SEW Eurodrive Synchronous & Asynchronous Servomotors Distributors

March 01, 2009

Hitachi L700

The L700 Series Drive Models with capacities of 11 to 30 kW have an internal regenerative braking circuit. Connecting an optional regenerative braking resistor to RB and P terminals increases the regenerative torque. The L700 series inverter conforms to the requirements of Electromagnetic Compatibility (EMC) Directive (2004/108/EC). The inverter must be installed indoors (not exposed to corrosive gases and dust) at an altitude of 1,000 m or less.

Lenze Servomotors

Lenze MAS series of motors provide an excellent combination of price and performance. For economical, high precision servo control in low to mid-level industrial duty applications, these motors make a great fit. Power ranges from 200W up to 1kW, and these motors come standard with 1 meter of cabling for motor power and feedback. Three IP55 frame sizes are available: 54mm, 76mm, and 86mm.

SEW Eurodrive	Loading
Home > Products > Eurodrive (USA) > Servomotors

	(800) 894-0412 (208) 368-0415 (Fax) info@clrwtr.com
SEW Eurodrive CMP Series Synchronous Servomotors	SEW Eurodrive CMP servomotors feature precision combined with dynamic and powerful performance in a particularly compact design. The length of the motor has been optimized so that you can operate it even in applications with very limited space. The highly dynamic servomotors round off the CMP servomotors offered by SEW-EURODRIVE in the lower torque range. Standstill torques from 7.1 Nm to 0.5 Nm are covered by three CMP motor sizes and a total of eight motor steps. The latest winding and magnet technology give the CMP servo motors a very low mass moment of inertia despite the increase in performance. The result is a motor system with high dynamic properties.
If you are looking for SEW Eurodrive Servomotors, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the SEW Eurodrive Synchronous Servo Motors that you are looking for at the most competitive prices possible. If you are searching for SEW Eurodrive Servomotor technical information (data-sheets) please use the datasheets or product selection guide page links.
SEW Eurodrive DS/CM Series Synchronous Servomotors	Highly dynamic applications are the ideal operating situation for our synchronous servomotors. The new CM motor series, which is available in three sizes, each with three lengths, covers the 5 to 70 Nm static torque range. Equipped with high-energy NdFeB magnets, this motor offers high overload behavior of 400 % standstill current as standard. The CM servomotor owes its compact design with very high power density to the new magnetic circuit layout. Series DS with its three lengths covers the 1 to 4 Nm static torque range. The acceleration torque of all motor sizes is three to four times the static torque. The motors feature thermal motor protection and resolver feedback for motor control as standard.
SEW Eurodrive CMD Series Synchronous Servomotors	SEW Eurodrive CMD series servomotors are ideal when the highest dynamic properties are required in the smallest spaces. The CMD motor is a direct servomotor without housing and with a standard square flange. Available in 4 sizes, it covers the 0.25 Nm to 16.5 Nm static torque range. The short stator and wide cross-section allow for highly dynamic motors with high short-term overload capacity to be used in the smallest spaces.
SEW Eurodrive CT/CV Series Asynchronous Servomotors	SEW Eurodrive CT/CV series asynchronous servomotors are used primarily when high external mass moments of inertia acting on the motor shaft must be controlled reliably. The particularly compact unit, which consists of a Gear Unit and sturdy asynchronous servomotor in four speed classes and has A High-Resolution Sin/Cos Encoder, achieves high speed consistency even at low speeds. Reliable and precise positioning of asynchronous servomotors is possible with the CFC control mode of the MOVIDRIVE Inverters and MOVIAXIS Multi-Axis Servo Drives at peak values up to 300 % of the rated motor torque.
SEW Eurodrive Servomotors	SEW-Eurodrive servo-drives offer many advantages over conventional drive systems; faster cycle rate, greater positioning accuracy, higher dynamic performance, wider speed control range, full torque at zero speed, and higher overload capability. SEW servo-motors can be combined with either our modular or stand-alone MOVIDYN Servo-Amplifiers and low-backlash planetary gearing, or with any of SEW's wide range of conventional helical and helical-bevel gearing.
Standard Features Exportability 380-500 VAC input standard for SEW-Eurodrive worldwide means your exported product will receive the same high level of technical and product support, wherever it goes. CE Mark for shipment into Europe. Control Features Operable in torque, speed, or position control mode. Available in a line-regenerative model to eliminate the need for a dynamic braking resistor. Modular system allows mounting of heatsink outside of control cabinet to reduce cooling requirements. Communication RS-232/RS-485 communication capabilities. Windows-like software interface for programming, diagnostics, and tuning. Auto-tuning feature speeds set up and commissioning. Optional PROFIBUS or InterBus-S bus interface cards for system networking. Close to Home Servo-motors, planetary gearing, and standard gearing assembled per order in the U.S. Electronic components, options, and accessories stocked in the U.S. Qualified technical staff to assist in applications and service support.

SEW Eurodrive electric cylinders of the CMS series are equipped with permanent magnet rotors and operate especially accurately, powerfully, and quickly. Combined with drive electronics from SEW-EURODRIVE, they form economical, energy-efficient drive solutions that ensure a high level of process reliability in system operation and are easy to integrate into existing automation systems, e.g. welding equipment and robotic systems.

The introduction of new servo products, such as dynamic servomotors (CMP), powerful servo controllers (MOVIAXIS) and Low Backlash Servo Gear Units (PS.F and BS.F) open up new fields of application to SEW-Eurodrive in the servo technology. Due to the high power density and accurate sequences of movements, planetary servo gear units support machine manufacturers in the development of extremely compact machines. The scaling of machines for various markets requires drive combinations that are adjusted to the specific markets.

The new PS.C Gear Units meet the customer and market requirements to be able to combine different machines with the optimum drive. The development has been optimized for production, which means that the PS.C planetary servo gear units have a good starting point in the market as far as sales prices are concerned, and guarantees the production of the gear units at the Östringen plant. Adding the new PS.C planetary gear units to the SEW Eurodrive servo gear unit portfolio has created new possibilities and options for SEW-Eurodrive servo drive systems to satisfy the requirements of the various market segments in a more efficient way.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some of SEW Eurodrive products enabling us to further assist you in finding the correct SEW Eurodrive CMP Series for your application in the USA, Canada and Mexico. Whether we have DS/CM series synchronous servo motor in stock in Boise, Idaho or need to ship direct SEW Eurodrive to any USA cities; Clearwater Tech can get SEW Eurodrive CMD series to you fast and save money! It will be very helpful if you have the CT/CV series asynchronous servo motor part numbers ready, then our sales representatives can provide you with a pricing and availability quote for SEW Eurodrive CMS series that you are looking for in seconds. If you do not have the part numbers for CMP series dynamic servo motor, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.