SUNX Special Usage Sensors TH-11CS TH-12CS US-N300 NA1-11 SF1-F GD LA-T Detection Switches Distributors
SUNX Special Usage Sensors TH-11CS TH-12CS US-N300 NA1-11 SF1-F GD LA-T Detection Switches Distributors
SUNX Special Usage Sensors TH-11CS TH-12CS US-N300 NA1-11 SF1-F GD LA-T Detection Switches Distributors
SUNX Special Usage Sensors TH-11CS TH-12CS US-N300 NA1-11 SF1-F GD LA-T Detection Switches Distributors

Datalogic Sensors

A 4-Digit Display visualises the distance, as well as all the parameters that can be set with the three push-buttons. The S80 series, in the compact sturdy metal housing, offers innovative class 2 laser distance sensors with time of flight measurement. this technology, based on the measurement of the time between the emission and receipt of the laser light pulses, effects accurate distance detection. The S80-Y0 and S80-YL0 sensors

Toshiba Relays

When Motor Protection needs are not quite as elaborate, this relay combines reliable protection against overloads and single phasing with a simple, easily adjustable design. As a motor overload protection relay, the 2E is adjustable from Class 3 through Class 40 to provide optimum protection and to accommodate reduced voltage starting and high inertia loads. Ground fault and phase reversal modules are available.

SUNX

Home   >   Products   >   Panasonic   >   Special Usage Sensors

SUNX Particular Use Sensors

(844) 331-9378       (888) 723-4773 (Fax)
info@clrwtr.com

SUNX TH-11CS TH-12CS Series Hot Melt Glue Detectors Distributors
TH-11CS/TH-12CS Series

SUNX TH series is a quick, reliable, non-contact hot melt adhesive detector. Two sensor heads are available: the miniature sized spot type and the long range sensing type. The long-range type has a wide field of view (30mm) that allows for variations in positioning. A built-in indicator on the sensor head provides quick confirmation of the output status at a glance. Also, with a 1ms response speed, the TH series is suitable for use on high-speed production lines.

The sensor controller offers full automatic threshold teaching for easy inline setup. Also, three built-in functions help simplify use by offering preset methods to determine basic presence of adhesive, quantity of adhesive, and length of adhesive applied. An eight-channel registration bank is also integrated into the controller for convenient storage of multiple configurations.

If you are looking for SUNX Object Detection Sensors, please call us on (844) 331-9378 or email us at info@clrwtr.com we will do our best to help you find the SUNX Transparent Object Detection Sensor that you are looking for at the most competitive prices possible. If you are searching for SUNX Slim Object Detection Sensors technical information (data-sheets) please use the datasheets or product selection guide page links.

SUNX US-N300 Series Thru-beam Type Ultrasonic Sensor Distributor
US-N300 Series

US-N300 Thrubeam Ultrasonic Sensor for Dirty/Dusty Sensing Environments

The US-N300 is a thrubeam ultrasonic sensor that is suitable for the detection of transparent objects.

Because this sensor makes its judgment sonically, it does not have the same difficulties in detection as with light based systems. Also, at only 16mm thick, the US-N300 has a small mounting footprint.

SUNX SF1-F Series 20 mm 0.787in Beam Pitch Individual Beam Output Area Sensor Distributor
SF1-F Series

Using a separate control board, each beam channel can be output individually. This is particularly useful for a variety of applications such as discriminating the size of traveling objects, or for sensing their position. A narrow 20 mm (0.787 in) beam pitch offers high sensing performance. It is able to detect a minimum 30 mm (1.181 in) diameter opaque object. SUNX SF1-F series is reduced in volume with only 40% the cross-sectional area of a conventional model.

There are eight types of sensors having a sensing height from 140 mm (5.512 in) (8 beam channels) to 1,260 mm (49.606 in) (64 beam channels). It also has a long sensing range of 7 m (22.966 ft). Channel-check function: When the channel-check input is connected to 0V, the emission of each channel is stopped successively, one at a time. At this time, the corresponding receiver channels generate an output. This is extremely useful for a start-up check. Interference prevention function: It prevents interference between two sensors installed close to each other. Use this function in applications, such as discriminating object size or sensing position of moving objects, where two sensors are mounted adjacently.

SUNX SF1-N Series 20 mm Beam Pitch General Purpose Area Sensors Distributors
SF1-N Series

Wide sensing area of 7 m x 1260 mm with 20 mm beam pitch. Compared to the conventional model, much smaller objects can be detected so the distance between parts shelf and sensor can be shortened (Enables miniaturization of equipment). Self-diagnosis function: Both the emitter and the receiver automatically check the internal circuit every 5 ms. Should trouble occur in the sensor, the output is forced to the OFF state and the built-in indicator shows the type of error. Also, the emission can be forcibly stopped by an external input to check if the output follows it. It is convenient for an operation check before start-up.

SUNX SF1-N series has been the first to realize modular construction for 20 mm beam pitch area sensors. It allows easy change in the beam channel number. There are eight types of sensors having a sensing height ranging from 140 mm (8 beam channels) to 1,260 mm (64 beam channels). A spatter protection hood type sensor is also available that protects the sensing face against welding spatters.

SUNX LA-T Series Winding Wire Granular Flaw Detector Distributor
LA-T Series

SUNX LA-T series offers fast and reliable minute granular flaw detection in winding wires. The LA-T11 is just 16 mm (0.630 in) wide allowing it to be mounted on winding wire lines that have a pitch as small as 10 mm (0.394 in). A 0.394 mil flaw (grain or pit) can be reliably detected at a high line speed of 500 m/min. It is suitable for a wide range of lines from a low speed of 5 m/min. to a high speed of 2,500 m/min. Up to 12 sensor heads can be connected to one controller.

In case small amount of dust or dirt sticks to the sensing surface, the controller automatically adjusts the sensitivity. If the light intensity is hindered substantially, an orange alarm indicator illuminates to alert the operated of the need for cleaning.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some SUNX products (SUNX Hot Melt Glue Detection TH-11CS TH-12CS Transparent Object Detection US-N300 Slim/Small Object Detection NA1-11 Discriminating Object Size SF1-F Metal Sheet Double Feed Detection GD Series Sensors Distributors) enabling us to further assist you in finding the correct SUNX Ultrasonic Sensors for your application in the USA (Alabama Alaska Arizona Arkansas California Colorado Connecticut Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusetts Michigan Minnesota Mississippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington Washington D.C. West Virginia Wisconsin Wyoming), Canada and Mexico.

Whether we have SUNX Slim/Small Object Detection Sensors in stock in Boise, Idaho or need to ship direct from SUNX to any USA cities (New York Los Angeles Chicago Houston Philadelphia Phoenix San Diego Dallas San Antonio Detroit San Jose Indianapolis San Francisco Columbus Austin Baltimore Milwaukee Boston Washington El Paso Seattle Denver Charlotte Fort Worth Portland Oklahoma City Tucson New Orleans Las Vegas Cleveland Long Beach Albuquerque Kansas City Fresno Virginia Beach Atlanta Sacramento Oakland Mesa Tulsa Omaha Minneapolis Honolulu Colorado Springs St. Louis Wichita Santa Ana Pittsburgh Arlington Cincinnati Anaheim Toledo Buffalo St. Paul Corpus Christi Aurora Raleigh Newark Lexington Fayette Anchorage Louisville Riverside Bakersfield Stockton Birmingham Jersey City Norfolk Baton Rouge Hialeah Lincoln Greensboro Plano Rochester Glendale Akron Garland Madison Fort Wayne Fremont Scottsdale Montgomery Shreveport Lubbock Chesapeake Mobile Des Moines Grand Rapids Richmond Yonkers Spokane Augusta Glendale Tacoma Irving Huntington Beach Arlington Modesto Durham Boise Winston Salem); Clearwater Tech can get SUNX Discriminating Object Size Detection Sensors to you fast and save some money!

It will be very helpful if you have the SUNX Metal-Sheet Double-Feed Detection Sensors part numbers ready, then our sales representatives can provide you with a pricing and availability quote for SUNX Hot Melt Glue Detection Switches that you are looking for in seconds. If you do not have the part numbers for SUNX Granular Flaw Detection Sensor, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Clearwater Tech Site Usage Policy
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

SUNX Special Usage Sensors TH-11CS TH-12CS US-N300 NA1-11 SF1-F GD LA-T Detection Switches Distributors
SUNX Special Usage Sensors TH-11CS TH-12CS US-N300 NA1-11 SF1-F GD LA-T Detection Switches Distributors
SUNX Special Usage Sensors TH-11CS TH-12CS US-N300 NA1-11 SF1-F GD LA-T Detection Switches Distributors
Clearwater Tech   © 2008 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY