M-Series
Gear Reducer
Compact-Series
Heavy Duty
May 25, 2010

LEESON Reducers

All new stock and custom 800 Series Grove Gear & Electra-Gear reducers are identified by a model number. The model number appears on the nameplate and describes pertinent features of the reducer. All reducers also have a catalog number for example EL8130001 and GR8130001. Reducers and renewal parts should be ordered by catalog number.
WASHGUARD Reducers

Panasonic PLC

Aromat NAiS introduces the new ultra fast compact FP-X series Panasonic PLC after great success with the compact FP0 series. The FP-X Panasonic PLC is set to redefine the industrial brick style PLC with new levels of expandability in a small robust package.
PLC Controllers

SEW Eurodrive

Home   >   Products   >   SEW   >   Speed Reducers

SEW Eurodrive

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

SEW Eurodrive R-Series Speed Reducers Distributors
R-Series Speed Reducers

SEW Eurodrive helical, parallel shaft helical, helical-bevel and helical-worm gear units are equipped with an input shaft assembly. The input shafts have inch dimensions. Metric dimensions are provided on request. The end of the input shaft has a tapped hole to aid in mounting drive components. The bearings of the input shaft are lubricated by grease. Natural Buna Rubber oil seals and o-ring seals are used for sealing the cover. The rugged bearings of the input shaft permit high overhung loads. Consult your SEW Eurodrive assembly facility if oil bath lubricated bearings are required.

If you are looking for SEW Eurodrive Speed Reducers, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the SEW Eurodrive M-Series Heavy Industrial Speed Reducer that you are looking for at the lowest prices possible. If you are searching for SEW Eurodrive Compact-Series Speed Reducers technical information (data-sheets) please use the Eurodrive Gear Reducer Datasheets OR Product Selection Guide page links.

SEW Eurodrive S-Series Speed Reducers Distributors
S-Series Speed Reducers

AM adapters are used for mounting motors built according to the IEC standard or NEMA(design C or TC) on to SEW Eurodrive helical, parallel shaft helical, helical-bevel and helical-worm gear units. Adapters for NEMA motors are available for sizes 56 to 365. Adapters for IEC motors are available for sizes 63 to 280. The designation of the adapter size corresponds to the relevant NEMA or IEC motor size.

Torque is transmitted between the motor and the gear unit via a positive shock resistant jaw-type coupling. Vibrations and shocks which occur during operation are cushioned by an inserted polyurethane annular gear.

SEW Eurodrive Stainless Steel Helical & Helical Bevel Gear Reducers Distributor
Stainless Steel Helical & Helical Bevel Reducer

SEW-EURODRIVE announces the immediate release of the new RESF37 stainless steel helical gear reducer and KESA37 stainless steel helical bevel gear reducer. Efficient, long-life helical and helical bevel gearing means these units use less energy, run cooler and last longer than typical single-worm gear units. The material, design and smooth finish mean high resistance to bacteria, chemicals and processes common to the food processing industry. Traditional single-worm reducers commonly found on processing equipment are inefficient and wear over time. Helical bevel gears have an infinite life, and are 50% more efficient than single worm gears.

The new stainless steel speed reducers are new on the outside, but inside you'll find the same high-quality gearing the industry has relied on for decades. The shaft-mounted gear units are available with TorqLOC, SEW-EURODRIVE'S compact keyless hollow shaft mounting system. TorqLOC combines interchangeable bronze bushings and a stainless steel clamping ring for mounting onto various sized solid shafts. This eliminates the need for high tolerance machining of the shaft and ensures the reducer can be easily removed even after years of service in the harshest environments.

The RESF37 and KESA37 are available with NEMA C-face motor adapters, IEC adapters or as gearmotors. Other options include seals to provide IP69K protection and food grade oil. All shafts and hardware are high quality stainless steel as standard. The new RESF37 and KESA37 stainless steel gearboxes from SEW-EURODRIVE are available with ratios up to 134.82 and 106.38:1 respectively. Both have an input power rating of up to 3 HP and an output torque rating of 1,770 lb-in.

SEW Eurodrive M-Series Heavy Industrial Speed Reducers Distributor
M-Series Heavy Industrial Reducer

SEW-Eurodrive's M-Series speed reducers offer the capacity and application-designed performance demanded of a heavy industrial drive. With over 50 years of engineering expertise and worldwide product support, SEW's M-Series reducers are available in a configuration suited for your needs.

Product Range:

  • Helical and bevel-helical
  • Ratios from 1:1 to 1800:1 and beyond with geared inputs
  • Single to quintuple reduction within one housing
  • Torque capacities to 1.6 million lb-in., and input capacities to 4500 HP

Standard Features:

  • Manufactured in plants certified ISO 9001:2000
  • International product support available through technical sales offices worldwide
  • Case hardened, helical steel gears are finished to AGMA 12 (ISO 6, DIN 6)
  • High capacity anti-friction bearings selected for extended life and trouble-free service
  • Gray cast iron housings (steel and spheroidal cast iron housings available as an option) with inspection ports for routine maintenance

Mounting Configuration

  • Multiple mounting options including parallel offset, right angle, foot mounted and shaft mounted
  • Horizontal or vertical mounting
  • Solid shaft, hollow shaft, shrink disc, and splined outputs
  • C-face, V-belt/piggyback, or scoop motor input

Optional Features

  • Backstops, base plates, coupling guards
  • Complete power transmission packages including motors, AC drives, reducers, base plates, and couplings
  • Easy adaptation of application-driven modifications to the standard reducer design
SEW Eurodrive Compact-Series Heavy Industrial Speed Reducers Distributors
Compact-Series Heavy Industrial Reducers

Standard Features:

  • Manufactured in plants certified ISO 9001:2000
  • International product support available through technical sales offices worldwide
  • Case hardened, helical steel gears are finished to AGMA 12 (ISO 6, DIN 6)
  • High capacity anti-friction bearings selected for extended life and trouble-free service
  • Gray cast iron housings; splash and pressure lube; modular construction
  • Fast delivery

Mounting Configuration

  • Multiple mounting options including co-axial, right angle, foot mounted and flange mounted
  • Horizontal or vertical mounting
  • Solid shaft or shrink disc, torque arm
  • C-face and V-belt motor mounts
  • Output mounting flanges

Optional Features

  • Backstops, base plates, coupling guards
  • Complete power transmission packages including motors, AC drives, reducers, base plates, and couplings
  • Easy adaptation of application-driven modifications to the standard reducer design
  • Multiple seal arrangements

Our SEW Eurodrive distributors warehouse in Boise, Idaho USA stocks some SEW Eurodrive products enabling us to further assist you in finding the correct SEW Eurodrive Speed Reducers in the USA, Canada and Mexico. Whether we have SEW Eurodrive Speed Reducers in stock in Boise, Idaho USA or need to ship direct from SEW Eurodrive to any USA cities; Clearwater Tech can get SEW Speed Reducers to you fast and save you some money! It will be very helpful if you have the SEW Eurodrive Speed Reducer part numbers ready, then our sales representatives can provide you with a pricing and availability quote for SEW Eurodrive Compact-Series Heavy Industrial Speed Reducers that you are looking for in seconds. If you do not have the part numbers for SEW Eurodrive M-Series Heavy Industrial, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Gear Reducer
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

Industrial
Helical
Helical Bevel
Clearwater Tech   © 2010 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY SITE INDEX