May 08, 2008
CONTRINEX Sensors
CONTRINEX
series 1000 photoelectric proximity switch features a great variety of sizes and functions in widely used standardized
cylindrical housings (smooth and threaded types). Series 1000 photoelectric proximity sensors will be available in the
following sizes: 4 mm, M5, 6.5 mm, M8, M12 and M18.
Photoelectric Sensors
|
IDEC Switches
From miniature IDEC IZUMI
pilot lights and switches that mount into 8mm panel cut outs through full size industrial switches that mount into 30mm cutouts,
IDEC has a switch or indicator for almost any application. IDEC is very excited to introduce the XA (16mm) and XW (22mm) series
Emergency Stop (E-Stop) buttons.
IDEC Switches
|
|
SUNX
Home > Products >
SUNX > Measurement Sensors
|
 |
(800) 894-0412 (208) 368-0415 (Fax) info@clrwtr.com |
 SUNX HL-C2 Series Laser Displacement Switches |
With the accumulated know-how in measurement technology together with the newest digital technology,
SUNX has developed the industry's cutting edge HL-C2 series to attend to every need from short to mid sensing range. Small
beam spot works best for minuscule sensing objects such as connector leg pins or limited measuring positions. Linear beam
spot is best suited for metal's cutting surface or surface that has patterns which may cause diffuse reflection. Selecting a
suitable sensor may be difficult depending on the surface of the object. Even under such conditions, with just one sensor head
setup mode can be selected while assuring stable sensing operation.
|
|
If you are looking for SUNX Measurement Sensors, please call us on
(800) 894 - 0412 or email us at
info@clrwtr.com we
will do our best to help you find the SUNX Laser Displacement Sensors that you are looking for at the lowest prices possible. If you
are searching for SUNX Collimated-Beam Sensor technical information (data-sheets) please use the
Sunx Data Sheets or
Product Selection Guide page links.
|
 SUNX HL-C1 Series Laser Displacement Switches |
SUNX HL-C1 series of laser displacement sensors provides a high-speed, stable measurement solution for a
wide variety of applications. Its compact design significantly reduces the needed installation space, all while including
capability for two sensor heads, and an integrated RS-232C port for communication with a
PC. An available touch-screen console unit provides a convenient panel
mount solution that allows for full control of the controller's settings. Because two heads can be used at once, thickness
measurements have never been easier. The HL-C1 series also incorporates many useful functions, including hold functions,
calculation functions, filter functions, and a hysteresis setting function that facilitate simple usage across numerous
applications.
|
 SUNX HL-T1 Series Laser Collimated Beam Switches |
SUNX HL-T1 series of laser collimated beam sensors combines extremely compact sensor heads with a
high-functionality intelligent controller. Three sensor heads are available from the long-range, small beam width
HL-T1001(A/F) to the wide beam HL-T1010(A/F). All are available in a class 1 or FDA approved class 2 laser. With a 4-micron
resolution and an 8-micron minimum object diameter, the HL-T1 series offers incredibly high precision for positioning and
measurement applications. An optional side-view attachment provides ease and simplicity in mounting the sensor head.
SUNX HL-T1 controller features an easy to see dual Digital Display with a convenient four-key layout for
simple control. Three types of teaching functions have been integrated including: single level, two level and fully automatic
teaching. Using the optional HL-AC1-CL calculation unit, two sensors can be connected together to enable addition or
subtraction functions. This is perfect for applications such as sheet width measurement. The analog output is selectable
between current or voltage and HI/LO/GO outputs are integrated as well (available as PNP or NPN).
|
 SUNX GP-X Series Inductive Displacement Switches |
SUNX GP-X series of inductive displacement sensors provides an ultra high-speed, accurate measurement
solution for all of your metallic applications. A 0.02% F.S. resolution and 0.3% F.S. linearity allow for the sensor to
distinguish even the smallest of changes. This sensor is also usable on high-speed manufacturing lines due to its ultra
high-speed 25 microsecond sampling speed. Six types of sensor heads are available from the ultra compact GP-X3SE (3.8mm
diameter) to the long sensing range GP-X12ML (5mm sensing range). Also, all sensor heads are IP67g rated, so they are
suitable for use in the most demanding environments. A one-touch connector simplifies sensor hook-up and cable extensions are
available for up to a 10m total length.
|
 SUNX LH-50 Series Optical Displacement Switches |
SUNX LH-50 series of LED displacement sensors provide a high precision alternative to laser based
systems. A safe, red LED light source is used to achieve a resolution as high as 2 micrometers with a beam spot of 1.6mm or
less (LH-54). The three available sensor heads are compact and lightweight, allowing for easy installation in tight areas.
Three controller types are available for optimum coverage of applications. The general purpose, LH-CL6(P), allows for simple
and basic functionality while the high-function type, LH-CS6(P) offers advanced control using built-in functions. The LH-CD6(P)
expands on this control by adding support for a second sensor head, making it simple to perform actions such as thickness
measurements.
|
 SUNX LM10 Series Micro Laser Displacement Switches |
SUNX LM10 series of Laser Displacement Sensors
provides a low cost displacement solution while maintaining high-precision. With up to a 1 micron resolution and a +/- 0.2%
F.S. linearity, the LM10 does not give up ability for price. Class 1 or 2 laser diodes are available and in addition to one
analog output (voltage or current), a discrete comparator is built-in as well (single or window). Nine sensor heads are
available from the high-resolution ANR1250 (1 micron) to the long range ANR1226 (250 +/- 150mm measuring range).
|
 SUNX GP-A Series Inductive Displacement Switches |
SUNX The GP-A series of inductive displacement sensors provide accurate measurement of metallic object
displacement with a resolution of 0.04% F.S and a linearity of 0.5% F.S. Both the amplifier and the sensor heads also exhibit
excellent temperature characteristics as well. These features coupled with the IP67g rating of the sensor heads enable
incredibly stable performance in the most demanding environments. Five types of sensor heads are available for integration in a
wide array of applications.
The compact amplifier is equipped with several advanced features such as zero-adjustment, shift adjustment,
and span adjustment functions. This allows for simple integration with your application. The amplifier is also equipped with
convenient indicators to alert the user of faults or if the sensor is out of range. One analog output is provided and is
available in 1-5V or 4-20mA ranges.
|
 SUNX LA-300 Series Beam Switches |
SUNX LA-300 series of LED collimated beam sensors provides a compact, safe alternative to laser diode
types. The compact size of the sensor heads allows for versatile placement in your machine. Two sensor heads are available with
a maximum sensing range of 500mm with a 10mm wide beam (LA-310). Beam alignment is simplified by incorporating a 3-stage
stability indicator along with a target label for accurate positioning of the incident light beam. Two comparative outputs
(NPN or PNP) and one analog output (1 to 5V) are integrated for simple configuration. Also, shift and span adjustments of the
analog output are possible with the controller.
|
 SUNX LA Series Beam Switches |
SUNX LA series of laser collimated beam sensors is a safe and precise solution to your detection needs.
Utilizing an FDA approved class 1 laser diode, extra protective measures are not required. The wide sensing area of 15mm x
500mm, coupled with a 10 micron repeatability, provides ample precision and range for most positioning or detecting
applications. Versatile mounting options are also available, such as the side view attachment for tight mounting conditions.
Laser alignment has been simplified by using four LED indicators to determine correct axial positioning. The LA-C1 controller
offers a simple digital display along with an auto-reference function and two operation modes: Hystersis mode and window
comparator mode.
|
 SUNX LD Series Laser Switches |
SUNX LD series of laser edge detection sensors offers high-accuracy measurement using a red semiconductor
laser and CCD receiver combination. Both are mounted to the same body ensuring accurate alignment out of the box. The laser
element is available in either a class 1 or 2 type. Stable sensing over a long period of time has been achieved by integrating a
shade correction function that compensates for any receiver sensitivity variation and generates a uniform sensitivity
distribution. Four sensing methods are available including edge and width measurements in either light or dark mode.
|
Our SUNX Photoelectric Sensor Distributors warehouse in
Boise, Idaho stocks some SUNX Sensor products (SUNX Measurement Sensors HL-C2 HL-C1 LM10 LD Laser Displacement HL-T1 LA-300 LA
Collimated Beam GP-X GP-A Inductive LH-50 Optical Sensor Distributors) enabling us to further assist you in finding the correct
Panasonic SUNX Measurement Sensors for your application in the USA (Alabama Alaska Arizona Arkansas California Colorado Connecticut Delaware
Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota
Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma
Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington Washington D.C. West
Virginia Wisconsin Wyoming), Canada and Mexico.
Whether we have SUNX Measurement Sensors in stock in Boise, Idaho or need to ship direct from Panasonic
(Matsushita) to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San
Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth
Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta
Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati
Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield
Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort
Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta
Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem);
www.clrwtr.com can get SUNX Laser Displacement Sensors to you fast!
It will be very helpful if you have the SUNX Measurement Sensor part numbers ready, then our sales
representatives can provide you with a pricing and availability quote for SUNX Collimated Beam Sensors that you are looking for in
seconds. If you do not have the part numbers for SUNX Inductive Displacement Sensor, our application engineers will be able to help you figure out the
part numbers and get the price quote to you as soon as possible.
|
|
|
 |
|
| Part Number: |
|
|
Can't find a part number?
E-mail Us! |
|
|