Saginaw Control & Engineering
Saginaw Control & Engineering's type 12 operator systems are designed to house a wide variety of equipment; panel mount, rack mount, desktop PC's, industrial monitors, keyboards and panel views. These enclosures are primarily used in an indoor environment to protect against dust, falling dirt, dropping of non-corrosive liquid, and light splashing of water.
Operator System Enclosures
Pull-out shelves are designed to allow easy access to the back of equipment. Vented pull out shelves are designed to allow air circulation inside the work station. Extends 19" and mounts between the mounting channels provided inside the work station. Slides are included with shelf. Made of heavy gauge steel and powder coated white. Mounting hardware is included. Side mount plate is designed to provide extra mounting space on the sides of the enclosure. Can be securely attached to the mounting channels.
Stationary shelf is designed to support monitors, PC's, printers or any other equipment. Mounts between the mounting channels provided inside the work station. Monitor Shelf is designed to support the monitor or other components in the upper section of the work station. Vented shelf allows air circulation inside the work station. Panel supports can be installed horizontally to the left and right side of enclosure. Allows easy installation of optional panels or (RA) and (RP) type rack mounting angles to make them adjustable from front to back of the enclosure. Clamping nuts with a #10-32 retained nut will fit all rack mounting angles and rack mounting frames, to provide tapped holes. Nuts are zinc plated.
If you are looking for Saginaw Operator Interface Enclosures, please call us at (800) 894-0412 or email us at firstname.lastname@example.org we will do our best to help you find Saginaw NEMA 4 ELJ consolets that you are looking for at the most competitive prices possible. If you are searching for Saginaw type 13 series 9 consoles technical information (data-sheets) please use the datasheets product selection guide page links.
- One-piece construction allows flexibility and maximizes the usable interior space.
- Memory retaining oil resistant urethane gasket.
- Exclusive SCE concealed hinges on work station enclosures.
- Work Stations are available in textured beige or 304 stainless steel.
- Slope Top Workstations have 20 degree sloped top and 12.5 degree sloped keyboard desk.
- Operator system enclosures can be custom ordered in type 304 or 316 stainless steel.
- Many accessories available.
- Series 9 Consoles
- Series 14 Single Door Consoles
- Series 14 Two Door Consoles
- Series 14 Accessories
- Work Stations, Stainless & Steel
- Slope Top Workstation, Stainless & Steel
- Pedestal Mounted or Desk Top Work Stations, Stainless & Steel
- Work Station Accessories
Blank top door is designed to replace the top door when cutouts are desired. Oil resistant gasket. Installed by removing hinge pin. Black quarter turn latches. "SS" door is made of type 304 stainless steel with #4 brushed finish. Pedestal is designed to allow desktop work stations to be floor mounted. Gasket and hardware provided to attach to work station. Pedestal base is designed to mount pedestal to the floor. Door latch inserts are designed to replace black quarter turn latches when additional security is required. Door handles are designed to replace the flush swing handle when alternative locking mechanism is desired. Zinc die cast steel with black textured finish.
Whether we have Saginaw series 14 consoles & accessories in stock in Boise Idaho or need to ship direct from Saginaw Controls & Engineering to any USA cities; Clearwater Tech can get Saginaw stainless steel desk consoles to you fast and save you some money. Our industrial factory automation supplies distributors warehouse stocks some SCE work stations products enabling us to further assist you in finding the correct Saginaw pedestal mounted/desk top work station in the USA, Canada, or Mexico. It will be very helpful if you have the Saginaw slope top work station part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Saginaw Control & Engineering products that you are looking for in seconds. If you do not have the part numbers for Saginaw stainless steel work station accessories, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
Type 12 enclosures are constructed (without knockouts) for indoor use to provide a degree of protection to personnel against access to hazardous parts, to provide a degree of protection of the equipment inside the enclosure against ingress of solid foreign objects (falling dirt and circulating dust, lint, fibers, and flyings), and to provide a degree of protection with respect to harmful effects on the equipment
Allied Moulded Box
Allied Moulded AMU ultraline series comes standard with "industry exclusive" mounting options including an out of the box mounting flange or adjustable mounting feet to cover various mounting configurations. Featuring molded latch keepers, a tongue and groove seal design, and a flange design that can be retrofit to competition, Ultraline is the ultimate in fiberglass enclosures. A clear polycarbonate cover option is also available