Power Supply
Transformer
UPS
Line Conditioner
April 22, 2010

IDEC Power Supply

The new Like All Switching Power Supplies, the PS5R Slim Line series has worldwide approvals, spring-up Screw Terminals, fused inputs, and Overload Protection. They are DIN Rail or direct surface mountable and have universal (85 - 264V AC) voltage inputs. No derating means you can save money, space, and time.
PS5R Slim Line Series

TCI Filters

The H5 Series Active Line Conditioner monitors the load current, reacting to changes in load almost instantaneously, while returning the true power factor to near unity. This dual duty product accomplishes both objectives immediately upon installation without the need for a special commissioning process.
Load Current Monitors

SOLA HEVI-DUTY

Home   >   Products   >   Sola Hevi-Duty

Sola Hevi Duty

(800) 894-0412       (208) 368-0415 (Fax)
info@clrwtr.com

Sola Hevi Duty SDN Series DIN Rail Mounted Power Supply Distributors
Power Supplies

Sola SDN DIN Rail power supply products provide industry leading performance. Sag immunity, transient suppression and noise tolerant, the SDN series ensures compatibility in demanding applications.

  • Power Factor Correction (per EN61000-3-2)
  • Auto Select 115/230 VAC, 50/60 Hz Input
  • Single Phase models meet SEMI F47 Sag Immunity, Adjustable Voltage
  • Class 1, Div 2 Hazardous Locations
  • Improved metal mounting clip, DC OK Signal
  • Parallel Capability standard on all units
  • Broad range ( 2.5 A through 40 A) of product to fit almost any application

If you are looking for EGS Electrical Group Products, please call us on (800) 894 - 0412 or email us at info@clrwtr.com we will do our best to help you find the Sola Hevi Transformers that you are looking for at the lowest prices possible. If you are searching for Sola UPS (Uninterruptible Power Supply) technical information (data-sheets) please use the SolaHD Datasheets OR Product Selection Guide page links.

Sola Hevi Duty General Purpose Ventilated Distribution Transformers Distributor
Transformers

The Energy Policy Act of 2005 (H.R. 6) requires Distribution Transformers manufactured after January 1, 2007 to meet specific energy efficiency requirements. EPAct 2005 defines the term "distribution transformers" as any transformer which:

  • Has an input voltage of 34.5 kV or less
  • Has an output voltage of 600 V or less
  • Is rated for operation at a frequency of 60 Hz
  • Has a capacity of 10 kVA to 2500 kVA for liquid-immersed units and 15 kVA to 2500 kVA for dry-type units
Sola Hevi Duty S2K Series Line-Interactive UPS Distributors
Uninterruptible Power Systems

One of the most compact line-interactive model on the market, the S2K Series Sola UPS's protect against most severe power disturbances including over/under voltages through state of art, line-interactive technology.

  • Automatic Voltage Regulation (AVR) topology - saves battery power for deep sag situations when input voltage is below 78V.
  • Stepped sinewave output (Battery mode).
  • Selectable input voltage (110, 120 or 127 VAC).
  • Full sequence, automatic bi-weekly battery testing.
  • User replaceable, "hot swappable" batteries (Shutdown for battery replacement not required).
  • MultiLink Power management software is available online, 350 - 1000 VA
  • Protects against most adverse power conditions.
Sola Hevi Duty MCR Hardwired Constant Voltage Transformers Distributor
Line Conditioning

The MCR Hardwired Series Sola Constant Voltage Transformer provides excellent noise filtering and surge suppression to protect connected equipment from damage, degradation or misoperation.

  • VA Ratings: 120 to 15,000 VA. Input Voltage Range: +10/-20% of nominal
  • ±3% output voltage regulation
  • Acts as a step-up or step-down transformer
  • Galvanic isolation provides exceptional circuit protection
  • 25 year typical MTBF (Mean Time Before Failure)
  • Noise Isolation: 120 dB common mode; 60 dB normal mode
  • Surge Suppression: Up to 6,000 Volt surges
Sola Hevi Duty Surge Suppressors Distributors
Surge Suppression

Surge suppressor/protection devices are an effective and economical way to protect critical, microprocessor based equipment/applications from the damaging effects of transients.

Transient voltage spikes can be generated externally due to lightning, utility grid switching and electrical accidents or internally due to copiers, generators and large motors. Sola surge suppressors quickly divert the high energy transients to levels that are safe for AC equipment. Sola Hevi Duty's industrial surge suppressor/protection devices protect equipment with low clamping levels on all electrical paths.

Sola STF Series Active Tracking Filters Distributor
Active Tracking Filtering

Low-energy transients and high-frequency noise are the primary causes for system disruption and long-term degradation of microprocessor-based equipment within your facility. For more than 30 years, our Active Tracking Filters have proven to be the most effective solution in critical equipment protection within harsh industrial environments. Active Tracking Filters are built upon a unique multi-stage hybrid design. This design creates a foundation for a family of products that attenuate impulses that would normally go untouched by standard, parallel clamping devices. Changing technology and dependence on total automation processes within modern facilities create a critical need for clean AC power at the equipment level. Active Tracking Filters are a perfect solution for your microprocessorbased products, including industrial PLCs, OEM applications and motion control systems.

Sola Hevi Duty STC-642 Data Signal Line Protection Distributors
Data/Signal Line Surge Suppressors

The SolaHD STC series protects all susceptible low voltage cable routes entering a facility and at key points within the building. These devices can be used as part of a multi-stage protection strategy that involves clamping the initial high-energy impulse, filtering any remaining noise or transients to the PLC or sensitive equipment and, finally, protecting the data/signal lines entering and leaving the control panel. Modern, networked industrial facilities require error-free transmission of information for maximum productivity and data integrity. The hybrid design of these Data/Signal Line surge suppressors allows them to respond quickly with high energy absorption. These units are available in a variety of application-specific voltage levels and packaging configurations. The STC series is used to protect network signal lines entering or leaving control panels, including PLCs, universal remote I/O, DeviceNet and Data Highway Plus.

Our Industrial Factory Automation Products Distributors warehouse in Boise, Idaho stocks some of Sola Heavy Duty products enabling us to further assist you in finding the correct Power Supply for your application in the USA. Whether we have Transformer in stock in Boise, Idaho or need to ship direct from Sola Hevi Duty to any USA cities; Clearwater Tech can get Sola power supplies to you fast and save you money! It will be very helpful if you have the Sola Heavy Duty part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Power Conditioner that you are looking for in seconds. If you do not have the part numbers for UPS, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

Surge Protective Devices
Part Number:
Manufacturer:

Search Tips

Can't find a part number?
E-mail Us!

Surge Suppressor
Line Reactors
Active Tracking Filter
Clearwater Tech   © 2010 PRIVACY POLICY TERMS OF USE LEGAL INFO USAGE POLICY SITE INDEX