Clearwater Tech Logo
Home | Contact Us
(844) 331-9374

Sentrol Industrial

Home   >   Products   >   Aritech   >   2500 Series   >   Panel Door Contacts

GE Security - Sentrol Industrial

(844) 331-9374       (888) 723-4773 (Fax)

2500 Series Surface Mount Industrial Wide Gap

The 2500 Series is designed to be installed in commercial and industrial environments where a rugged sealed unit is required. It is ideal for metal doors, overhead doors, fences and gates. Each model features a high strength extruded aluminum housing and is completely encapsulated in our exclusive polyurethane potting compound. The 2500 series feature wide gap distances and several models to meet any application need. Jacketed lead or armored cable is available.

  • Wide gap distance for decreased installation time
  • Fewer false alarms
  • Fewer service calls
  • Six models including SPDT, DPDT and High Security
  • Mounting brackets available
Sentrol 2505 2505A 2507 2507A 2507AD 2507AH Industrial Wide Gap Surface Mount Magnetic Contacts Distributors

2500 Series

If you are looking for GE Sentrol 2500 Series Magnetic Contacts, please call us on (844) 331-9374 or email us at we will do our best to help you find the GE Interlogix 2507A Position Sensors that you are looking for at the most competitive prices possible. If you are searching for Sentrol Industrial 2507AD Door Contact technical information (data-sheets) please use the datasheets or product selection guide page links.

The contact shall be a hermetically sealed reed switch nominally 3" L x 1" H x 0.50" D with matching actuating magnet. Mounting holes shall be on 2" centers. Contact and magnets shall be in brushed anodized aluminum tube housing. Contact shall be sealed in our exclusive polyurethane potting compound. Right angle mounting bracket shall be furnished with contact, #1912. Contacts shall be specified as part numbers 2505, 2505A, 2507, 2507A, 2507AD, 2507AH.

Each contact shall connect to three feet of vinyl-jacketed cable (2505, 2507) or three feet of flex stainless steel conduit (2505A, 2507A). The contact shall contain two single-poled double throw reed contacts. Three feet of flex stainless steel conduit shall be permanently attached to the contact.

The contact shall be a Form C (SPDT) reed contact biased with an Alnico VII magnet. Contact will be difficult to defeat with an external magnet. Three feet of flex stainless steel conduit shall be permanently attached to the contacts.

2515A Series Maxi-Gap Industrial Extra Wide Gap Magnetic Contacts

The 2515A Maxi-Gap magnetic contact is designed for loose-fitting overhead doors. The contact helps prevent or correct false alarm situations created by doors that do not line up properly, sag, or that are loose and move with wind or vibration. The channel mount unit is equipped with the unique Maxi-Gap feature that allows a vertical gap distance of 6 inches and an overall side-to-side gap of 6 inches. The contact features a rugged extruded aluminum housing potted with GE Security's exclusive polyurethane potting compound.

  • Optimal Maxi-Gap configuration
  • Ideal for loose-fitting overhead doors
  • Fewer false alarms and service calls
  • Reduced installation time
  • Mounting hardware included
Sentrol 2515A Series Overhead Door Maxi-Gap Industrial Extra Wide Gap Magnetic Contacts Distributor

2515A Series

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Sentrol Industrial products enabling us to further assist you in finding the correct 2507AH magnetic contact for your application in the USA, Canada and Mexico. Whether we have 2505A-TIP contact in stock in Boise, Idaho or need to ship direct from UTC Fire & Security to any USA cities; Clearwater Tech can get 2505A-L contact to you fast and save money! It will be very helpful if you have 2507A-L contact part numbers ready, then our sales representatives can provide you with a pricing and availability quote for 2507AD-L magnetic contact that you are looking for in seconds. If you do not have the part numbers for 2500 series contacts, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:

Search Tips

Can't find a part number?
E-mail Us.

Red Lion Converters

The DC Power Input is isolated from the signal input and analog output. The unit scales the analog output proportionally to the RTD or resistance input signal. The analog output may be configured for one of the following: 0 to 20 mA, 4 to 20 mA, or 0 to 10 VDC. Making the signal conversion with the IRMA to a current output signal, makes the signal less susceptible to noise interference and allows accurate transmission over long distances.

IDEC Switches

The Slim Profile makes it easy to mount in locations out of the way of personnel and machine operation, reducing the possibility of damage or misalignment. The HS7A-DMP interlock safety switches have up to three contacts and provide a high-quality, space saving product at a competitive price. The auxiliary contacts enable PLCs to monitor the door status as operation signals can be read directly by controllers. HS7A-DMP Non-contact magnetic