Octal Plug-in
Surface Mounting
Low Level Cutoff
LLC1 Open Board
March 28, 2010

TURCK Sensors

The MK91-12-R will start a pump or open a fill valve when the liquid drops below the MIN level probe and will remain on until the MAX level probe is reached. The relay then de-energizes and stays off until the MIN level is reached. The pump or valve does not cycle constantly, as would be the case if only one sensor were used.
Conductive Level Probes

Banner Sensors

The U-GAGE QT50U sensor may be programmed for either a positive or a negative output slope, depending on which conditions are taught for the Min and Max Analog limits. If the Min Analog limit is the Near Window setting and the Max Analog limit is the Far Window setting, then the slope will be positive. If the opposite is true, then the slope will be negative.
DIP Switch Selectable Functions

SSAC

Loading

Home   >   Products   >   SymCom   >   Liquid Level Controls

SymCom SSAC

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

ABB SSAC LLC1 Series Single Probe Liquid Level Control Distributor
LLC1 Series

LLC1 Series Open PC Single Level Control

  • Single Probe Liquid Level Control for Conductive Liquids
  • Isolated AC Voltage on the Probes
  • Adjustable or Fixed Sensing up to 250,000 Ohms
  • Time Delay Prevents Rapid Cycling
  • 0.25 inch (6.35 mm) Male Quick Connect Terminals
  • 24 or 120 or 230 VAC Models are Available
  • 10 Amps SPDT Isolated & SPST Non-isolated Contacts
  • Clear Coated Electronics
  • 0.50" (12.7 mm) Nylon Standoffs, #6 Screws
  • 3.5 x 2.75 x 2.00 Inches (88.9 x 69.9 x 50.8 mm)
  • UL Recognized, CSA Certified, CE

If you are looking for SSAC Liquid Level Controls, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the SSAC Low Level Cutoff Control that you are looking for at the most competitive prices possible. If you are searching for SSAC Octal Plug-in Control technical information (data-sheets) please use the datasheets or product selection guide page links.

SymCom SSAC LLC2 Series Dual Probe Liquid Level Control Distributors
LLC2 Series

LLC2 Series Open PC Dual Level Control

  • Dual Probe Liquid Level Control for Conductive Liquids
  • Isolated AC Voltage on the Probes
  • Adjustable or Fixed Sensing up to 100,000 Ohms
  • Terminal Block or Quick Connect Terminals
  • 24, 120, or 230 VAC Models are Available
  • 10 Amps SPDT Isolated Contacts
  • Clear Coated Electronics
  • 0.50" (12.7 mm) Nylon Standoffs, #6 Screws
  • 3 x 4 x 1.88 Inches (76 x 102 x 48 mm)
  • UL Recognized, CSA Certified, CE
entrelec SSAC LLC4 Series Single Probe Liquid Level Control Distributor
LLC4 Series

LLC4 Series Octal Plug-in Single Level Control

  • Single Probe Level Control for Conductive Liquids
  • Adjustable or Fixed Sensing up to 250,00 Ohms
  • 24, 120 or 230VAC Models are Available
  • Isolated AC Voltage on the Probes
  • 4 Amps Resistive SPDT Isolated Contacts
  • Time Delay Prevents Rapid Cycling
  • Moisture Protected Circuitry
  • 1.78 x 2.39 x 2.9 Inches (45.2 x 60.7 x 73.7 mm)
  • UL Recognized, CSA Certified, CE
ABB SSAC LLC5 Series Dual Probe Liquid Level Control Distributors
LLC5 Series

LLC5 Series Octal Plug-in Dual Level Control

  • Dual Probe Level Control for Conductive Liquids
  • Onboard Knob or Fixed Sensing up to 100,000 Ohms
  • Octal Plug-In Base (see Accessory Sockets)
  • LED Indicator Reduces Adjustment Time
  • 24, 120, or 230 VAC Models are Available
  • 5 Amps SPDT Isolated Contacts
  • 1.78 x 2.39 x 3.25 Inches (45 x 61 x 83 mm)
  • UL Recognized and CSA Certified, CE
SymCom SSAC LLC6 Series Low Level Cutoff Liquid Level Control Distributor
LLC6 Series

LLC6 Liquid Level Control - Low Level Cutoff

  • Designed for Low Level Cutoff Protection
  • Energized on Wet Probe
  • Fixed Time Delay of 1 to 60 seconds
  • Sense Resistance of 5k to 250k Ohms
  • 24, 120, or 230 V AC Input Voltages Available
  • 10 A, SPDT Relay Contacts
  • UL Recognized, CSA Certified, CE
entrelec SSAC LLC8 Series Low Level Cutoff Liquid Level Control Distributors
LLC8 Series

LLC8 Liquid Level Control - Low Level Cutoff

  • Designed for Low Level Cutoff Protection
  • Energized on Wet Probe
  • Fixed Time Delay of 1 to 60 seconds
  • Fixed Sense Resistance of 5k to 250k Ohms
  • 24, 120, or 230 V AC Input Voltages Available
  • Isolated 10 A, SPDT Relay Contacts
  • UL Recognized, CSA Certified, CE
ABB SSAC ARP Series Motor Alternating Duplexing Relay Distributor
ARP Series

ARP Series Motor Alternating or Duplexing Relay

  • Switch Selectable Alternating or Electronically Locked Operation
  • Transfers when Control Switch Opens
  • Selects Load A on Application of Power
  • Octal or 11 Pin Plug-in Base (see accessory sockets)
  • 24 or 120 or 230 VAC Models are Available
  • 10 Amps SPDT or DPDT Contacts
  • 1.78 x 2.39 x 3.2 Inches (45 x 61 x 81 mm)
  • Popular Part Numbers are In Stock
  • UL Recognized, CSA Certified, CE

Our industrial automation supplies distributors warehouse in Boise, Idaho USA stocks some ABB entrelec products enabling us to further assist you in finding the correct LLC1 series single probe in the USA, Canada and Mexico. Whether we have LLC2 series dual probes in stock in Boise, Idaho USA or need to ship direct from SSAC to any USA cities; Clearwater Tech can get LLC4 series single probe to you fast and save you some money! It will be very helpful if you have the LLC5 series dual probes part numbers ready, then our sales representatives can provide you with a pricing and availability quote for LLC6 series low level cutoff that you are looking for in seconds. If you do not have the part numbers for SSAC LLC8 series low cost single probe conductive liquid level control, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

LLC2
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

LLC4
LLC5
LLC6
Clearwater Tech   © 2011 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY SITE INDEX