Clearwater Tech Logo
Loading
Home | Contact Us
(844) 331-9378

Panasonic/SUNX

Home   >   Products   >   Panasonic   >   Area Sensors

SUNX Static Ionizers

(844) 331-9378       (888) 723-4773 (Fax)
info@clrwtr.com

NA1-11 & NA1-11-PN Series

The NA1-11 is an area sensor that utilizes a unique cross-beam detection method to accurately detect small and thin objects. With a wide 100mm sensing height, as well as a 1m length detection distance, this sensor can be used in a wide range of possible applications. The sensor thickness is a mere 10mm, providing simple mounting due to the lack of space necessary for integration. A convenient high visibility, 55mm indicator is integrated on both the emitter and receiver. One transistor output is provided (available in PNP or NPN).

Slim objects can be detected by the cross-beam scanning system. A minimum sensing object size of ø13.5 mm ø 0.531 in can be detected by an emitting and receiving element pitch of 10 mm 0.394 in. It is extremely slim, being just 10 mm 0.394 in thick. Further, it can be mounted in a narrow space as you can select from two cable orientation directions.

SUNX NA1-11 Series Small/Slim Object Detection Area Sensors Distributors

NA1-11 & NA1-11-PN Series

If you are looking for SUNX Area Sensors, please call us on (844) 331-9378 or email us at info@clrwtr.com we will do our best to help you find the SUNX Slim Body Area Sensor that you are looking for at the most competitive prices possible. If you are searching for SUNX Picking Sensor technical information (data-sheets) please use the datasheets or product selection guide page links.

Though being extremely slim, it has a wide sensing area of 1 m 3.281 ft length and 100 mm 3.937 in width. It is most suitable for object detection on a wide assembly line, or for detecting the dropping of, or incursion by, small objects whose travel path is uncertain. It conforms to the EMC Directive and the UL Recognition. Moreover, PNP output type, which is much in demand in Europe, is also available.

Wiring is saved and made simple as no synchronization wire is required between the emitter and the receiver. A clearly visible large indicator, having a 55 mm 2.165 in width, is incorporated on both the emitter and the receiver. Further, if the sensing output is directly connected to the large indicator input, the indicator can be conveniently used as a large operation indicator. Moreover, its operation is selectable between lighting or blinking.

NA1-PK5 & NA1-5 Series

The NA1-5/PK5 series of bin picking sensors is perfect for preventing errors due to incorrect part picking during assembly or packaging operations. Human error is reduced by incorporating a large, bright LED indicator bar that can be configured to illuminate or even blink to show the operator which bin they are supposed to use. Long operation is possible at up to 1.2m; and at only 10mm thick, installation will not obstruct picking operations.

Also, mounting up to two sets of sensors side by side is possible without any mutual interference. This is useful for multi-tier shelving units. Lastly, sensor protection brackets are available to eliminate damage due to tools or other objects.

SUNX NA1-PK5 & NA1-5 Series Ultra-Slim Body Picking Sensor Distributor
NA1-PK5 & NA1-5 Series

Space saving is now possible. The ultra-thin design does not obstruct picking operation. Bright, easy-to-see job indicators, 55 mm 2.165 in in length, have been incorporated into both the emitter and the receiver. This sensor is optimal for picking. With the NA1-PK5, we have enhanced visibility even further by using 8 orange LED lights. Its long sensing range of 3 m 9.843 ft is sufficient for confirming access to a parts shelf.

Sensor units can now be set to different light emission frequencies in order to prevent mutual interference. Two units can now be operated in a side-by-side configuration without interference, for problem-free detection over wider areas. The job indicator operation can be selected as either continuous lighting or blinking. Either of the two different detection operations may be selected in order to suit the particular application. Sensor units can be set to detect the interruption of 1 or more beam channels, or can be set to detect only the interruption of 2 or more beam channels.

NA1-PK3 Series

The NA1-PK3 series of bin picking sensors is perfect for preventing errors due to incorrect part picking during assembly or packaging operations. Human error is reduced by incorporating a large, bright LED indicator bar that can be configured to illuminate or even blink to show the operator which bin they are supposed to use. At only 10mm thick and 70mm tall, installation is possible in even the smallest bins.

Also, mounting up to three sets of sensors side by side in the same vertical plane is possible without any mutual interference. This is useful for multi-tier shelving units. Lastly, sensor protection brackets are available to eliminate damage due to tools or other objects. The ultra compact body incorporates a job indicator approx. 50 mm 1.969 in tall. Due to its brightness and high visibility, it is now possible to check sensor operation even from a distance.

SUNX NA1-PK3 Series Compact Size Picking Sensors Distributors

NA1-PK3 Series

Ultra compact size: W24 H70 D8 mm W0.945 H2.756 D0.315 in. Can even be mounted within the small space constraints of parts containers. Output operation can be switched to suit the desired application. Sensor protection brackets are now available (optional), to protect sensors from damage due to tools and other objects. The protection brackets have a black coating, which enhances the visual effectiveness of the job indicator.

Synchronization wires are not required, due to the utilization of a synchronized scanning system that results in a reduction of wiring man-hours. In addition, the sensors can be switched among three different emission frequencies, allowing up to three sets of sensors to be installed closely together in the same vertical plane, without causing mutual interference. Even when installed in multistage shelving, malfunctions due to mutual interference will not occur. (When mounted horizontally, a maximum of two sensor sets may be used side-byside, without interference.)

The sensor's beam axis is directly in line with the mounting holes, making sensor alignment easier. Mounting can be performed simply by using M4 nuts. The cabling can be oriented in either of the two different directions: downward or sideways, thus permitting a flexible layout, in accordance with the sensor's mounting position.

NA2-N Series

The NA2-N series of area sensors provides a general-purpose detection solution with a wide range of sensing heights (140mm - 540mm). They have a 20mm beam pitch and offer a sensing range of up to 5m. With an ultra-slim body of just 13mm, mounting has been greatly simplified. A large 102mm indicator is integrated into both the emitter and receiver for high visibility of output status. Furthermore, the emission frequency can be modified to prevent mutual interference when two sensors are mounted in close proximity with each other. One transistor output is provided (available in PNP or NPN).

The slim-bodied NA2-N series fits right in your equipment, since it is only 13 mm 0.512 in thick and 30 mm 1.181 in wide. It does not get in the way of your access to the machine.

SUNX NA2-N Series General Purpose & Slim Body Area Sensor Distributor

NA2-N Series

The thin resin case type area sensor has a sensing hight of 540 mm 21.260 in (28 beam channels), a beam pitch of 20 mm 0.787 in (minimum sensing object of 30 mm 1.181 in), and sensing range of 5 m 16.404 ft to meet a variety of needs. In addition to the conventional 12, 16, and 20 beam channel types, this new lineup includes 8, 24, and 28 beam channel types. A wide model variation is provided with sensing heights from 540 mm 21.260 in (28 beam channels) to 140 mm 5.512 in (8 beam channels).

It conforms to the EMC Directive and obtains the UL Recognition. Products that has obtained the Korea's S-mark certification are available as well. Moreover, PNP output type which is much in demand in Europe is also available. Both the receiver and the emitter feature job indicators, 102 mm 4.016 in wide, with red bright LEDs. When the sensing output and the job indicator input are connected, the job indicator can be used as a large operation indicator.

By setting different emission frequencies for two sensors, mutual interference can be prevented. There is no problem even when the sensors are parallel installed for wide detections area coverage. Moreover, the set frequencies can be identified by how many times the emitting indicators is light up. The operation of the job indicator can be selected using the operation mode selection switch. Beam output can be stopped via the input of an external signal. This is an useful test input (emission halt) function when beginning operation.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some SUNX sensor products enabling us to further assist you in finding the correct NA2-N sensor for your application in the USA, Canada and Mexico. Whether we have NA1-11 sensor in stock in Boise, Idaho or need to ship direct from Matsushita Electric Works to any USA cities ; Clearwater Tech can get NA1-5/PK5 sensor to you fast and save money! It will be very helpful if you have the NA1-PK3 sensor part numbers ready, then our sales representatives can provide you with a pricing and availability quote for NA2-N sensor that you are looking for in seconds. If you do not have the part numbers for Panasonic picking sensor, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us.

TURCK Limit Value Monitor

The IM43-14-SRi and IM43-13-SR limit value monitors are single-channel devices and alternately monitor measuring current of 0/4-20 mA or measuring voltages of 0/2-10 V. The three limit values are set via the front panel teach button. In addition, a voltage of approx. 18 V (at 35 mA max.) is provided, which can be used to power transmitters or sensors. The output mode is jumper programmable at terminals 5-8.

Datalogic Sensors

A Timing Function Version with both the SPDT relay or the bipolar transistor NPN/PNP open collector outputs is offered. The terminal block connection simplifies and speeds-up the installation procedure, whereas the heavy-duty plastic housing guarantees excellent resistance under harsh use conditions. The S300 PA series of advanced MAXI photoelectric sensors represents the most suitable solution for standard applications thanks to it's