SBE Series Encapsulated
SBE Open Style
HSZ Series
April 24, 2012

SymCom Monitor

When a Harmful Condition is detected, the MotorSaver's output relay is deactivated after the specified trip delay. The output relay reactivates after power line conditions return to an acceptable level for the programmed amount of restart delay time (RD2). The Model 601 can be used as a stand-alone product or the communication port can be used to form a network and monitor the motors with a SymCom remote monitor and/or SCADA, PLC, or PC.


ProteCT Series current transformers by NK Technologies are intended for use with APT and APO/APN Series power transducers. ProtectCT low voltage output current transformers provide easy sensing of current on three-phase applications with the added safety of a 333 mV output secondary. Available in split-core case as standard.

Sola Hevi Duty

Home   >   Products   >   Sola  >   Industrial Control   >   Transformers

Sola Hevi Duty

(800) 894-0412       (888) 723-4773 (Fax)

SolaHD SBE Encapsulated Series Industrial Control Transformers Distributor
SBE Series Encapsulated

SBE Encapsulated industrial control transformers are epoxy encapsulated to seal the transformer windings against moisture, dirt and industrial contaminants. Extra deep, molded terminal barriers reduce the chance of electrical failure as the result of arcing or frayed lead wires.

  • 55°C Rise, 105°C Insulation to Minimize Heat
  • 10-20% More VA Capacity
  • Superior Voltage Regulation
  • UL Listed and CSA Certified
  • Rated for 50 or 60 Hz Use
  • Epoxy Encapsulated Design

If you are looking for Sola Industrial Control Transformers, please call us on (800) 894 - 0412 or email us at we will do our best to help you find the SBE Encapsulated Series that you are looking for at the most competitive prices possible. If you are searching for IEC International Transformer technical information (data-sheets) please use the datasheets or product selection guide page links.

SolaHD SBE Series Copper Wound Open Style Design Industrial Control Transformers Distributors
SBE Series Open Style

The open style SBE Series provides voltage regulation in excess of NEMA recommendations without exceeding 55oC rise. These higher power capacity transformers are the best choice when 80% or more of the load components are electromagnetic devices.

  • Interleaved copper windings reduce I2R losses and maximize efficiency.
  • Ratings 60 Hz unless noted 50/60 Hz
  • Meets or exceeds electrical requirements of NEMA, ANSI, NMTBA and JIC
  • 55°C rise, 105°C insulation system
  • High quality silicon steel core
SolaHD HSZ Series Industrial Control Transformers Distributor
HSZ Series

The HSZ series of industrial control transformers are designed for applications requiring special mounting and are available in ratings from 1 through 10 KVA.

  • Two case styles available, UL-3R and NEMA-12
  • Stainless steel (NEMA 3R & 4X) enclosures are also available
  • UL Class 180°C insulation system, 80°C temperature rise under full load
  • Meets or exceeds NEMA regulation standards
  • Copper magnet wire windings
  • Encapsulated
SolaHD International Series IEC & NEMA Industrial Control Transformers Distributor
International Series

The International series Sola transformers fully comply with IEC and NEMA standards and are available with IEC touchproof covers (IP20).

  • Epoxy encapsulated for cooler operation
  • Interleaved copper windings reduce I2R losses and maximize efficiently
  • Rated for 50/60 Hz Except as Noted
  • 55°C Rise, 105°C insulation system for harsh, heavy duty applications
  • Exceeds IEC, NEMA, ANSI, NMTBA, JIC and automotive standards
  • Copper Wound for Constant Reliability
SolaHD SMT Series Aluminum Wound Open Style Design Industrial Control Transformers Distributor
SMT Series

Sola Hevi/Duty SMT series transformer is economical and compact with traditional open wound varnished coils. Ratings are from 1 KVA through 5 KVA with Class 180°C insulation system and 115°C rise under full load. SMT transformers provide excellent cost benefits with NEMA regulation characteristics and electrical performance specifications.

  • Available from 1000-5000 VA, 60 Hz unless noted
  • Meets or exceeds electrical requirements of NEMA, ANSI, NMTBA and JIC
  • UL Listed (File #E77014)
  • CSA Certified (File #LR-14328-12)
SolaHD ICE International Series 750 To 2000 VA Transformers Distributor
ICE International Series

International CE marked Sola transformers include IP20 touchproof terminations and copper windings in an encapsulated design.

  • IP20 touch-proof terminals
  • Epoxy encapsulated for cooler operation and increased reliability
  • 80°C rise temp, 130°C insulation system for harsh, heavy-duty standards
  • 50/60 Hz Frequency
  • Meets or exceeds electrical requirements of NEMA, ANSI and IEC
  • CE marked and cULus listed

Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some Sola Heavy-Duty products enabling us to further assist you in finding the correct SBE Series Open Style transformer for your application in the USA. Whether we have ICE International Transformer in stock in Boise, Idaho or need to ship direct from Sola Hevi Duty to any USA cities, Clearwater Tech can get SMT Type Transformer to you fast and save you money! It will be very helpful if you have the Sola Industrial Control Transformer part numbers ready, then our sales representatives can provide you with a pricing and availability quote for HSZ Series Transformers that you are looking for in seconds. If you do not have the part numbers for SBE Encapsulated Series Transformer, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.

SMT Series
Part Number:

Search Tips

Can't find a part number?
E-mail Us!

ICE International Series
CE Marked Transformers
IEC & NEMA Standards Transformers