Clearwater Tech Logo
Loading
Home | Contact Us
(844) 331-9374

Sentrol Industrial

Home   >   Products   >   Interlogix   >   1072 Series   >   Recessed Mount Contacts

GE Security - Sentrol Industrial

(844) 331-9374       (888) 723-4773 (Fax)
info@clrwtr.com

1072 Series Recessed Mount Flanged with Wire Leads

The 1072 series recessed contacts are designed for applications where the added integrity of mounting screws is needed.

The contacts work well in both wood and metal frame doors and windows.

The two mounting holes provide additional strength to prevent the contact and magnet from becoming dislodged due to environmental changes.

Such changes may occur when the door or window frame warps and misaligns from moisture or the settling of a building.

Sentrol 1072-N Series Recessed Contacts 3/8 Diameter Flanged with Wire Leads Distributors

1072 Series

If you are looking for GE Sentrol 1072 Series Magnetic Contacts, please call us on (844) 331-9374 or email us at info@clrwtr.com we will do our best to help you find the GE Interlogix 1072-N Position Sensors that you are looking for at the most competitive prices possible. If you are searching for Sentrol Industrial 1072W-N Magnetic Door Contact technical information (data-sheets) please use the datasheets or product selection guide page links.

No. 2 sheet metal screws come with the switch.

A wide gap model is available to protect against false alarms from loose-fitting doors and windows.

  • Recessed installation makes contacts less visible, more difficult to detect and defeat
  • Corrosion resistant, hermetically sealed switch works well in moist or dusty areas
  • Available wider gap distance helps prevent false alarms caused by loosefitting doors and windows

Gap Specifications are nominal and may vary ± 20%. Gap Specifications are for switch to make.

Break distance is approximately 1.1 to 1.5 times make.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Sentrol Industrial products enabling us to further assist you in finding the correct 1074D-N magnetic contact for your application in the USA, Canada and Mexico.

Whether we have 1072N-10PKG contact in stock in Boise, Idaho or need to ship direct from UTC Fire & Security to any USA cities; Clearwater Tech can get 1072-N contact to you fast and save money!

It will be very helpful if you have 1072W-N contact part numbers ready, then our sales representatives can provide you with a pricing and availability quote for 1074D-N magnetic contact that you are looking for in seconds.

If you do not have the part numbers for 1072 series contacts, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us.

SymCom Timers

When Power is applied to the T-10, it immediately begins its timing cycle. During this time, the indicator LED alternates between red and green, and the output contacts remain inactive. When the timing cycle is complete, the indicator LED turns solid green, and the output contacts are activated. The output contacts will remain activated until power is removed from the T-10. The T-10 On-Delay Timer is a solid-state electronic device

Datalogic Sensors

The Yellow LED permanently ON or OFF indicates the output status. The yellow LED blinking indicates the short circuit protection is turned on the output. The new S15 series of M18 tubular sensors offers both plastic case version S15-PA and stainless steel IP69K housing version S15-NA. S15-PA plastic version is recommended for cost and space savings with a wide selection of optic functions, ranging from 5 m retroflex to 1 m diffuse proximity and 12 cm background suppression.