Energy Efficient Dry-Type
Low Temperature Rise
K-Factor
The International Series
April 12, 2010

Weidmuller Power Supply

Weidmuller's Battery Back Up Unit (BBU) is designed to be the heart of an uninterruptible DC power management system. The connectPower BBU combines with Weidmuller power supplies and a customer-supplied battery pack to form a scalable DC power system. This enables users to put together a system uniquely tailored to their needs. These full-featured units have all the diagnostics needed to monitor the status of the power system.

ABB Contactors

Contactors & Overload Relays are suitable for a large variety of applications in building and in industry such as motor control, heating and ventilating, air conditioning, pumping, lifting equipment, lighting, process power factor correction, etc. The range comprises 4 and 5.5 kW mini, block up to 560 kW (AC3), installation for domestics and industrial use, bar-mounted, thermal and electronics overloads
Wind-Energy Contactor

SOLA HEVI-DUTY

Loading

Home   >   Products   >   Appleton  >   Distribution   >   Transformers

Sola Hevi Duty

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

SolaHD Energy Efficient Dry-Type General Purpose 600V Class Transformers Distributor
Energy Efficient Dry-Type

Energy efficient dry-type transformers 600 Volt Class, isolation type, single and three phase, 15 kVA through 500 kVA. Indoor and outdoor models available.

  • High efficiency for low cost operation
  • Compliant to NEMA TP-1 Standards
  • UL Class 220°C insulation system, 150°C temperature rise under full load
  • Single and three phase availability
  • Electrostatically shielded for quality power
  • Wall mount ing brackets (500 lbs maximum) (Item WB1C)
  • UL-3R ventilated outdoor enclosures when used with optional weather shields

If you are looking for Sola Distribution Transformers, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Ventilated General Purpose Transformer that you are looking for at the lowest prices possible. If you are searching for K-Factor Transformer technical information (data-sheets) please use the Sola Distribution Transformer Datasheets or Product Selection Guide page links.

SolaHD Low Temperature Rise Transformers Distributor
Low Temperature Rise

Sola Hevi-Duty's low temperature rise transformers feature a 220°C insulation system and temperature rise of only 80°C or 115°C under full nameplate load. The result is 13-21% lower operating losses than conventional 150°C rise units.

  • Shielded for quality power
  • UL-3R outdoor enclosure with optional weather shield
  • Thermal reserve allows for continuous overload operation at 150°C rise
  • Aluminum windings for greater insulation life
  • Class 220°C insulation system, 115°C or 80°C rise
  • Single and three phase availability
Sola HD K-Factor Transformers Distributor
K-Factor

The International series Sola transformers fully comply with IEC and NEMA standards and are available with IEC touchproof covers (IP20).

  • Epoxy encapsulated for cooler operation
  • Interleaved copper windings reduce I2R losses and maximize efficiently
  • Rated for 50/60 Hz Except as Noted
  • 55°C Rise, 105°C insulation system for harsh, heavy duty applications
  • Exceeds IEC, NEMA, ANSI, NMTBA, JIC and automotive standards
  • Copper Wound for Constant Reliability
Appleton TRE Series Ex e Transformers Distributors
TRE Series

Applications:

  • Equipment transformers are useful where the available voltage must be changed to accomodate the voltage required by the load and safety voltage.
  • Suitable for use in certifi ed increased safety enclosures and OEM increased safety applications.
  • Requires primary and secondary protection by fuses or Branch Circuit Breaker.

Features:

  • Single phase 50/60 Hz.
  • Class I.
  • Circuit insulation voltage between:
    • 4500 V between windings.
    • 2300 V between primary winding and earth.
    • 1800 V between secondary winding and earth.
  • Ex e Terminals capacity 4 mm2.

Our Low Temperature Rise Transformer Distributors warehouse in Boise, Idaho stocks some Sola Heavy Duty products enabling us to further assist you in finding the correct Copper Wound Transformers for your application in the USA. Whether we have K-Factor Transformers in stock in Boise, Idaho or need to ship direct from Sola Hevi Duty to any USA cities; Clearwater Tech can get Low Temperature Rise Transformer to you fast and save you money! It will be very helpful if you have the Sola Distribution Transformer part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Ventilated General Purpose Transformers that you are looking for in seconds. If you do not have the part numbers for K-Factor Transformers, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

600V Isolation Type Transformers
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

1-Phase & 3-Phase Transformer
Shielded Transformer
Epoxy Encapsulated Transformers
Clearwater Tech   © 2010 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY SITE INDEX