Clearwater Tech Logo
Loading
Home | Contact Us |
(800) 894-0412

Saginaw Control & Engineering

Home   >   Products   >   Saginaw Enclosures

Saginaw Enclosures

(800) 894-0412       (888) 723-4773 (Fax)
info@clrwtr.com

Wall-Mount (Stainless Steel)

The need for robust and space-saving cabinets to protect, house and cool remote sensitive electronic and electrical components is becoming essential.

With decades of innovation protecting vital equipment in both industrial and networking applications, Saginaw Control & Engineering is uniquely qualified to meet the converging demands of networking and challenging plant floor applications. The proven Saginaw brand conserves factory floor space, locates electronics out of the way of machinery and delivers an off-the-shelf, industrial strength solution.

The expanded line of wall-mount enclosures offers the most versatile and rugged solution for a number of demanding indoor and outdoor applications including protection, thermal management and easy access to rack-mounted, 19-in. panel and other sensitive electronics.

Saginaw Stainless Steel Enclosures Distributors

If you are looking for Saginaw Enclosures, please call us at (800) 894-0412 or email us at info@clrwtr.com we will do our best to help you find the Type 3R Saginaw Enclosure that you are looking for at the most competitive prices possible. If you are searching for NEMA 4X Saginaw Enclosures technical information (data-sheets) please use the datasheets or product selection guide page links.

Operator System (Stainless Steel)

Saginaw Control & Engineering's type 12 operator systems are designed to house a wide variety of equipment; panel mount, rack mount, desktop PC's, industrial monitors, keyboards and panel views. These enclosures are primarily used in an indoor environment to protect against dust, falling dirt, dropping of non-corrosive liquid, and light splashing of water.

Pull-out shelves are designed to allow easy access to the back of equipment. Vented pull out shelves are designed to allow air circulation inside the work station. Extends 19" and mounts between the mounting channels provided inside the work station. Slides are included with shelf. Made of heavy gauge steel and powder coated white. Mounting hardware is included. Side mount plate is designed to provide extra mounting space on the sides of the enclosure. Can be securely attached to the mounting channels.

Saginaw Operator Interface Enclosures Distributors

Fiberglass Enclosures

Saginaw Control & Engineering's type 4X fiberglass enclosures are designed for indoor or outdoor use to house electronic controls, instruments and components in areas that may be regularly hosed down, in very wet conditions, or are exposed to corrosive agents. These enclosures provide protection from corrosion, wind blown dust, rain, spraying water, hose directed water and ice formation on the enclosure.

These enclosures are molded under heat and pressure with fiberglass reinforced polyester resin to produce superior chemical resistance in corrosive applications. The glass fiber reinforcement increases impact resistance, produces a superior range of temperature limits, increases ability to withstand additional tensile loads and exhibits excellent electrical properties. Fiberglass has a service temperature range of -40°F (-40°C) to 250°F (121°C). Relative cost is low versus other materials while providing average physical strength.

Saginaw NEMA 4X Fiberglass Enclosures Distributors

Modular Enclosures

Saginaw Control and Engineering's Industrial Modular System Enclosures (IMS) are designed to house electrical and electronic controls, instruments and components, with integrated mounting channels in the top and bottom of the enclosure and grid mounting options making this product more flexible and easier to work with.

These enclosures are primarily for use in an indoor environment to protect against dust, dropping of non-corrosive liquids and light splashing of water.

Finish of the enclosures is powder coated white inside and out. Saginaw NEMA 12 IMS enclosures support the following industry protection standards NEMA Type 12 & Type 13 UL Listed Type 12 CSA Type 12 IEC 60529 IP 55.

End plates are designed to provide a sealed cover for the open end of a modular enclosure. Provides additional wiring space along the side of the enclosure. Gasket and mounting hardware is included. Made of heavy gauge steel and powder coated ANSI-61 gray. Barrier/flat end plates are designed to serve as a barrier between two modular enclosure sections. Also can be used to provide a lower profile sealed cover for the open end of a modular enclosure. Mounting holes.

Saginaw Type 12 IMS Enclosures Distributors

NEMA 12 Disconnect

Saginaw Control & Engineering's Type 12 Disconnect Enclosures are designed to house most standard types of disconnects and circuit breakers as well as electrical and electronic controls, instruments and components.

Primarily for use in an indoor enviroment to protect against dust, falling dirt, dropping of non-corrosive liquid, and light splashing of water.

Finish of the enclosure is ANSI-61 high solids recoatable gray finish over phosphatized surfaces.

Saginaw Type 12 Disconnect Enclosures Distributors
NEMA 12 Disconnect

Trough Enclosure

Enviroline Series Trough Enclosures are designed to house electrical controls, instruments and components used in an indoor or outdoor environment. Trough enclosures are available Stainless Steel with #4 brushed finish or Steel powder coated ANSI 61 gray, with or without viewing window. Trough enclosures with window have large viewing area for easy visibility of digital or analog components inside.

Designed to house electrical controls, instruments and components used in an indoor or outdoor environment to provide a degree of protection for the equipment inside the enclosure against ingress of solid foreign objects (falling dirt); and provide a degree of protection with respect to the harmful effects on the equipment due to the ingress of water (rain, sleet, snow).

Saginaw Enviroline Series Trough Junction Enclosures with Viewing Window Distributor

Enviroline Trough Junction

Accessories

Saginaw Control & Engineering offers hundreds of accessories that complement our enclosure product line, making it easy to modify or add special features to standard products.

  • Air Conditioners
  • Casters, Leveling Pads
  • Door Latches and Handles
  • Door Stop Kits
  • Drip Shields and Rain Hoods
  • Fans, Fan Packages, Blower Packages
  • Folding Shelves and Pull Out Shelves
  • Floor Stands, Mounting Strips, Mounting Feet
  • Fluorescent Lighting
  • Grounding Bars, Grounding Straps
  • Heaters
  • Hole Plugs
  • Interior and Exterior Print Pockets
  • Louvers, Filters, Filter and Grille Packages
  • Mechanical and Electrical Interlocks
  • Program Ports and Convenience Receptacles
  • Subpanels, Galvanized Subpanels
  • Swing Out Panel Kits
  • Terminal Kits
  • Windows and Window Kits
  • Wire Covers
Saginaw Enclosure Accessories Distributors

Accessories

LED Light Fixtures

LED light fixture is designed to provide interior lighting for an enclosure. Can be mounted to light channels in the top of an enclosure or on the front flange of most enclosures. Door activated adjustable switch, switch can be removed and relocated. Terminal block on each end of fixture, making it easy to wire and daisy chain multiple lights continuously. LED bulb with PVC frosted white protective light diffuser included. Housing made from steel and powder coated white. Units with convenience receptacle outlet are 120 VAC with ground 50/60 HZ. Without convenience receptacle outlet 100 to 277 VAC 50/60 HZ.

Saginaw LED Light Fixture Distributor

LED Light Fixtures

Thermostats

Designed to regulate air temperature in enclosures that operate with heaters or fans. This mechanical bi-metallic thermostat has a set point range of 30° to 140° F and is easily installed on 35mm mounting rail. (NC) contact normally closed, or (NO) contact normally open, switch capacity 10 amp 120-250 VAC Resistive load and 1 amp 120-250VAC Inductive load, 1.25 amp 24VDC.

Saginaw SCE-TEMNC & SCE-TEMNO Thermostat Distributors

Saginaw Control & Engineering has been serving the electrical industry since 1963. We specialize in manufacturing both standard stock and custom designed enclosures as well as precision sheet metal fabrications. Our 255,000 square foot manufacturing and warehouse facility, located in Saginaw, Michigan, uses state of the art fabricating equipment including the newest laser technology. All Saginaw Enclosure products are protected with the highest quality paint and powder finishes available in today's market. In addition to our manufacturing facility and warehouse, Saginaw Control & Engineering has distribution centers in Aurora, Ohio, and Kenosha, Wisconsin. Both are 30,000 square feet and are conveniently located to serve enclosure customers throughout the U.S. Saginaw Enclosures can supply top-notch quality products built to accurate dimensions.

From concept to completion, the SCE staff will work with you to satisfy your needs. Whether you require a standard stock enclosure or a custom built enclosure, SCE can be Your Enclosure Source. As one of the leading electrical enclosure manufacturers in the country, Saginaw Controls & Engineering, Inc., headquartered in Saginaw, Michigan, has been able to improve productivity and drastically reduce finishing time by switching from a TIG (GTAW) welding process to an innovative MIG (GMAW) process from The Lincoln Electric Company. The change has also enabled Saginaw Enclosures to install a new automated production line, further enhancing productivity at this 40-year-old company. Although Saginaw Enclosures had used the MIG (GMAW) process previously in some areas of its plant, the intermittent spatter associated with traditional MIG, as well as the distortion created on thin materials, prevented the company from looking to conventional MIG as a real solution throughout the plant. Saginaw Control & Engineering found that the STT process is able to yield a weld that is consistent and smooth, with a cosmetic appearance similar to TIG, but with the added-benefit of increased travel speeds, virtually eliminating spatter and distortion on these enclosure products which house electrical components.

According to Fred May, President & CEO of Saginaw Control & Engineering, creating quality welds is key to the success of the company's product. "In this business, it is imperative to have high integrity welds because many of Saginaw Electrical Enclosures are found in harsh environments. If a weld fails, it could mean potential damage to the very items Saginaw Enclosures are designed to protect," said May. "It is this high quality that keeps our customers coming back." Another key to the success of Saginaw Controls & Engineering is having flexible equipment. The company manufactures a broad range of products, including more than 1,000 stock parts and hundreds of custom parts. Electrical enclosures can range in size from 4" x 4" to 90" x 200", and be composed of steel, stainless steel, aluminum, galvanized and galvanneal. These products can be found on machine tools and plumbing stations in industries such as automotive, food processing, water treatment, waste treatment and construction/mining. Saginaw Enclosures' customer list boasts such well-recognized brand names at General Motors, Ford Motor Company and Siemens.

Whether we have Saginaw Enclosures in stock in Boise Idaho or need to ship direct from Saginaw Control & Engineering to any USA cities; Clearwater Tech can get Saginaw Enclosures to you fast and save you some money. Our Saginaw Control & Engineering distributors warehouse stocks some SCE products enabling us to further assist you in finding the correct Saginaw Enclosures in the USA, Canada, or Mexico. It will be very helpful if you have the Saginaw Enclosure part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Saginaw Disconnect Enclosures that you are looking for in seconds. If you do not have the part numbers for Saginaw Stainless Steel Enclosures, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

Allied Moulded Box

AMU Ultraline Series comes standard with "industry exclusive" mounting options including an out of the box mounting flange or adjustable mounting feet to cover various mounting configurations. Featuring molded latch keepers, a tongue and groove seal design, and a flange design that can be retrofit to competition, Ultraline is the ultimate in fiberglass enclosures. A clear polycarbonate cover option is also available

Vynckier Enclosures

The APO Series enclosures are capable of withstanding continuous temperatures up to 302 F (150 C). Clear polycarbonate covers are able to resist temperatures of up to 248°F (120°C). APO enclosures provide protection for equipment and operators from indirect electrical contact. All APO enclosures have the capability to be horizontally or vertically coupled by means of gasketed coupling collars.