Clearwater Tech Logo

Saginaw Control & Engineering

Home   >   Products   >   Saginaw   >   Wall-Mount Enclosures

Saginaw Enclosures

Protect your network components and hardware while maximizing floor space with these wall mount enclosures. Sidemount and low-profile enclosures help you save even more space by allowing equipment to be mounted sideways or vertically, and corner wallmount cabinets are perfect for areas with limited space.

Saginaw Pushbutton Enclosures Distributors

Pushbutton

Saginaw Control & Engineering's type 12 pushbutton enclosures are designed to house oil-tight push buttons, switches, and pilot lights.

Saginaw push button enclosures are primarily used in an indoor environment to protect against dust, falling dirt, dropping of non-corrosive liquid, and light splashing of water.

Add the letter "I" to the end of the part number to receive the enclosure with 22.5 mm international pushbutton holes.

If you are looking for Saginaw Wall-Mount Enclosures, please call us at (800) 894-0412 or email us at info@clrwtr.com we will do our best to help you find Saginaw pushbutton enclosures that you are looking for at the most competitive prices possible. If you are searching for Saginaw NEMA 1 enclosure technical information (data-sheets) please use the datasheets or product selection guide page links.

Saginaw NEMA 1 Enclosure Distributor

Type 1

Saginaw Control & Engineering's type 1 enclosures are designed for control and instrumentation applications.

They are a general-purpose enclosure intended for indoor use or locations where unusual service conditions do not exist.

Type 1 Enclosures primarily provide protection against accidental contact with live parts and against a limited amount of falling dirt.

The SCE design incorporates an exclusive sub-panel design, which maximizes available space for all size enclosures. Any of the standard SCE quarter turn replacement latches and handles can be used in the Type 1 products. Type 1 Enclosures with knockouts are available in precaution blue, safety orange or taupe tan textured powder coat finish.

Saginaw Type 3R Screw Cover Enclosures Distributors

NEMA 3R

Saginaw Control & Engineering's type 3R enclosures are designed to house electrical controls, instruments and components. These enclosures are primarily used in an outdoor environment to protect against rain, sleet and snow, and indoors against dropping water.

Saginaw Control and Engineering's vented type 3R enclosures are designed to house electrical controls, drives, instruments and components used in an outdoor environment to provide a degree of protection for the equipment inside the enclosure against ingress of solid foreign objects (falling dirt); and provide a degree of protection with respect to the harmful effects on the equipment due to the ingress of water (rain, sleet, snow). This design incorporates a rain cap that acts as a solar shield to minimize solar heat gain, rain hood with filters for air intake, and cooling fans exhaust out the top to control internal heat load, with six standard sizes available.

Saginaw NEMA 4 Enclosure Distributor

NEMA 4

Saginaw Control & Engineering's type 4 enclosures are designed to work in a wide range of environments indoors or outdoors, and house electronic controls, instruments, and components.

These enclosures provide protection from wind blown dust, rain, splashing water, hose directed water and ice formation on the enclosure.

This Stainless Steel Enviroline wall mount enclosure has been designed for indoor or outdoor type 3R, 12, 4 and 4X applications. This enclosure line was also designed with 3 point door hardware for easier access and can be securely locked to provide protection to personnel against access to hazardous parts. In addition, it protects the equipment inside the enclosure against introduction of solid foreign objects, falling dirt, rain and spraying water in corrosive environments.

Saginaw Stainless Steel Enclosures Distributors

NEMA 4X Stainless Steel

Saginaw Control & Engineering's type 4X stainless steel enclosures are designed to work in a wide range of application environments indoors or outdoors, and house electronic controls, instruments, and components.

Saginaw NEMA 4X stainless steel enclosures provide protection from corrosion, wind blown dust, rain, spraying water, hose directed water and ice formation on the enclosure.

304 & 316 stainless steel with #4 brushed finish.

Exclusive SCE concealed hinges on Enviroline series enclosures.

Memory retaining oil resistant urethane gasket.

Many of the standard SCE quarter turn replacement latches and handles can be used on Enviroline series enclosures.

Saginaw Type 4X Stainless Steel Disconnect Enclosure Distributor

Type 4X Stainless Steel Disconnect

Saginaw Control & Engineering's type 4X stainless steel disconnect enclosures are designed to work in a wide range of environments indoors or outdoors, and house most standard types of disconnects and circuit breakers as well as house electronic controls, instruments and components.

These enclosures provide protection from corrosion, wind blown dust, rain, spraying water, hose directed water and ice formation on the enclosure.

Saginaw Type 4X provides provisions for flange mounted disconnects and circuit breakers.

Provides provisions for flange mounted disconnects and circuit breakers.

Saginaw NEMA 4 Disconnect Enclosures Distributors

NEMA 4 Disconnect

Saginaw Control & Engineering's type 4 disconnect enclosures are designed to work in a wide range of environments indoors or outdoors, and will house most standard types of disconnects and circuit breakers as well as electronic controls, instruments, and components.

These enclosures provide protection from wind blown dust, rain, splashing water, hose directed water and ice formation on the enclosure.

Saginaw NEMA 4 disconnect enclosures support the following industry protection standards NEMA Type 4 & 12 UL, CSA, TUV, & IEC Approved.

ANSI-61 gray powder coated finish. Provides provisions for flange-mounted disconnects and circuit breakers.

Saginaw Type 12 Stainless Steel Enclosure Distributor

NEMA 12 Steel & Stainless Steel

Saginaw Control & Engineering's type 12 enclosures are designed to house electrical and electronic controls, instruments and components.

These enclosures are primarily for use in an indoor environment to protect against dust, falling dirt, dropping of non-corrosive liquid, and light splashing of water.

Optional panels are powder coated white epoxy polyester.

Whether we have Saginaw Control & Engineering type 3R enclosures in stock in Boise Idaho or need to ship direct from Saginaw Controls & Engineering to any USA cities; Clearwater Tech can get Saginaw type 4 enclosures to you fast and save you some money. Our industrial factory automation products distributors warehouse stocks some SCE products enabling us to further assist you in finding the correct Saginaw type 4X stainless steel enclosures in the USA, Canada, or Mexico. It will be very helpful if you have the Saginaw NEMA 4X stainless steel disconnect enclosure part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Saginaw Control & Engineering products that you are looking for in seconds. If you do not have the part numbers for Saginaw type 4 disconnect enclosures, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check

Part No:
OR
Manufacturer:

Search Tips
Can't find a part number?
E-mail Us!

Hammond Enclosure

C-Box Screw Cover with Knockouts is designed for general purpose indoor commercial use as a junction, pull or switch box. It is formed and spot welded from 16 or 14 gauge steel depending on size. Flat steel covers are fastened with plated steel screws. Keyhole slots permit cover to be lifted off without removing screws entirely. Hammond Manufacturing enclosure and cover are finished in ANSI 61 gray powder coating.

Vynckier Enclosures

The Industry is experiencing unprecedented growth with more domestic solar installations built in the third quarter of 2011 than in the entire year prior. With such a strong focus on commercial, residential and utility applications, many companies are looking for flexible solutions to maximize their solar market presence. As the World's leading Manufacturer of Non-Metallic NEMA Enclosures, Vynckier is one of the pioneers in meeting the UL 1741