SOLA HEVI-DUTY

Home   >   Products   >   SolaHD  >   Surge & Noise Protection

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

Sola Hevi Duty's STV 100K series is a hardwired surge protective devices are designed for installation at the service entrance, branch panel or a dedicated sensitive electronic load. These units feature all mode protection, LED and audible alarm status indication, sine wave tracking and form "C" dry contacts.

The STV 100K series also contains the highest levels of safety built into the product including thermal fusing and a fault current fusing level of 65 kAIC. 100,000amp peak current rating provides all-mode protection against severe transients. 65 kAIC fault-current fusing level provides safety and NEC conformance.

If you are looking for Sola Surge Suppressors, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the STV 100K Series that you are looking for at the lowest prices possible. If you are searching for STV 200/400K Series technical information (data-sheets) please use the Sola Surge Protection Datasheets OR Product Selection Guide page links. Please use Data/Signal Line Surge Protection page for Automated Controls, Telecommunications and Fire/Alarm/Security System over voltage suppression information.

Sola Hevi-Duty STV 200/400K Series offers continuous protection from damaging voltage transients and electrical noise commonly found at the service entrance or distribution panel. The modular design of the STV 200/400K allows for installation flexibility and its' robust design allows for installation in the most severe exposure locations.

They are capable of handling the high-impulse, potentially damaging transients commonly found at the service entrance or distribution panels. The modular design of the STV 200/400K allows for installation flexibility. Its robust design allows for placement in the most severe exposure locations.

Sola Hevi Duty STV 25K series provides point-of-use protection, at the dedicated equipment level, against damaging transients. Ideal for installation in electronic control cabinets found in harsh industrial environments such as the factory floor or at remote locations. These devices provide 50,000 amps of surge protection, sine wave tracking, LED status indication and form "C" dry contacts.

This DIN Rail series also provides protection on all electrical paths and comes with a standard ten year product warranty. The STV 25K DIN Rail series surge protective devices are UL recognized to Standard 1449, 2nd Edition.

The SolaHD STF Series offers the original active tracking technology to guard against commonly occurring but very damaging lower-energy transients. Offering excellent noise reduction, the filter continuously tracks the input AC power line and responds instantly upon detecting extraneous high-frequency noise.

The STF Series eliminates low voltage/high frequency noise via a low-pass or L-C filter. These filters are used for low-energy, high-frequency noise reduction and consist of a series of inductors, capacitors and resistors. STFs are load-dependent, which means that the series inductors located on each phase and neutral conductors are sized to handle the maximum current draw on the line. These inductors, together with the capacitors and resistors, form a circuit capable of absorbing a large bandwidth of noise.

The SolaHD STFV Plus Series combines Active Tracking filtration for low-energy-noise and surge suppression for high-energy transients. It continuously tracks the input AC power line, responding instantly upon detecting extraneous high-frequency noise and high-voltage transients caused by everyday events such as turning on machinery, motors or equipment.

These devices are designed to meet UL 1283 for Electromagnetic Interference Filters. The STFV Plus series attenuates or reduces the amplitude of high-frequency noise to a maximum of 90dB that occurs in a range of 100 kHZ to 50 MHz. It provides the industry's best IEEE C62.41 Category "A & B" Ringwave protection.

The Sola Hevi Duty STFE Elite DIN Rail Mount Series combines Active Tracking technology with UL Listed surge protection to protect against the full spectrum of voltage transients and surges. It continuously tracks the input AC power line responding instantly into action upon detecting extraneous high frequency noise and high voltage transients caused by everyday events such as turning on machinery, motors, or equipment.

These devices are designed to meet UL 1449, UL 1283, cUL recognized, and CE. STFE attenuates or reduces the amplitude of normal mode noise to a minimum of 90dB that occurs in a frequency range of 100KHz to 50MHz, and of common mode noise to a minimum of 60dB that occurs in a frequency range of 5MHz to 50MHz. STFE provides the industry's best IEEE C62.41 Category "A & B" Ringwave protection.