Introducing the DMS Manual Torque Screwdriver, a torque
screwdriver for controlled tightening of screws in the torque range of 0.5-1.7 Nm. The DMS manual
torque screwdriver includes a setting tool that insures the correct torque setting, an integral scale
for reading the torque value, and the handle provides an audible click upon reaching torque. The
giveaway includes one of our most popular interchangeable un-insulated bit for torque 1.1 Nm.
Bravo aluminum worm gear reducers are ideal for
manufacturers of commercial and industrial machinery designing compact and lightweight products.
These unique reducers weigh up to two-thirds less and are one-third smaller than comparable cast iron
designs. Bravo reducers are available with IEC motorized inputs and metric outputs, making them an
excellent replacement of popular worldwide brands.
The different MOVI-PLC basic and advanced controllers are available not only as control cards for the
MOVITRAC B and MOVIAXIS Inverters but also as compact controllers for
installation on a DIN rail. Both the control cards and the compact controllers are designed for universal control of all drives
from SEW-EURODRIVE. Engineering for MOVI-PLC control cards and MOVI-PLC compact controllers is identical. Compact controllers are
used whenever the option slots in the inverters are assigned or the logistic concept calls for separation of drive and motion
If you are looking for SEW Eurodrive MOVI-PLC Controllers, please call us on
(800) 894 - 0412 or email us at
we will do our best to help you find the SEW Eurodrive MOVI-PLC I/O Systems that you are looking for at the most competitive
prices possible. If you are searching for SEW Eurodrive PROFIsafe technical information (data-sheets) please use the
datasheets or product selection guide page links.
SEW Eurodrive MOVI-PLC I/O Systems
Perfectly matched components are the key to efficient and high-performance machine automation.
SEW-EURODRIVE offers a comprehensive product portfolio of all required components. From drive technology through control
platforms to the human machine interface (HMI), we provide a finely scaled range of matched components, now further enhanced and
rounded off with the MOVI-PLC I/O system. The MOVI-PLC I/O system expands the digital and analog interfaces of MOVI-PLC. Up to 32
modules per bus coupler can be connected via the system bus in IP20 enclosure.
SEW Eurodrive PROFIsafe
Drive engineering from SEW-EURODRIVE meets the challenge of avoiding industrial accidents while
maintaining trouble-free and economical system operation. Compliance with DIN EN 954-1 and EN 13849-1, intended to minimize the
risk posed to people by technical equipment, allows for the installation of system control that monitor the production process
instead of switching it off. The control systems applied must satisfy the relevant requirements regarding safety and performance
SEW Eurodrive DUV10A Diagnostic Units
SEW Eurodrive DUV10A diagnostic unit - drive diagnostics using vibration analysis for preventive
maintenance. From an economic point of view, preventive maintenance is becoming increasingly important in many systems. The
DUV10A diagnostic unit from SEW-EURODRIVE is the perfect sensor for simple and reliable monitoring of antifriction bearings.
The DUV10A diagnostic unit measures the structure-borne noise and uses this value to calculate the frequency spectrum. The unit
uses this frequency spectrum to constantly evaluate the condition of the antifriction bearings. The structure-born noise sensor
and evaluation electronics are fully integrated in the diagnostic unit.
SEW Eurodrive DUB10A Diagnostic Units
Preventive maintenance is becoming increasingly important, particularly as regards economic and
cost-effective system management. The DUB10A (Diagnostic Unit Brake) diagnostic unit from SEW-EURODRIVE is the ideal sensor for
monitoring the wear and functionality of the brake. The voltage-dependent signal can be evaluated by an SEW-EURODRIVE frequency
inverter or a higher-level controller. Two sensors allow you to monitor proper brake functioning and lining wear simultaneously
SEW-EURODRIVE DOP series drive operator panels provide new and additional drive technology functions
in, for example, recipe management, dual driver function, pass-through mode or an integrated Web server. The operator panels
thus enable optimum system visualization and operation. The same is true particularly in conjunction with higher-level
controllers. DOP operator panel functionality ranges from a 2 x 20 character text display to a 1024 x 768 pixel
The tried and tested SEW-EURODRIVE modular system is also used for the MOVIPRO field inverter. The
modular system for the MOVIPRO field inverter comprises a modular housing concept and various unit components that can be
combined as required. The housing concept is based on a modular structure with various predefined modules that are optimized
for use in the field. Various unit components are integrated into the modular housing depending on the requirements. Unit
components are, for example, optimized power sections, communication and energy supply components, local I/Os, and synchronous
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some of SEW Eurodrive
Products enabling us to further assist you in finding the correct SEW Eurodrive MOVI-PLC Controllers for your application in the
USA, Canada and Mexico. Whether we have SEW Eurodrive MOVI-PLC I/O Systems in stock in Boise, Idaho or need to ship direct SEW
Eurodrive to any USA cities; Clearwater Tech can get SEW Eurodrive Diagnostic Units to you fast and save money! It will be very
helpful if you have the SEW Eurodrive Tools part numbers ready, then our sales representatives can provide you with a pricing and
availability quote for SEW Eurodrive MOVI-PLC Controllers that you are looking for in seconds. If you do not have the part numbers
for SEW Eurodrive DOP Operator Panels, our application engineers will be able to help you figure out the part numbers and get the
price quote to you as soon as possible.