Clearwater Tech Logo
Home | Contact Us
(844) 331-9374

Sentrol Industrial

Home   >   Products   >   Interlogix   >   1075 Series   >   Recessed Mount Contacts

GE Security - Sentrol Industrial

(844) 331-9374       (888) 723-4773 (Fax)

1075 Series Recessed Mount Press Fit with Wire Leads

The 1075 series press fit switch is a 3/8-inch diameter magnetic contact with wire leads that uses no glue or screws to mount. Small ribs on the housing hold the contact in place. Heavy-duty housing resists crushing from swelling wood.

Use indoors or outdoors for an attractive recessed installation. In addition to wood doors, the 1075 series is useful for protecting china cabinets or closets, double-hung windows, and aluminum windows.

Sentrol 1065T 1065TW 1075T 1075TW Series 3/8 Diameter Press Fit Terminal Magnetic Contacts Distributors

1075 Series

If you are looking for GE Sentrol 1075 Series Magnetic Contacts, please call us on (844) 331-9374 or email us at we will do our best to help you find the GE Interlogix 1065W-N Position Sensors that you are looking for at the most competitive prices possible. If you are searching for Sentrol Industrial 1070-N Magnetic Door Contact technical information (data-sheets) please use the datasheets or product selection guide page links.

  • Press fit design makes installation easy-no screws or glue needed
  • Heavy-duty housing resists crushing
  • Attractive, added security of recessed installation
  • Available wider gap distance helps prevent false alarms caused by loose-fitting doors and windows
  • Reliably field proven for more than 20 years
  • UL listed for indoor and outdoor use

1075T Series Recessed Mount Press Fit with Terminals

Sentrol's 1075T series press fit switch is an 11 mm diameter magnetic contact with wire leads. Use no glue or screws to mount; small ribs on the housing hold the contact in place. The heavy-duty housing is resist against crushing from swelling wood. Wide gap versions are available for applications that may be prone to false alarms caused by loose fitting doors. Use indoors or outdoors for an attractive recessed installation. Can be used for recessed applications, either indoor or outdoor.

Sentrol 1075TW-N Press-Fit Recessed Mount Magnetic Contacts with Terminals Distributor

1075TW Series

The Sentrol high performance magnetic contacts have been designed to facilitate installation and ensure durability and dependability. Most are conservatively rated at 10,000,000 cycles, guaranteeing a long life. Every reed connection is hand soldered and each magnetic contact is tested before they leave the factory, 100% of the time.

Reed legs are plated with rhodium or ruthenium, and hermetically sealed in dry nitrogen. This offers superior protection against sticking and provides a moisture free environment therefore preventing corrosion.

The 1075T series magnetic contacts contains terminals that allows to reduce the installation time drastically.

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Sentrol Industrial products enabling us to further assist you in finding the correct 1075W-N magnetic contact for your application in the USA, Canada and Mexico. Whether we have 1075-M contact in stock in Boise, Idaho or need to ship direct from UTC Fire & Security to any USA cities; Clearwater Tech can get 1075-N contact to you fast and save money! It will be very helpful if you have 1075M-10PKG contact part numbers ready, then our sales representatives can provide you with a pricing and availability quote for 1075N-10PKG magnetic contact that you are looking for in seconds. If you do not have the part numbers for 1075W-M series contacts, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips

Can't find a part number?
E-mail Us.

TURCK Modules

The DPC System (Diagnostic Power Conditioner) is a power supply system for the installation of FOUNDATION fieldbus H1 segments. It provides extensive diagnostic options for monitoring FOUNDATION fieldbus segments and thus supports plantwide asset management. A DPC system consists of one or more module racks, each with up to eight DPC-49-IPS1 power supply modules and one DPC-49-ADU resp. DPC-49-DU diagnostics modules.

IDEC Software

Offline Program Simulation (without the need for an actual unit) enables testing of the entire program from a PC, or you can test and monitor your IDEC SmartRelay online. You can create and save your WindLGC program as a .pdf or .jpg file. Professional documentation is included with all necessary configuration information such as comments and program settings. Upgrade the existing WindLGC installation to the current version to use new features and enhancements