Clearwater Tech Logo
Loading
Home | Contact Us
(844) 331-9374

Sentrol Industrial

Home   >   Products   >   Interlogix   >   1125/R1125 Series   >   Magnetic Contacts

GE Security - Sentrol Industrial

(844) 331-9374       (888) 723-4773 (Fax)
info@clrwtr.com

1125 Series Recessed Stubby Press Fit with Wire Leads

The 1125 series stubby press fit magnetic contact is a 3/8-inch diameter switch designed specifically for applications where space is limited.

The 1125's short length makes it ideal for thin-framed windows and doors where longer units cannot be used. Press fit ribs on the housing make installation quick and easy.

Sentrol 1125 1125W Stubby Press Fit Magnetic Contacts with Wire Leads Distributor

1125 Series

If you are looking for GE Sentrol 1125 Series Magnetic Contacts, please call us on (844) 331-9374 or email us at info@clrwtr.com we will do our best to help you find the GE Interlogix 1125-N Series Position Sensors that you are looking for at the most competitive prices possible. If you are searching for Sentrol Industrial 1125M-10PKG Magnetic Door Contact technical information (data-sheets) please use the datasheets or product selection guide page links.

Drill 3/8" diameter holes 3/4" deep for both the contact and the magnet. Press them into their respective holes. Do not overdrill. Attach contact and magnet with RTV mounting compound or epoxy. Each electrical rating is an individual maximum and cannot be exceeded!

  • Press fit design makes installation easy no screws or glue needed
  • Small size perfect for thin-framed windows and doors
  • Good for use in vinyl-clad and custom windows
  • Ideal for pre-wiring; eliminates forcing switch and pre-wire into the same header hole
  • Available wider gap distance helps prevent false alarms caused by loosefitting doors and windows

1125T Series Recessed Stubby Press Fit with Terminals

The 1125T stubby press fit magnetic contact is designed specifically for applications where space is limited. The contact's short length makes it ideal for thin-framed windows and doors where longer units cannot be used.

The terminal connection adds to ease of installation. Simply strip the wire, insert it into the terminal block, and tighten. The terminal accepts any wire size from 14 to 22 gauge and has a special onepiece construction for added strength and durability.

Sentrol 1125T Series Recessed Stubby Terminal Contact Gap Size up to 3/4 3/8 Diameter Distributors

1125T Series

A wide gap model is available to protect against false alarms from loose-fitting doors and windows.

  • Drastically reduces installation time
  • Ideal for pre-wire installations
  • Terminals accept 14 to 22 gauge wire
  • Available wider gap distance helps prevent false alarms caused by loosefitting doors and windows

R1075T/R1125T Series MINI-MAX Magnetic Contacts with Terminals

Sentrol's R1075T/R1125T Series Mini-Max Terminal Contacts are Press Fit magnetic contacts with terminal connections and Mini-Max magnets. Mini-Max magnets deliver strong protection in a low-profile design - virtually eliminating the risk of window damage during installation. Just 1/8" thick, the magnets surface mount easily with glue, double-stick tape (included), or stainless steel screw (included).

The R1075T and R1125T contacts are designed specifically for applications where space is limited. The short length of the "Stubby" R1125T contact makes it ideal for thin framed windows and doors where larger units cannot be used.

Sentrol R1125T Series Mini-Max Recessed Stubby Press Fit Magnetic Contacts with Rare Earth Magnets and Terminals, 3/8 in. Dia. Distributors

R1075T/R1125T Series

The terminal connection adds to the ease of installation. Simply strip the wire, insert it into the terminal block and tighten. The terminal accepts any wire size from 14 to 22 gauge, and has a unique one piece design for added strength.

  • New terminal design for easy connection
  • Rare-Earth Magnet Technology delivers powerful magnetic force
  • Ideal for vinyl-clad and custom windows
  • Magnets mount easily with glue, double-stick tape, or stainless steel screw
  • Standard gap 1/2"; wide gap 1"

R1125 Series Mini-Max Recessed Stubby Press Fit Magnetic Contacts

The R1125 switch is a stubby press fit magnetic contact with a Mini-Max magnet. Mini-Max magnets deliver strong protection in a low-profile design and virtually eliminate the risk of window damage during installation. Just 1/8 inch thick, the magnets mount easily to any surface with glue, double-stick tape (included), or one stainless steel screw (included).

Sentrol R1125 Series Mini-Max Recessed Stubby Press Fit Magnetic Contacts with Rare Earth Magnets & Wire Leads, 3/8 in. Dia. Distributors
R1125 Series

The R1125 is designed specifically for applications where space is limited. Its short length makes it ideal for thin-framed windows and doors where larger switches cannot be used. Press fit ribs on the contact's housing make installation quick and easy. A wide gap model offers added protection for loose-fitting doors and windows.

  • Rare-earth magnet technology delivers powerful magnetic force
  • Magnets mount easily with glue, doublestick tape, or one stainless steel screw
  • Ideal for vinyl-clad and custom windows
  • Wide gap model available

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Sentrol Industrial 1125N-10PKG switches enabling us to further assist you in finding the correct 1125WBN-10PKG magnetic contact for your application in the USA, Canada and Mexico. Whether we have 1125WN-10PKG contact in stock in Boise, Idaho or need to ship direct from UTC Fire & Security to any USA cities; Clearwater Tech can get 1946N-10PKG contact to you fast and save money! It will be very helpful if you have R1125T-N contact part numbers ready, then our sales representatives can provide you with a pricing and availability quote for R1125TW-N magnetic contact that you are looking for in seconds. If you do not have the part numbers for R1075-N series contacts, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us.

IDEC E-Stops

IDEC's XW series of Emergency Stop switches include a revolutionary new technology called "safe break action" that will change the way E-Stop switches are designed. This innovative concept provides greater levels of human safety and is the first of its kind in the world. Conventional E-Stop switches are designed with spring pressure on the Normally Closed (NC) contacts, keeping them in the closed position and allowing the machine to operate. Improper installation

SymCom Monitors

The Unique Microcontroller-Based voltage and phase-sensing circuit constantly monitors the voltages to detect harmful power line conditions. When a harmful condition is detected, the MotorSaver's output relays are deactivated after a specified trip delay. The output relays reactivate after power line conditions return to an acceptable level and a specified amount of time has elapsed (restart delay). The trip delay prevents nuisance tripping