SSAC

Home   >   Products   >   SymCom   >   Current Sensors

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

ECS Series AC Current Sensor & Control

• Switch Selectable Overcurrent or Undercurrent Sensing/Control
• Onboard Adjust or Fixed Trip Point and Trip Delay
• Trip Points from 0.5 to 50 Amps, for Higher Trip Points Use an External CT
• Trip Delays to 50 Seconds
• 10 Amps @ 240VAC SPDT Isolated Contacts
• Solid State - Encapsulated
• 12 to 230 V in 5 Ranges
• 2.5 x 3.5 x 1.75 Inches (64 x 89 x 44.5 mm)
• 0.36 Inch (9.14 mm) Through Hole
• 0.25 Inch Male Quick Connect Terminals
• Popular Part Numbers are In Stock
• UL Recognized, CSA Certified, CE

If you are looking for SSAC Current Monitors, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the SSAC Control Relays that you are looking for at the most competitive prices possible. If you are searching for SSAC Current Indicators technical information (data-sheets) please use the datasheets or product selection guide page links.

TCS Series AC Current Interface for PLC or AC/DC Loads

• Direct Connection to PLC Digital Input Module
• 3 to 50VDC, 24 to 240VAC in 2 Ranges
• 1A Steady, 10A Inrush Solid State Output
• Trip Points - 2 to 45 Amperes (Fixed Units)
• 2 to 20 Amperes (Adjustable Units)
• For Higher Trip Points Use an External CT
• Normally Open or Closed Solid State Output
• Complete Isolation Between Sensed Current and Control Circuit
• Small Size, 2 x 2 x 1.75 Inches (50 x 50 x 44.5mm)
• Encapsulation Protects Circuitry Against Shock, Vibration, and Humidity
• UL Recognized, CSA Certified, CE

ECSW Series AC Window Current Sensor & Control

• Overcurrent & Undercurrent (Window Current) Sensing & Control
• Detects Locked Rotor, Loss of Load, Open Heater or Lamp Load, Etc.
• Trip Points from 0.5 to 50 Amps in 3 Ranges
• For Higher Trip Points, use an External CT
• Adjustable Trip Delays to 50 Seconds
• Current Sensor is Included - 3 LED Indicators
• 10 Amps SPDT Isolated Output Contacts
• 12 to 230 V in 5 Ranges
• Termination: 0.197 Inch (5 mm) Terminal Blocks
• 0.36 Inch (9.14 mm) Through Hole
• 3.5 x 2.5 x 1.75 Inches (88.9 x 63.5 x 44.5 mm)
• Solid State - Encapsulated
• UL Recognized, CSA Certified, CE

TCSA Series Loop Powered AC Current Transducer

• Output Directly Proportional to RMS AC Current Passing Through the Onboard Toroid
• Monitors 0 to 50 Amps In 4 Ranges
• Loop Powered from 10 to 30 V DC
• Linear Output from 4 to 20 mA
• Zero and Span Adjustments
• Complete Isolation Between Sensed Current and Control Circuit
• 0.25 Inch (6.35 mm) Male Quick Connect Terminals
• 2 x 2 x 1.75 Inches (50.8 x 50.8 x 44.5 mm)
• UL Recognized, CSA Certified, CE

DCSA Series Loop Powered AC Current Transducer

• Mounts on DIN 1 or DIN 3 Rail
• 0 to 50 Amps In 4 Ranges using LCSC10T12 Sensor
• Loop Powered from 10 to 30 V DC
• Linear Output from 4 to 20 mA
• Zero and Span Adjustments
• LCSC10T12 - Number of Turns 1000
• Burden - Less than or equal to 0.5 VA
• UL Recognized, CSA Certified, CE

LCS10T12 with LPM12 AC Current Indicator

• Low Cost Universal AC Current Indicator
• Sensing Range - 1 Pass = 5 to 50 Amps, for Higher Currents Use an External CT
• Sensing Range - 4 Passes = 1.3 to 12.5 Amps
• Self Powered Easy to Connect
• Indicator Can Be Up to 500 Ft. From Sensor
• LPM12 is a Red LED in a Mounting Bezel
• LPMG12 is a Green LED in a Mounting Bezel
• LCS10T12 - 1.5 x 0.98 x 0.46 Inches (38 x 25 x 12 mm)
• 0.36 inch (9.14 mm) Through Hole
• LPM12 - 0.75 x 0.28 Inches (19.81 x 7.11 mm)
• UL Recognized and CSA Certified

Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some SymCom products enabling us to further assist you in finding the correct ABB SSAC current sensor in the USA, Canada and Mexico. Whether we have SSAC current control in stock in Boise, Idaho USA or need to ship direct from SymCom to any USA cities; Clearwater Tech can get entrelec SSAC over / under current sensing products to you fast and save you some money! It will be very helpful if you have the SSAC AC current interface part numbers ready, then our sales representatives can provide you with a pricing and availability quote for SSAC AC current indicator that you are looking for in seconds. If you do not have the part numbers for ABB current transducers, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.