Clearwater Tech Logo
Loading
Home | Contact Us
(844) 331-9374

Sentrol Industrial

Home   >   Products   >   ITI   >   1038 Series   >   Surface Mount Contacts

GE Security - Sentrol Industrial

(844) 331-9374       (888) 723-4773 (Fax)
info@clrwtr.com

1038T Series Surface Mount with Screw Terminals

The 1038T contact is designed for window and door applications where surface mounting is preferred.

Because of its sleek design, the 1038 contact is fast and easy to install. The switch and magnet are incorporated into the housing, and the terminal blocks are angled for easy access.

In the unlikely event that the switch needs replacing, just push the housing down and slide it off. This reduces replacement time and eliminates any damage to the mounting surface.

GE Sentrol 1038T Series Surface Mount Terminal Magnetic Contacts Distributors
1038T Series

If you are looking for GE Sentrol 1038T Series Magnetic Contacts, please call us on (844) 331-9374 or email us at info@clrwtr.com we will do our best to help you find the GE Interlogix 1038T-N Position Sensors that you are looking for at the most competitive prices possible. If you are searching for Sentrol Industrial 1038-M Magnetic Door Contact technical information (data-sheets) please use the datasheets or product selection guide page links.

  • Attractive low-profile design
  • Simple to install
  • Angled terminal blocks for easy installation

1038 Series Surface Mount with Wire Leads

The 1038 series contacts are designed for window and door applications where surface mounting is preferred.

Because of its sleek design, the 1038T contact is fast and easy to install. The switch and magnet are incorporated into the housing, and the terminal blocks are angled for easy access.

In the unlikely event that the switch needs replacing, just push the housing down and slide it off. This reduces replacement time and eliminates any damage to the mounting surface.

Sentrol 1038 Series Surface Mount Magnetic Contacts with Wire Leads Distributor
1038 Series
  • Attractive, low-profile design
  • Simple to install
  • Easy to replace switch if needed

The contact contains a hermetically sealed magnetic reed switch. The reed switch shall be potted in the contact housing with a polyurethane based compound. Connection to the contact shall be made through a 2 mm screw terminal block. The contact and magnet can be mounted with either 3M adhesive tape or #4 by 1/2" screws, both provided. Contact and magnet shall be nominal 2.26" (5.74 cm) L x .375" (.95 cm) W x .395" (1.00 cm) D and mount on 1.63" (4.13 cm) centers. Colors shall be specified as white and mahogany brown.

Align and attach mounting plates for switch and magnet using tape or screws (included). Strip loop wire, twist and insert into screw terminals and tighten screws. (Wire can be routed through mounting plate, on either end, or through top of switch housing cut outs provided.) Place switch and magnet covers over center of mounting plates and slide to either left or right until housing snaps into place.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Sentrol Industrial products enabling us to further assist you in finding the correct 1038-N magnetic contact for your application in the USA, Canada and Mexico. Whether we have 1038M-10PKG contact in stock in Boise, Idaho or need to ship direct from UTC Fire & Security to any USA cities; Clearwater Tech can get 1038N-10PKG contact to you fast and save money! It will be very helpful if you have 1038T-N contact part numbers ready, then our sales representatives can provide you with a pricing and availability quote for 1038-M magnetic contact that you are looking for in seconds. If you do not have the part numbers for 1038-N series contacts, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us.

Banner Switches

These Safety Switches are designed for non-locking guarding applications, unless another means of locking is provided. The SI-LM40xxx Series Safety Limit (Position) Switches are considered a Type 1 interlocking device per ISO 14119 that are mechanically actuated by an uncoded rotary or linear actuator (cam or "dog") typically mounted on or part of the guard. A variety of actuating systems are available: plunger (dome),

Vacon Drives

The 100 Series by Vacon is a multipurpose drive that can be used in hundreds of different applications. Its versatility is what sets it apart from competitors, and the features it contains are designed to make it easy to run and maintain. Built-in Ethernet allows for easy integration to plant automation and VACON Live means the user can commission, maintain and monitor performance remotely. The drive can be customized for all kinds of purposes to ensure you