Clearwater Tech Logo
Loading
Home | Contact Us
(844) 331-9374

Sentrol Industrial

Home   >   Products   >   Interlogix   >   1076/1078 Series   >   Steel Door Contacts

GE Security - Sentrol Industrial

(844) 331-9374       (888) 723-4773 (Fax)
info@clrwtr.com

1076/1078 Series 3/4" & 1" Steel Door Contacts

The GE Interlogix 1078 Series Steel Door contacts are designed specifically for use in the steel doors commonly found in commercial building applications. The unique housing design features a rugged unibody construction with flexible ribbed sides for quick, secure installation without gluing. The magnet housing isolates the magnet from the surrounding steel for maximum gap distances, both make and break. Over seven models including: Wide Gap, SPDT, DPDT, and Biased for High Security applications make the 1078 Series the most widely used and comprehensive line available.

Sentrol 1076 1076W 1076C 1076CW 1076D 1078 1078W 1078C 1078CT (R)1078 1078CTW Series 3/4 & 1 Steel Door Contacts Distributors
1076/1078 Series

If you are looking for GE Sentrol 1078 Series Magnetic Contacts, please call us on (844) 331-9374 or email us at info@clrwtr.com we will do our best to help you find the GE Interlogix 1076-G Position Sensors that you are looking for at the most competitive prices possible. If you are searching for Sentrol Industrial 1076-M Magnetic Door Contact technical information (data-sheets) please use the datasheets or product selection guide page links.

On available models a terminal connection (T) makes installation easier. Simply strip the wire, insert it into the terminal block and tighten. The terminal accepts any wire size from 14 to 22 gauge, and has a unique one piece design for added strength.

An optional Rare Earth Magnet is available. It is designed for use in metal entry/exit doors with a channel in the top of the door. The magnet eliminates the need to cut a mounting hole in the door channel. The flexible magnet housing can be compressed to accommodate a variety of channel widths for quick, easy installation. Adhesive is recommended.

The contact contains a hermetically sealed magnetic reed switch. The reed shall be potted in the contact housing with a polyurethane based compound. Contact and magnet housing shall snap-lock into a 3/4" or 1" dia. hole. Housings shall be molded of flame retardant ABS plastic. Color of housings shall be off-white, grey or mahogany brown. The magnet shall be made of Alnico V. Rare Earth Magnet shall be made of neodymium iron boron.

Snap-lock insulation bushing for tight fit and maximum gap in steel. Both contact and magnet plastic housings are constructed of one piece of thick-walled ABS plastic for maximum strength and durability.

  • Fly leads and terminal options available
  • Designed specifically for use in steel doors
  • Special ribbed sides allow for easy installation
  • Rugged unibody construction for maximum durability and reliability
  • Terminal models available for easier installation
  • Regular, Wide Gap, SPDT, DPDT, and High Security models available
  • Rare Earth Magnet designed for steel door with top channel available

1078C Series 3/4" Recessed Mount with Wire Leads

The 1078C series recessed contacts are designed specifically for use in the steel doors commonly found in commercial building applications.

The unique housing design of the 1078C contact features a rugged unibody construction with flexible ribbed sides for quick, secure installation without gluing. The magnet housing isolates the magnet from the surrounding steel for maximum gap distances.

A wide gap model is available to protect against false alarms from loose-fitting doors, and a high security model is also available.

Sentrol 1078C Series Recessed Steel Door Magnetic Contacts with Wire Leads 3/4 in. Dia. Distributor

1078C Series
  • 3/4-inch diameter for easier drilling in metal
  • Special ribbed sides allow for easy installation
  • Rugged unibody construction for maximum durability and reliability
  • Recessed installation makes contacts less visible and more difficult to detect and defeat
  • Available wider gap distance helps prevent false alarms caused by loosefitting doors and windows

1078T/1078CT Series 3/4" Recessed Steel Door with Terminals

The Sentrol 1078T Series Steel Door Terminal Contacts are designed specifically for use in the steel doors commonly found in commercial building applications. The unique housing design features a rugged unibody construction with flexible ribbed sides for quick, secure installation without gluing. The magnet housing isolates the magnet from the surrounding steel for maximum gap distances, both make and break.

Sentrol 1078CT Series Recessed Steel Door Magnetic Contacts with Terminals 3/4 in. Dia. Distributors
1078T/1078CT Series

The terminal connection adds to the ease of installation. Simply strip the wire, insert it into the terminal block and tighten. The terminal accepts any wire size from 14 to 22 gauge, and has a unique one piece design for added strength.

An optional Rare Earth Magnet is available. It is designed for use in metal entry/exit doors with a channel in the top of the door. The magnet eliminates the need to cut a mounting hole in the door channel. The flexible magnet housing can be compressed to accommodate a variety of channel widths for quick, easy installation. Adhesive is recommended.

The contact contains a hermetically sealed magnetic reed switch. The reed shall be potted in the contact housing with a polyurethane based compound. Contact and magnet housing shall snap-lock into a 3/4" or 1" dia. hole. Housings shall be molded of flame retardant ABS plastic. Color of housings shall be white, grey or mahogany brown. The magnet shall be made of Alnico V. Rare Earth Magnet shall be made of neodymium iron boron.

Snap-lock insulation bushing for tight fit and maximum gap in steel. Both contact and magnet plastic housings are constructed of one piece of thick-walled ABS plastic for maximum strength and durability.

  • New terminal design for easy connection
  • Designed specifically for use in steel doors
  • Special ribbed sides allow for easy installation
  • Rugged unibody construction for maximum durability and reliability
  • Regular and Wide Gap
  • Rare Earth Magnet designed for steal doors with top channel available

R1078 Series 1" Mini-Max Recessed Steel Door with Rare Earth Magnets & Wire Leads

The 1078 series recessed contacts are designed specifically for use in the steel doors commonly found in commercial building applications.

The unique housing design of the 1078 contact features a rugged unibody construction with flexible ribbed sides for quick, secure installation without gluing. The magnet housing isolates the magnet from the surrounding steel for maximum gap distances.

Sentrol R1078 Series Mini-Max Recessed Steel Door Magnetic Contacts with Rare Earth Magnets and Wire Leads, 1 in. Dia. Distributors

R1078 Series

The Rare Earth magnet is designed for use in metal entry/exit doors with a channel in the top of the door. The magnet eliminates the need to cut a mounting hole in the door channel. The flexible magnet housing can be compressed to accommodate a variety of channel widths for quick, easy installation. Adhesive is recommended.

  • Special design for mounting in top channel of steel doors
  • Special ribbed sides allow for easy installation
  • Rugged unibody construction for maximum durability and reliability

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Sentrol Industrial 1076D-M switches enabling us to further assist you in finding the correct 1076-N magnetic contact for your application in the USA, Canada and Mexico. Whether we have 1076C-M contact in stock in Boise, Idaho or need to ship direct from UTC Fire & Security to any USA cities; Clearwater Tech can get 1076C-N contact to you fast and save money! It will be very helpful if you have 1076CW-M contact part numbers ready, then our sales representatives can provide you with a pricing and availability quote for 1076CW-N magnetic contact that you are looking for in seconds. If you do not have the part numbers for 1076D-G series contacts, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us.

WEG Drives

WEG digital CFW-10 VFD series is an offspring of the very successful CFW08 Plus. In addition to a very small, easily mounted package, simplified keypad and bright LED readout, complete diagnostics and fully programmable I/O, the CFW10 controls three phase AC motors with a single phase AC input. Single phase 120V AC input voltage will produce three phase 230V to drive motors up to 1 HP and single phase 230V AC will produce three phase

SymCom Monitors

The Settable Trip Class range is 2-60, with or without jam protection, and a secondary linear trip delay can be set with a range of 0-60 seconds. If both the trip class and linear trip delay are set, the 777-LR-HRG-P2 will follow the faster trip time. Another feature is the automatic dry-well recovery timer that allows the unit to automatically select a restart delay based on the last cycle's run time. This allows the 777-LR-HRG-P2 to optimize