(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

The SDN DIN Rail Power Supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility in demanding applications. Power factor correction to meet European directives, hazardous location approvals and optional redundant accessories allow the SDN series to be used in a wide variety of applications. Wide operation temperature range, high tolerance to shock and vibration and reliable design make the SDN series the preferred choice of users everywhere.

• Power Factor Correction (per EN61000-3-2)
• Auto Select 115/230 Vac, 50/60 Hz Input
• Single Phase models meet SEMI F47 Sag Immunity
• Class 1, Div 2 Hazardous Locations

If you are looking for Sola Power Supplies, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Sola Hevi Duty Power Supply that you are looking for at the lowest prices possible. If you are searching for Sola Linear Power Supply technical information (data-sheets) please use the Sola Heavy Duty Datasheets OR Product Selection Guide page links.

The SDN-C DIN rail power supplies are the next generation of the popular SDN series. These models combine high efficiency and compact size with new visual diagnostic LEDs to offer the most performance available from Sola/Hevi-Duty. Essential industrial features such as Sag Immunity, Power Factor Correction, and universal voltage input have been retained in this series. Wide temperature operating range and parallel operation capability make the new SDN-C units suitable to a variety of industrial applications.

• Compact packaging to save space on the DIN rail
• New visual diagnostics LEDs for input and output status
• High MTBF means high reliability and long life
• Higher efficiency saves energy and lowers amount of heat generated in panel
• PowerBoost overload capability to start high inrush loads

The SDN 4-24-100LP has the highest output current possible while still meeting the requirements for NEC Class 2 and UL 1310. This is necessary for installations to meet the National Electrical Code (NEC) or the Canadian Electric Code (CE code) without the need for secondary fusing. The SDN 10-24-100P is designed for installations that utilize the full 8A capability of the Thick Cable system.

• Power Factor Correction
• SEMI F47 Sag Immunity
• Class 1, Div 2 Hazardous Locations
• DC OK Signal
• Industrial grade design

The SDN Series standard options allow for operation in a wide variety of applications. With the addition of an external redundancy module, the SDN can also be used for true redundant operation including 2N and N+x configurations. All SDN units include built in current sharing for parallel and redundant operation. All models ending in P also include a DC OK status relay contact. The external modules SDN 2.5-20RED and SDN 30/40RED increase the reliability by isolating the supplies and adding more signal options. Paralleling for increased power does not require the use of these modules.

• DC OK Relay Contact
• True Isolation
• High availability
• SDN features and quality

The SCP-X is a rugged power supply designed for use in extreme environments. The metal case reduces costs by eliminating separate enclosures. Quick change connectors simplify connectivity for distributed I/O devices on industrial machinery. This model provides 24 Vdc output with limited power to meet Class 2 requirements. Three models are currently offered based on application.

• IP66/67 Versatile/NEMA 4X Rated
• 24 Vdc, 115/230 Vac, 3.8A Nominal Current
• Listed power supply for stand alone applications
• Can be mounted in any orientation without limitation

The compact, lightweight Sola SDP DIN Rail power supplies come in output voltages from 5 to 48 VDC and power ratings of up to 100 Watts. These extra small, efficient units are designed specifically for the industrial environment.

• Ultra slim 15W footprint, Adjustable output
• No tools required for mounting
• PowerBoost industrial overload design
• Overvoltage & Continous short circuit protection
• NEC Class 2 current limited
• Low output noise
• Screw terminal connections

Sola SCP switchers are compact, rugged power supplies designed to power many of your industrial control and instrumentation devices and equipment, with high reliability and tight regulation through the most difficult factory-floor conditions around the world.

• International approvals for global use
• DIN Rail or Chassis Mount
• Rugged, encapsulated design to resist environment
• IP20 protection
• Many output voltages, 3.3-48 Volts; single, dual, triple

The Sola 4 and 10 Watt encapsulated linear power supplies are available in dual and triple outputs for applications with sensitive electronics and analog circuitry. The rugged enclosed encapsulated package, with Screw Terminals and DIN Rail clips, make for easy installation and maintenance. These low-noise power supply modules are capable of being DIN Rail or Chassis mounted.

• Quiet, low noise DC Linear technology
• DIN Rail or Chassis mount for easy installation
• Rugged encapsulated design
• Global specifications, including CE and UL 508

These compact, rugged Sola DC to DC converters are power supplies designed to power industrial control instrumentation devices and equipment where AC power is not convenient or accessible. With high reliability and wide input range, these units can operate through the most difficult factory-floor conditions around the globe. Terminations are also easy to access and simple to wire.

• DIN Rail or Chassis Mount (by removing the DIN clip)
• Rugged, encapsulated design to resist environment
• IP20 protection
• Wide 20 VDC to 72 VDC input range

The SFL series is a DIN Rail switching power supply series that complements the Sola SDN products with more input voltage, output voltage and power levels to give an even broader range of industrial DC power solutions.

• DIN Rail Mount regulated switch mode power supplies, Selectable input: 115/230 VAC
• 12 V, 24 V, and 48 V outputs available from 1.5-24 A, Output voltage adjustable
• Easy-to-wire pluggable and screw terminal connectors
• Fully Integrated Redundant and Remote Control Options
• Models with optional battery back-up available

The Silver Line (SL) series follows the industry accepted footprint for open frame, linear power supplies. Sola improves on this design by offering standard screw terminal connections and optional covers for safety considerations.

• Easy-to-install screw terminal connections
• Cover options
• Industry standard footprint
• Universal input and approvals (115/230 VAC)
• Low noise, extremely quiet DC output for noise sensitive or analog circuitry
• Fast transient response. Ideal for test applications.
• Built-in OVP on 5 V models and optional on 12, 15 and 24 V models
• Automatic resetting overload protection
• Short circuit protected

• Full range adjustable output voltage and current
• Universal 120/240 VAC, 50/60 Hz input
• Single supply for multiple applications
• Parallel operation for increased power output
• UL Recognized

These compact, low profile, AC/DC switching power supply products offer universal input voltage with no switches or jumpers, ideal for higher volume worldwide applications. 40 watt through 110 watt are printed circuit board design with pin and socket connections, 200 watt models are enclosed with internal DC brushless fan and screw terminal connections.

• Universal input
• Compact size
• Industry standard size (3 x 5", 40 Watt)
• On board input fuse
• Automatic overload protection
• OVP on Output #1
• UL Recognized, CSA Certified, TUV, CE, LVD
• 100% Burn-In
• Power fail signal on 110 and 200 Watt model
• 200 Watt enclosed with screw terminals

These high power, Sola heavy duty modular power supplies, from 1500 through 2000 watts, are capable of up to 12 independent outputs.

• Capable of up to 12 outputs, Single output 24V up to 87.4 A
• IEC 801 immunity standards, Current Share on all outputs
• End mounted fan, Voltage adjustment on all outputs
• Overload protection on all outputs, Margining on all outputs
• Global and individual module inhibits/enable
• Single Phase and Three Phase Inputs
• Modular construction, Power Factor Corrections (0.99 typ.)

These medium power, Sola super slim modular power supplies, from 250 through 1000 watts, are capable of up to 12 independent outputs.

• Worldwide safety agency approval (UL, CSA and CE)
• 250, 350, 450, 600 & 1000 Watt Power Platforms
• Meets IEC1000-3-2, Power Factor Corrections (0.99)
• 800 Watts for 115V/1000 Watts on 240 VAC
• Universal AC Input (90-264 V)*, Single wire current share
• Power fail TTL signal, Cover and End mounted fan
• Capable of up to 12 independent outputs
• Highly accelerated life tested (HALT)
• Fully isolated outputs, Thermal overload protection
• MTBF demonstrated >500,000 hours