Clearwater Tech Logo


Home   >   Products   >   Littelfuse   >   Obstruction   >   Lighting Controls


SSAC's flashers for incandescent or LED lighting are used for both alternating and non-alternating applications in the signaling, communications, and advertising industries. FAA approved versions for obstruction lighting control are available. All products are encapsulated to protect against vibration and moisture which makes them ideal for outdoor use. Due to the solid-state design, they have no moving parts to arc, wear, or fail (100 million operations are typical).

SSAC FS & FA Series Beacon Tower Flashers Distributors

FS & FA Series

B-KON Flashers have proven their reliability through years of use on communication towers, smoke stacks, cooling towers, tall buildings, bridges and utility towers. The highest quality components are encapsulated in a rugged plastic housing with a molded-in heat transfer plate. The flash rate, ratio, and fail-safe design meet FAA regulations. Zero voltage switching can increase lamp life up to ten times. The FS155-30RF & FS165-30RF include superior RF filtering circuitry for use in high RF installations; including AM hot towers.

If you are looking for SSAC Obstruction Lighting Controls, please call us on (800) 894 - 0412 or email us at we will do our best to help you find the SymCom FS series flasher that you are looking for at the most competitive prices possible. If you are searching for SSAC FA series flashers technical information (data-sheets) please use the datasheets or product selection guide page links.

SSAC FB120A/FB230A Flasher & Incandescent Beacon Alarm Relay Distributor

FB120A/FB230A Series

The FB120A and FB230A are used to monitor the operation of one two-lamp incandescent beacon and one beacon flasher (or auxiliary module).

The flasher and lamps are monitored by sensing the flow of current in the circuit. If the lamp(s) or the flasher fail to operate properly, a solid-state output and an isolated SPDT relay energize.

When connected to a site monitoring system, this unit provides the remote beacon monitoring protection required by the FAA/FCC. On a multiple beacon structure, one unit is required for each two-lamp incandescent beacon (one unit per beacon for LED beacons).

SSAC FB9L Universal Lamp Alarm Relays Distributors

FB9L Series

The FB series is a universal lamp alarm relay designed to sense the failure of flashing LED beacon lamps. It will monitor the operation of one to eight beacons connected to a single flasher and/or auxiliary modules and the operation of the flasher.

The FB Series output relay energizes when one or more lamps fail. All monitored lamps must be the same wattage and voltage. The 0.5A solid-state output energizes when a flasher failure is sensed.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho USA stocks some SymCom products enabling us to further assist you in finding the correct SSAC FB120A flasher in the USA, Canada and Mexico. Whether we have ABB FB230A incandescent beacon alarm relay in stock in Boise, Idaho USA or need to ship direct from Littelfuse to any USA cities; Clearwater Tech can get SSAC FB9L universal lamp alarm relay to you fast and save you some money! It will be very helpful if you have the ABB universal lamp alarm relays part numbers ready, then our sales representatives can provide you with a pricing and availability quote for SymCom obstruction lighting controls that you are looking for in seconds. If you do not have the part numbers for SSAC incandescent beacon alarm relays, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check

Part No:

Search Tips
Can't find a part number?
E-mail Us!

Red Lion Converters

The Trip Frequency can be set to any value from 0.1 Hz to 25 KHz. The IFMR can be set to trip on overspeed, or underspeed (including zero speed). Offset and hysteresis values can be incorporated into the trip setting to eliminate output chatter. LED indicators for both the Input signal and the Relay status are provided. Two separate input connections for external push-buttons are also provided. One external input overrides

WEG Soft Starters

With Adequate Adjustments of the variables, the torque produced is adjusted to the needs of the load, so the required current is going to be as low as possible for the starting procedure. WEG Soft-Starter SSW-06 series, micro processed and full digital, are products with state-of-the-art technology and have been produced to ensure the best starting and stopping performance of induction motors, presenting themselves as a complete