data-sheets) please use the datasheets or product selection guide page links.
Pole-Changing DR Series (2 Speeds)
The simple way of controlling machine and plant speeds economically: 2-speed motors. We offer pole-changing DR series AC motors with a power combination from 0.15 kW / 0.20 kW to 18 kW / 34 kW. With this large selection, you are sure to find the suitable motor for your application. We supply pole-changing 2-speed AC motors in sizes and designs DR63 and DRS.. as 4/2 and 8/4-pole motors with speeds in a ratio of 1:2 and as 8/2-pole motors with speeds in a ratio of 1:4 (DRS only). These motors also come from our modular system - take advantage of its benefits: for example, we offer pole-changing AC motors for countries with a 50 Hz or 60 Hz line frequency, with the required voltage of course.
DR***J Variant Synchronous (LSPM Technology)
The DR**J line start permanent magnet (LSPM) motor is an AC motor with squirrelcage motor with permanent magnets in the rotor. After an asynchronous start, the motor synchronizes with the operating frequency and runs in synchronous mode. With their compact and sturdy design, the DR..J motors with LSPM technology offer additional, interesting synergies. Due to their operating principle, there are no rotor losses. The result is a very high efficiency in a very compact design. DR..J motors combine the advantages of the durable and rugged asynchronous motor with those of the low-loss, compact synchronous motor. They are designed for operation on simple frequency inverters with V/f control. In addition, direct operation on the grid is possible in low-inertia applications.
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some of SEW Eurodrive Products enabling us to further assist you in finding the correct helical gear unit for your application in the USA, Canada and Mexico. Whether we have RM-series gearmotors in stock in Boise, Idaho or need to ship direct SEW Eurodrive to any USA cities; Clearwater Tech can get RX-series gearmotors to you fast and save money! It will be very helpful if you have the R-series gear motors part numbers ready, then our sales representatives can provide you with a pricing and availability quote for RX-series gear boxes that you are looking for in seconds. If you do not have the part numbers for RM-series geared motors, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
WEG Crusher Duty W22 Motors are specifically designed to meet the demanding requirements of the rock crushing industry. FC-200 grade cast iron, provides superior strength and heat dissipation. And 4140 high-strength steel shafts keep the motor running when others fail. These motors are designed for vertical or horizontal mounting and have exceptional high starting and breakdown torque.
The NC Contacts will reliably open, even if they are welded, and stop the machine. XW series switches offer up to four "safe-break" contacts with a depth behind the panel that is half the size of conventional E-Stop switches. This means that there is an additional contact available and the switches can be used in Level 4 safety category applications. New additions to the XW series include a smooth button, which resists dirt buildup