April 28, 2009

Yaskawa Drives

The Significant Size Reduction has been accomplished without sacrificing the essential programming features of our larger drives. The VS mini offers power and versatility for a wide range of applications including material handling, packaging, mixing, pumping, HVAC, commercial wash machines, recreation equipment (tread mills), overhead doors and general industrial applications. Available in both standard protected chassis and optional Din rail designs.

ABB Drives

Open Loop Dynamic Speed Control accuracy matches that of AC drives using closed loop flux vector control. The ACS800 delivers static speed control accuracy of 0.1% to 0.5% of nominal speed - more than adequate for most industrial applications. In applications requiring even more precise speed regulation, an optional pulse encoder can be used. With an open loop torque step rise time of less than 5 milliseconds - compared to over 100 ms in AC drives using sensorless flux

SEW Eurodrive


Home   >   Products   >   SEW (USA)   >   Servo Gearmotors

SEW Eurodrive

(800) 894-0412       (888) 723-4773 (Fax)

SEW Eurodrive R Series Helical-Bevel Servo Gearmotors Distributors
SEW Eurodrive R-Series Servo Gearmotors

The helical-bevel gear units from SEW EURODRIVE provide a high degree of efficiency of approx. 95 % in both directions of torque and at any input speed in the long-term. The gearing is designed for high endurance and thus makes for a high-torque, wear-free drive. The remarkably high efficiency of our helicalbevel gearmotors makes them energy-efficient angular drives. As they also have a long maintenance-free service life, they can be used with AC asynchronous motors, asynchronous and synchronous servomotors in every application.

If you are looking for SEW Eurodrive Servo Gearmotors, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the SEW Eurodrive Servo Gear Motors that you are looking for at the most competitive prices possible. If you are searching for SEW Eurodrive Servo Gearmotor technical information (data-sheets) please use the datasheets or product selection guide page links.

System solutions with servo gearmotors: All designs and sizes of the helical, Parallel Shaft Helical, Helical-Bevel and Helical-Before-Worm Gear Units can now also be mounted to the DS, CM and CMP Synchronous Servomotors and to the CT/CV Asynchronous Servomotors from SEW-EURODRIVE. The /R option, i.e. reduced circumferential backlash in conjunction with high efficiency ratings and a high endurance gearing, provides for servotypical advantages for these gear units, such as a high positioning accuracy.

The MOVIDRIVE Inverters, the powerful MOVIAXIS Series and their diverse options provide for functional, scalable and intelligent systems that ensure the maximum utilization of all components. The standard gear units of the 7-series excel by their efficiency, power density and wide range of variants. The synchronous servomotors offer precision, dynamics and torque in a particularly compact design. The combination of these gear units and motors sets global standards. The innumerable variety of the SEW-EURODRIVE modular system is now also available for servomotors, offering you all the freedom you require.

SEW Eurodrive S Series Helical-Worm Servo Gearmotors Distributors
SEW Eurodrive S-Series Servo Gearmotors

SEW Eurodrive Helical-Worm Servo Gearmotors are particularly space saving when installed as angular drive. Their good dampening properties are yet another advantage of the simple, mechanical design. Torque shocks are reduced as the power transmission to the drive shaft is linear. The noise of this type is very low, even when operating at full capacity. The helical-worm gearmotors by SEW-EURODRIVE can therefore even be used for stage lifts.

SEW Eurodrive RX Series Helical Servo Gearmotors Distributors
SEW Eurodrive RX-Series Servo Gearmotors

SEW Eurodrive Helical Servo Gearmotor's variety of sizes meets virtually any requirement. The RX57 to RX107 single stage gear units offer space-saving solutions for a high output speed. If every kilogram counts, you may benefit from a solution with multi-stage gear units: Due to their die-cast aluminum design, the R07, R17 and R27 models are three particularly efficient lightweights - ideal as satellite drives and for use in light machine constructions.

SEW Eurodrive F-Series Parallel-Shaft Helical Servo Gearmotors Distributors
SEW Eurodrive F-Series Servo Gearmotors

SEW Eurodrive Parallel-Shaft Helical Servo Gearmotor is a standard drive that not only excels by its power but also by its design characteristics. Parallel shaft helical gearmotors by SEW EURODRIVE are typically used in materials handling and process engineering applications where they reliably implement all kinds of drive solutions.

SEW Eurodrive W-Series SPIROPLAN Right-Angle Servo Gearmotors Distributors
SEW Eurodrive W-Series Servo Gearmotors

SEW Eurodrive SPIROPLAN servo gearmotors with directly mounted CMP synchronous servomotors operate at a high level of efficiency while being low-noise at the same time. They offer a great variety of mounting positions to allow for greatest possible flexibility for the customer. The SPIROPLAN right-angle gear units W37/W47 achieve great velocities at extremely low gear ratios. The wear-free gear components minimize friction losses and optimize the mechanical efficiency. The gearing results in an extremely low-noise performance. The low purchasing and life cycle costs make these drives ideally suited for simple conveyor applications.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some of SEW Eurodrive products enabling us to further assist you in finding the correct SEW Eurodrive W-Series for your application in the USA, Canada and Mexico. Whether we have SPIROPLAN servo gearmotor in stock in Boise, Idaho or need to ship direct SEW Eurodrive to any USA cities; Clearwater Tech can get SEW Eurodrive F-Series to you fast and save money! It will be very helpful if you have the parallel shaft helical servo geared motor part numbers ready, then our sales representatives can provide you with a pricing and availability quote for SEW Eurodrive RX-Series that you are looking for in seconds. If you do not have the part numbers for RX57 to RX107 single stage gear motor, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Part Number:

Search Tips

Can't find a part number?
E-mail Us!

Parallel-Shaft Helical