GE Sentrol Industrial
GE Interlogix Industrial is a market leader in the development and manufacture of safety interlock switches and position sensors for industrial applications. Whether it's a new machine design or a retrofit to increase operator safety on an existing machine, GE Interlogix Industrial GuardSwitches and mechanical safety interlocks provide the best fit for your application.
1015 Series Recessed Mount with Wire Leads
The 1015 magnetic contact is designed with a flat side on the surface of the contact, which allows a flush fit on narrow surfaces.
This contact is recommended for use with casement windows, awning windows, and other areas where the contact must recess and fit into a narrow surface.
It installs quickly in a 1/4-inch diameter hole. Small fins on the housing of the magnet and switch eliminate the need for glue.
If you are looking for GE Sentrol Magnetic Contacts, please call us on (800) 894 - 0412 or email us at firstname.lastname@example.org we will do our best to help you find the GE Interlogix Position Sensors that you are looking for at the most competitive prices possible. If you are searching for Sentrol Industrial Position Sensors technical information (data-sheets) please use the datasheets or product selection guide page links.
1035 Series Surface Mount with Wire Leads
The 1035 series magnetic contacts save installation time through the use of a specially formulated 3M® adhesive tape.
The tape, which establishes a permanent bond between the contact and the surface, can be repositioned in the first five minutes.
A low profile and small footprint combine with reliable GE Security technology to make the 1035 series contacts a good choice for applicaitons where drilling holes is impractical.
A wide gap model is available to protect against false alarms from loose-fitting doors and windows. Clean surface with alcohol before attaching contact and magnet (this will improve the adhesion of the urethane foam to the surface).
1038/1038T Series Surface Mount with Wire Leads/Screw Terminals
The 1038T contact is designed for window and door applications where surface mounting is preferred.
Because of its sleek design, the 1038 contact is fast and easy to install.
The switch and magnet are incorporated into the housing, and the terminal blocks are angled for easy access.
In the unlikely event that the switch needs replacing, just push the housing down and slide it off.
1045/1045T Series Surface Mount with Wire Leads/Screw Terminals
The Sentrol 1045T series features a wider make distance, which permits faster installation, accommodates greater misalignment and works better on steel without time-consuming brackets.
A wider break distance helps prevent false alarms caused by loose fitting doors.
Sentrol-specified contacts keep the 1045 series from sticking or freezing on seldom-used doors.
1055 Series Recessed Mount with Wire Leads
The 1055 series of magnetic contacts is designed for tight-fitting installations. The 1/4-inch diameter makes the contacts perfect for applications such as casements or awning-style windows and security screens.
The contacts can be either recessed or surface mounted in window frame channels, and are difficult to detect in recessed door applications. A wide-gap model is available for loose-fitting doors and windows.
1058 Series Recessed Mount Stubby with Wire Leads
The 1058 series of magnetic contacts is designed for tight-fitting installations. The 1/4-inch diameter makes the contacts perfect for applications such as casements or awning-style windows and security screens.
The contacts can be either recessed or surface mounted in window frame channels, and are difficult to detect in recessed door applications.
Each contact includes a hermetically sealed reed switch that is potted in the housing.
1072 Series Recessed Mount Flanged with Wire Leads
The 1072 series recessed contacts are designed for applications where the added integrity of mounting screws is needed. The contacts work well in both wood and metal frame doors and windows.
The two mounting holes provide additional strength to prevent the contact and magnet from becoming dislodged due to environmental changes. Such changes may occur when the door or window frame warps and misaligns from moisture or the settling of a building. No. 2 sheet metal screws come with the switch. A wide gap model is available to protect against false alarms from loose-fitting doors and windows.
1075 Series Recessed Mount Press Fit with Wire Leads
The 1075 series press fit switch is a 3/8-inch diameter magnetic contact with wire leads that uses no glue or screws to mount. Small ribs on the housing hold the contact in place. Heavy-duty housing resists crushing from swelling wood.
Use indoors or outdoors for an attractive recessed installation. In addition to wood doors, the 1075 series is useful for protecting china cabinets or closets, double-hung windows, and aluminum windows.
R1075/R1125 & R1075T/R1125T Series MINI-MAX Magnetic Contacts
Sentrol's R1075/R1125 Series Mini-Max™ Contacts are Press Fit magnetic contacts with Mini-Max™ magnets.
The Mini-Max™ magnets are available for both the standard R1075 Press Fit and the "Stubby" R1125 Press Fit.
Sentrol's R1075T/R1125T Series Mini-Max™ Terminal Contacts are Press Fit magnetic contacts with terminal connections and Mini-Max™ magnets.
Mini-Max™ magnets deliver strong protection in a low-profile design - virtually eliminating the risk of window damage during installation.
Just 1/8" thick, the magnets surface mount easily with glue, double-stick tape (included), or stainless steel screw (included).
The R1075T and R1125T contacts are designed specifically for applications where space is limited. The short length of the "Stubby" R1125T contact makes it ideal for thin framed windows and doors where larger units cannot be used.
1078/1076 Series Steel Door Contacts
The 1078/1076 series recessed contacts are designed specifically for use in the steel doors commonly found in commercial building applications.
The unique housing design features a rugged unibody construction with flexible ribbed sides for quick, secure installation without gluing. The magnet housing isolates the magnet from the surrounding steel for maximum gap distances, both make and break. Over seven models including: Wide Gap, SPDT, DPDT, and Biased for High Security applications make the 1078 Series the most widely used and comprehensive line available.
1082 Series Surface Mount with Wire Leads
The 1082 series surface mount contacts are designed for use in installations where a larger sealed unit is required.
The reed switch is totally encapsulated in GE Security's exclusive polyurethane potting compound, which prevents moisture from entering the switch and causing false alarms.
The 1 inch standard gap distance allows for fast, easy installation and prevents false alarms due to loose-fitting doors.
Select desired mounting positions for switch and magnet.
For wide gap switches align labels on switch and magnet so labels read in the same direction.
1085/1085T Series Surface Mount with Wire Leads/Screw Terminals
The 1085 Series surface mount magnetic contacts are designed for use in installations where a small, sealed unit is required.
The reed switch is totally encapsulated in GE Security's exclusive polyurethane potting compound preventing moisture from entering the switch and causing false alarms.
The 5/8-inch standard gap distance allows for fast, easy installation and prevents false alarms from loose fitting doors.
The 1085T is ideal for residential and commercial applications where terminal connections are preferred.
The unit features positive clamping terminals with anti-rotation lugs and captured screws with combination heads.
These features allow for easy, quick installations.
1125/1125T Series Recessed Stubby Press Fit with Wire Leads/Terminals
The 1125 series stubby press fit magnetic contact is a 3/8-inch diameter switch designed specifically for applications where space is limited. The 1125's short length makes it ideal for thin-framed windows and doors where longer units cannot be used. Press fit ribs on the housing make installation quick and easy. The 1125T stubby press fit magnetic contact is designed specifically for applications where space is limited.
1138T Series Surface Mount with Terminals
The 1138T surface mount contact with terminals is designed for window or door applications where a surface mount contact is preferred. Thanks to its unique design, the 1138T is fast and easy to install. The switch and magnet are incorporated into the housings.
Simply mount the switch and magnet using the tape or mounting screws provided and connect the wire to the terminal blocks. The 1138T features an attractive, low-profile design and a 1" operating gap.
1275 Series Recessed Wing Fit with Wire Leads
Sentrol's 1275 Series 3/8" DIA. Wing Fit™ magnetic contact is ideal for new construction applications, where wood swell poses a potential threat to the contact housing.
The "wings" on the 1275 Series flex to hold the contact securely in place as the wood expands and contracts.
The 1" contact fits most recessed applications. Housing is made of flame-retardant polypropylene. Ideal for use in green wood, where normal swelling can crush a reed contact.
1285T Series Surface Mount with Terminals
The Sentrol 1285T Series surface mount magnetic contact is ideal for residential and commercial applications where terminal connects are preferred.
The unit features Sems style terminals that have selflifting washers and captured screws to prevent the screws from backing out.
The screws have combination heads that accept either Phillips or flat blade drivers.
The terminals are angled away from the mounting surface to allow for quick and easy installation. Snap-on covers conceal the terminals and mounting screws for a clean professional appearance. Wide gap, SPDT, and high security models are available.
2100 Series Heavy Duty Magnapull Magnetic Pull-Apart Cord
Magnapull™ magnetic pull-apart cords by Sentrol are used to protect valuable free-standing items that are stored outdoors. The high-impact plastic housing protects the contact from corrosion or high resistance buildup.
2200 Series Miniature Surface Mounts with Armored Cable
The Interlogix 2202 Series overhead door magnetic contact is for use in the rigorous environments of commercial and industrial installations.
The Interlogix 2202 Series overhead door magnetic contact is for use in the rigorous environments of commercial and industrial installations.
The floor mount units are constructed with a low profile heavy cast aluminum housing.
2300 Series Sectional/Panel Door Contacts
The Sentrol 2300 Series Panel Door magnetic contacts are designed specifically for panel or sectional style overhead doors.
The unique design allows the contact to be mounted directly to the door channel, with the magnet mounted vertically on the door - off the floor and out of harm's way.
This eliminates service calls and false alarms that occur when typical floormount contacts become damaged or as the door becomes misaligned with normal usage.
The contact's integrated mounting bracket is adjustable to fit most door channel widths. Installation requires no special tools and takes only a few minutes.
The 2300 Series contacts are constructed with a rugged extruded aluminum housing potted with Sentrol's exclusive polyurethane potting compound which makes the unit corrosion resistant.
2302 Series Track Mount Contacts with Armored Cable
GE Security 2302A Curtain Door magnetic contacts are designed specifically for curtain style overhead doors. The unique design allows the contact to be mounted directly to the channel of the door, with the magnet mounted horizontally in the door slats, off the floor and out of harm's way.
This eliminates the service calls and alarm situations that are created when typical floor-mount contacts become damaged, or as the door becomes misaligned with normal usage. The interlocking mounting bracket adjusts to fit any size channel width.
2500 Series Surface Mount Industrial Wide Gap
The 2500 Series is designed to be installed in commercial and industrial environments where a rugged sealed unit is required. It is ideal for metal doors, overhead doors, fences and gates.
Each model features a high strength extruded aluminum housing and is completely encapsulated in our exclusive polyurethane potting compound.
The 2500 series feature wide gap distances and several models to meet any application need. Jacketed lead or armored cable is available.
2700 Series High Security Surface Mount
The 2700 Series High Security magnetic contacts with triple-biased reeds are highly resistant to defeat by external magnets. For added security, magnetic field tamper and pry tamper are standard features.
Each 2700 contact and actuation magnet set is factory compensated for the effects of steel. All 2700 Series contacts are accepted by the Defense Intelligence Agency.
They are listed in DIAM 50-3 for use in secure compartmented information facilities (SCIFs). 2700 Series High Security magnetic contacts are UL listed. Two models are listed for use on safes and vaults.
2800 Series Surface Mount Maximum-Security with Terminals
The Sentrol 2800T Series magnetic contacts are designed for High Security hazardous environments. The rugged die-cast aluminum housing with conduit fittings meets UL requirements for hazardous locations. The contacts are balanced, triple-biased SPDT switches that make defeat with external magnets virtually impossible. The contacts feature tamper circuits that are actuated by removal of the face plate or by introduction of an external magnet. The terminals are located inside the housing providing additional protection from tampering or accidental shorting.
3005 Series Recessed Roller Plunger
The 3005 roller plunger contacts save installation time while providing reliable magnetic contact security. The contact switch is activated when the door opens, releasing the tension on the wheel plunger. Drill only one hole to mount the 3005 roller plunger - the entire magnetic contact is housed in an economical single unit. Recessed mounting hides the contact within the frame of the door it protects.
The roller plunger wheel is designed to operate with a smaller surface area in contact with the door. This reduces the likelihood that dirt and other debris will clog the mechanism. The specially designed ABS plastic housing protects the roller wheel from pressure exerted by swelling wood that could cause ball plungers to jam in place.
3010 Series Recessed Pin Plunger
The 3010 is a low voltage position sensor with an adjustable screw on the plunger.
This switch is often used on panel doors and is available as a recessed plunger switch, a clip mount plunger, and a tamper switch.
Model 3015 available in plate mount or clip mount configuration.
3040 Series Panic Switch
The Sentrol 3040 Series Panic Switch activates the SPDT switch (SPST on the 3045 model) when the user pulls the actuating lever. On the 3040 model, an external LED lights and latches, indicating that the alarm circuit has been activated. The lever is closed first to rearm the alarm switch, then the latching LED circuit is reset externally at the host panel. The 3045 model has no LED or latching circuit.
The 3050 and 3055 feature a glowing LED for low light visibility. The LED glows green when powered up, turns red upon activation. The 3050 contains a latching LED, the 3055 is non-latching.
Mounted out of sight but within easy reach for manual activation, such as under desks or counters in banks, jewelry stores and other facilities where people or property are at risk. The 3045 and 3055 models can be used in residential installations when a panic switch is needed. Models with the LED and latching circuit, can be used as a panic switch in medical care facilities. All models provide low-profile and reliable alarm protection.
1005 Series Mini Magnapull Magnetic Pull-Apart Cord
The 1005 Magnapull contact is pecifically designed to protect valuable free-standing items, such as office equipment, video systems, art objects, and gun cabinets. Positive magnetic retention limits false alarms. End users simply insert the cable into the contact housing; there is nothing to line up.
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Sentrol Industrial products enabling us to further assist you in finding the correct recessed press fit large magnet contact for your application in the USA, Canada and Mexico. Whether we have recessed press fit Mini-Max contact in stock in Boise, Idaho or need to ship direct from UTC Fire & Security to any USA cities; Clearwater Tech can get 1078 series steel door contact to you fast and save money! It will be very helpful if you have the surface screw mount long gap contact part numbers ready, then our sales representatives can provide you with a pricing and availability quote for surface screw mount terminal contact that you are looking for in seconds. If you do not have the part numbers for recessed stubby press fit contact, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
Sensors from the Extra pressure range detect parts at sensing distances up to 2.5 mm, and offer a highly attractive total cost of ownership. Sensors from this range use either Classics, Extra Distance or Full Inox technology and have equivalent electrical properties. The Extra pressure range is also ideal for high-vacuum environments and satellite applications, offering fit-and-forget capability and a sealed cable-entry
In a Typical Application, two safety switches (individually mounted) indicate the open or closed status of a gate, moveable guard, or barrier (all called "guards" throughout this document). The Safety Module monitors each switch for complementary switching; each channel must have one open (OFF) input and one closed (conducting) input at all times. These inputs must always be in opposite states and