Clearwater Tech Logo
Loading
Home | Contact Us
(844) 331-9374

Sentrol Industrial

Home   >   Products   >   Edwards Signaling   >   Mechanical Safety Switches

GE Security - Sentrol Industrial

(844) 331-9374       (888) 723-4773 (Fax)
info@clrwtr.com

FR 996 Hinge-Operated Safety Switches

These Industrial Hinge Operated Safety Switches utilize a rotating shaft to provide a positive means of turning the control power off should an access panel, door, gate, guard, etc. be rotated open during machine operation.

The switch operating shaft is designed to be in line with the rotation point of the door and uses the opening force of the door to rotate the safety switch operating shaft. When the access panel, door, gate, guard, etc. is rotated to the "open" position, the normally closed contacts in the safety switch are mechanically forced open turning off the control power in the machine - disabling the machine. Since the switch contacts can only be closed when the shaft is rotated to the closed position, the machine cannot be re-started until the door, gate, guard, etc. is closed.

Sentrol FR 996 Series Hinge-Operated Safety Switches Distributors
FR 996 Series

If you are looking for GE Sentrol Mechanical Safety Switches, please call us on (844) 331-9374 or email us at info@clrwtr.com we will do our best to help you find the GE Interlogix FR 996 Hinge-Operated Safety Switch that you are looking for at the most competitive prices possible. If you are searching for Sentrol Industrial FS 2096-D024-F Key-Operated Safety Switch with Solenoid technical information (data-sheets) please use the datasheets or product selection guide page links.

FS 2096-D024-F Key-Operated Safety Switches with Solenoid

GE Interlogix Industrial Key-Operated Safety Switches with Solenoid Release utilize a removable stainless steel key to provide a positive means of turning the control power off should an access panel, door, gate, guard, etc. be opened during machine operation. This series of switches also includes a solenoid built into the switch and is used to protect an area where access is to be strictly controlled. Prime candidates for this series of safety switches are equipment that cannot be shutdown in mid cycle, machines that have large mechanical inertia, high temperatures or other areas that cannot be immediately entered.

The Key Operated Safety Switch with Solenoid Release denies access to the protected area until the operator electrically allows the release of the key. There are two versions of the Key-Operated Safety Switch with Solenoid Release, Series "D" (de-energized) and "E" (energized). With the key removed, access is allowed through the guard, gate, etc., to be opened. Since the safety switch contacts can only be closed when the key is installed in the switch, the machine cannot be restarted until the guard, gate, etc., is closed. This re-establishes the protection around the machine.

GE Sentrol FS 2096-D24-F/FS 2096-E24-F Mechanical Safety Switches Distributor
FS 2096-D24-F/FS 2096-E24-F Series

FS 2096-D024-F Key-Operated Safety Switches with Solenoid

This key-operated safety switch insures that the machine cannot be re-started until the key is installed into the switch. The removal of the key forces the normally closed contacts to open into a safe condition. Return of the key forces the open contacts to close for machine operation.

When the key is removed from the switch, the normally closed contacts are mechanically forced open. This opens the safety circuit turning off the control power in the machine - disabling the machine. Since the switch contacts can only be closed when the key is installed in the switch, the machine cannot be re-started until the door, gate, guard, etc. is closed.

Edwards Key-Operated Safety Switches FR 692-D / FX 692-D / FD 693-F Series Distributors
FR 692-D/FX 692-D/FD 693-F Series

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Sentrol Industrial products enabling us to further assist you in finding the correct FR 693 switch for your application in the USA, Canada and Mexico. Whether we have FS 1896D024 switches in stock in Boise, Idaho or need to ship direct from UTC Fire & Security to any USA cities; Clearwater Tech can get FX 693 switch to you fast and save money! It will be very helpful if you have the FX992-D1 part numbers ready, then our sales representatives can provide you with a pricing and availability quote for FD978 switches that you are looking for in seconds. If you do not have the part numbers for FD983 switch, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Stock Check
Part No:
OR
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us.

SUNX Safety Screens

The Floating Blanking Function allows to disable up to three unspecified beam channels. Control output (OSSD) will not turn off as long as the number of interrupted beam channels is less than the set number of beam channels. This function is convenient when an obstruction moves inside the detection area during setup changes or when loading materials within the detection area of light curtain. The minimum sensing object will change when the floating

Weidmuller Relays

The WRS 24V DC SIL 3 safety relay from Weidmuller should be used in areas where a functionally safe switch-off is required. The SIL 3 components are capable of meeting the requirements of EN 61508. Weidmuller's new SAFESERIES safety relay is certified by TuV Nord in accordance with EN 61508 for the safety integrity level SIL3. This relay is equipped with a wide-range voltage input on the monitoring circuit from