Clearwater Tech Logo


Home   >   Products   >   Littelfuse   >   Solid State & Alternating   >   Relays


SSAC's family of alternating relays balance the run time of pumps in dual pump applications. When wired for duplex operation, pumps have to work half of the time, increasing the longevity of both pumps.

SSAC ARP Series Alternating Relays Distributors

ARP Series

The ARP Series is used in systems where equal run time for two motors is desirable. The selector switch allows selection of alternation of either load for continuous operation. LED's indicate the status of the output relay. This versatile series may be front panel mounted (BZ1 accessory required) or 35 mm DIN rail mounted with an accessory socket.

Alternating: When the rotary switch is in the "alternate" position, alternating operation of Load A and Load B occurs upon the opening of the control switch S1. To terminate alternating operation and cause only the selected load to operate, rotate the switch to position "A" to lock Load A or position "B" to lock Load B. The LEDs indicate the status of the internal relay and which load is selected to operate.

If you are looking for SSAC Relays, please call us on (800) 894 - 0412 or email us at we will do our best to help you find the SymCom ARP series alternating relay that you are looking for at the most competitive prices possible. If you are searching for SSAC SIR1 series solid state relays technical information (data-sheets) please use the datasheets or product selection guide page links.

SSAC SIR1 & SIR2 Series Isolated Solid-State Relay Distributor

SIR1 & SIR2 Series

SSAC's solid state relays are often used in highly repetitive automation applications. They allow low current carrying switches or 1/0 modules to switch high power resistive, incandescent, or inductive loads.

Designed for industrial applications requiring rugged reliable operation. Provides an optically isolated, high capacity, solid-state output, with power switching capability up to 20A steady state, 200A inrush.

Zero voltage switching SIR2 extends the life of an incandescent lamp up to 10 times. Random switching SIR1 is ideal for inductive loads.

When fully insulated female terminals are used on the connection wires, the system meets the requirements for touch-proof connections.

SSAC SLR Series Solid-State Non-Isolated Relays Distributors

SLR Series

The SLR Series has no isolation between the control switch input and the solid-state output. Select the SLR for applications where the control switch is the same voltage source as the load. Provides the noiseless, reliability and long life of a solid-state relay, without the cost of isolation circuitry.

Zero voltage switching SLR2 can extend the life of an incandescent lamp up to 10 times its normal life. Random switching SLR1 is normally used for inductive loads. When fully insulated female terminals are used on the connection wires, the system meets the requirements for touch-proof connections.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some SymCom products enabling us to further assist you in finding the correct SSAC SIR2 series isolated relay in the USA, Canada and Mexico. Whether we have ABB SLR1 series solid state relay in stock in Boise, Idaho USA or need to ship direct from Littelfuse to any USA cities; Clearwater Tech can get SSAC SLR2 series non-isolated relay to you fast and save you some money! It will be very helpful if you have the ABB ARP series alternating relays part numbers ready, then our sales representatives can provide you with a pricing and availability quote for SymCom SLR series solid state relays that you are looking for in seconds. If you do not have the part numbers for SSAC SIR1 & SIR2 series solid state relays, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check

Part No:

Search Tips
Can't find a part number?
E-mail Us!

Red Lion Sensors

The Compact Self-Contained and powerful retroreflective, proximity (diffuse) and opposed beam pair photo-electric sensors provide application flexibility in counting, positioning and object detection. All units are interchangeable with conventional 18 mm threaded barrel-type photo-electrics and inductive proximity sensors. Their small 2-1/8" x 1-1/4" x 1/2" size, in addition to various mounting options, greatly increases

NK Technologies Switches

NK Technologies AS3 series current sensing switches provide the same dependable indication of status offered by the AS1, but with the added benefit of increased setpoint accuracy. A choice of three, jumper-selectable input ranges allows the AS3 to be tailored to an application, providing more precise control through improved setpoint resolution. Self-powering, isolated solid-state outputs, 1-6 A, 6-40 A and 40-200 A input ranges,